Jobs in PunjaiThottakurichi, Karur

An Aircraft Maintenance Engineer (AME) is responsible for inspecting, maintaining, repairing, troubleshooting, and certifying aircraft to ensure they are safe, airworthy, and compliant with aviation regulations. The role involves carrying out scheduled and unscheduled maintenance on aircraft systems, engines, avionics, electrical components, hydraulic systems, landing gear, and structural components while adhering to the standards established by aviation authorities.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine, preventive, scheduled, and unscheduled aircraft maintenance.Conduct daily, transit, weekly, A-check, B-check, C-check, and heavy maintenance inspections.Inspect aircraft structures, fuselage, wings, landing gear, flight controls, and engines.Diagnose and rectify aircraft defects using approved maintenance procedures.Replace, repair, and overhaul defective aircraft components.Ensure all maintenance tasks are completed according to the Aircraft Maintenance Manual (AMM).Troubleshooting & RepairsIdentify mechanical, hydraulic, electrical, pneumatic, and avionics faults.Use specialized diagnostic tools and testing equipment.Repair aircraft systems while maintaining manufacturer specifications.Coordinate with engineering teams for complex technical issues.Perform functional tests after repairs to verify serviceability.Engine & Component MaintenanceInspect aircraft engines for wear, leaks, corrosion, and damage.Perform engine servicing, oil changes, filter replacement, and component inspections.Maintain propellers, Auxiliary Power Units (APU), and fuel systems.Monitor engine performance and recommend corrective actions.Avionics & Electrical SystemsInspect communication and navigation systems.Maintain radar, autopilot, cockpit instrumentation, and electrical wiring.Test aircraft electronic systems for operational reliability.Ensure compliance with avionics maintenance procedures.Documentation & ComplianceComplete maintenance logs, inspection reports, and defect records.Maintain aircraft technical documentation accurately.Ensure compliance with aviation regulatory authorities.Certify aircraft for return to service after maintenance (where appropriately licensed).Follow company maintenance policies and quality assurance procedures.Safety & Quality AssuranceFollow all aviation safety regulations and standard operating procedures.Maintain clean and organized work areas.Ensure proper use of Personal Protective Equipment (PPE).Report safety hazards and technical discrepancies immediately.Participate in safety audits and quality inspections.Team CoordinationWork closely with pilots, technicians, quality inspectors, and operations staff.Coordinate maintenance schedules with flight operations.Assist junior technicians with technical guidance and training.Participate in emergency aircraft recovery and AOG (Aircraft on Ground) support.Required QualificationsDiploma or Bachelor's Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Mechanical Engineering, or Aerospace Engineering.DGCA-approved AME qualification or equivalent aviation authority certification is preferred.Valid Aircraft Maintenance Engineer License (where applicable).Type rating on specific aircraft is an advantage.Relevant experience in aircraft maintenance is preferred.Required SkillsStrong knowledge of aircraft systems and maintenance procedures.Excellent troubleshooting and fault diagnosis skills.Knowledge of aviation regulations and airworthiness standards.Ability to interpret aircraft maintenance manuals and engineering drawings.Strong analytical and problem-solving abilities.Excellent attention to detail.Good communication and teamwork skills.Ability to work under pressure and meet strict deadlines.Computer proficiency in maintenance management software.Good technical documentation skills.Technical KnowledgeAircraft StructuresGas Turbine EnginesHydraulic SystemsPneumatic SystemsElectrical SystemsAvionics SystemsFlight Control SystemsLanding Gear SystemsFuel SystemsAircraft DocumentationMaintenance PlanningAircraft Safety StandardsPreferred CertificationsDGCA Aircraft Maintenance Engineer LicenseEASA Part-66 License (preferred internationally)ICAO-compliant aviation trainingHuman Factors TrainingSafety Management System (SMS) TrainingFuel Tank Safety TrainingEWIS (Electrical Wiring Interconnection System) TrainingAircraft Type Rating CertificationWorking ConditionsAirport hangars, maintenance bases, and line maintenance stations.Rotational shifts including nights, weekends, and public holidays.Outdoor work in varying weather conditions.Physically demanding work involving standing, climbing, bending, and lifting equipment.Exposure to aircraft noise, fuels, lubricants, and hydraulic fluids while following strict safety procedures.Salary Range (India)Fresher: 3.5 - 6 LPA2-5 Years: 6 - 10 LPA5-10 Years: 10 - 18 LPALicensed/Type-Rated AME: 15 - 30+ LPA (depending on airline, aircraft type, and experience)

An Aircraft Maintenance Engineer (AME) is responsible for inspecting, maintaining, repairing, troubleshooting, and certifying aircraft to ensure they are safe, airworthy, and compliant with aviation regulations. The role involves carrying out scheduled and unscheduled maintenance on aircraft systems, engines, avionics, electrical components, hydraulic systems, landing gear, and structural components while adhering to the standards established by aviation authorities.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine, preventive, scheduled, and unscheduled aircraft maintenance.Conduct daily, transit, weekly, A-check, B-check, C-check, and heavy maintenance inspections.Inspect aircraft structures, fuselage, wings, landing gear, flight controls, and engines.Diagnose and rectify aircraft defects using approved maintenance procedures.Replace, repair, and overhaul defective aircraft components.Ensure all maintenance tasks are completed according to the Aircraft Maintenance Manual (AMM).Troubleshooting & RepairsIdentify mechanical, hydraulic, electrical, pneumatic, and avionics faults.Use specialized diagnostic tools and testing equipment.Repair aircraft systems while maintaining manufacturer specifications.Coordinate with engineering teams for complex technical issues.Perform functional tests after repairs to verify serviceability.Engine & Component MaintenanceInspect aircraft engines for wear, leaks, corrosion, and damage.Perform engine servicing, oil changes, filter replacement, and component inspections.Maintain propellers, Auxiliary Power Units (APU), and fuel systems.Monitor engine performance and recommend corrective actions.Avionics & Electrical SystemsInspect communication and navigation systems.Maintain radar, autopilot, cockpit instrumentation, and electrical wiring.Test aircraft electronic systems for operational reliability.Ensure compliance with avionics maintenance procedures.Documentation & ComplianceComplete maintenance logs, inspection reports, and defect records.Maintain aircraft technical documentation accurately.Ensure compliance with aviation regulatory authorities.Certify aircraft for return to service after maintenance (where appropriately licensed).Follow company maintenance policies and quality assurance procedures.Safety & Quality AssuranceFollow all aviation safety regulations and standard operating procedures.Maintain clean and organized work areas.Ensure proper use of Personal Protective Equipment (PPE).Report safety hazards and technical discrepancies immediately.Participate in safety audits and quality inspections.Team CoordinationWork closely with pilots, technicians, quality inspectors, and operations staff.Coordinate maintenance schedules with flight operations.Assist junior technicians with technical guidance and training.Participate in emergency aircraft recovery and AOG (Aircraft on Ground) support.Required QualificationsDiploma or Bachelor's Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Mechanical Engineering, or Aerospace Engineering.DGCA-approved AME qualification or equivalent aviation authority certification is preferred.Valid Aircraft Maintenance Engineer License (where applicable).Type rating on specific aircraft is an advantage.Relevant experience in aircraft maintenance is preferred.Required SkillsStrong knowledge of aircraft systems and maintenance procedures.Excellent troubleshooting and fault diagnosis skills.Knowledge of aviation regulations and airworthiness standards.Ability to interpret aircraft maintenance manuals and engineering drawings.Strong analytical and problem-solving abilities.Excellent attention to detail.Good communication and teamwork skills.Ability to work under pressure and meet strict deadlines.Computer proficiency in maintenance management software.Good technical documentation skills.Technical KnowledgeAircraft StructuresGas Turbine EnginesHydraulic SystemsPneumatic SystemsElectrical SystemsAvionics SystemsFlight Control SystemsLanding Gear SystemsFuel SystemsAircraft DocumentationMaintenance PlanningAircraft Safety StandardsPreferred CertificationsDGCA Aircraft Maintenance Engineer LicenseEASA Part-66 License (preferred internationally)ICAO-compliant aviation trainingHuman Factors TrainingSafety Management System (SMS) TrainingFuel Tank Safety TrainingEWIS (Electrical Wiring Interconnection System) TrainingAircraft Type Rating CertificationWorking ConditionsAirport hangars, maintenance bases, and line maintenance stations.Rotational shifts including nights, weekends, and public holidays.Outdoor work in varying weather conditions.Physically demanding work involving standing, climbing, bending, and lifting equipment.Exposure to aircraft noise, fuels, lubricants, and hydraulic fluids while following strict safety procedures.Salary Range (India)Fresher: 3.5 - 6 LPA2-5 Years: 6 - 10 LPA5-10 Years: 10 - 18 LPALicensed/Type-Rated AME: 15 - 30+ LPA (depending on airline, aircraft type, and experience)

As an Accounts Executive, you will manage various accounting functions, ensuring accurate record-keeping and financial management for the organization in Peelamedu, Coimbatore.Key Responsibilities:You will individually handle accounts, manage cash transactions, and oversee bank payments. This includes performing bank reconciliations and ensuring adherence to tax regulations such as TDS and income tax. You will also be responsible for overseeing Tally entries and verifying ledger entries to maintain financial integrity.Required Skills:A graduate with 2 to 5 years of relevant experience in accounting is required. Proficiency in Tally or Tally Prime is essential for this role. You should possess strong attention to detail for accurate record-keeping and verification processes, as well as solid organizational skills to manage multiple tasks efficiently.Expectations:The role requires a male candidate capable of working full-time from the office. You should be detail-oriented and adaptable to a dynamic working environment. Effective communication skills and the ability to collaborate with team members will be vital to your success in this position.

We are looking for a Data Entry Operator to join our team for online data entry work from home. This position is ideal for freshers seeking a part-time job opportunity and requires only a 10th-grade education. Key Responsibilities:- Enter Data: Accurately input and update information into databases and spreadsheets while ensuring high levels of accuracy.- Review Data: Verify and validate information to maintain data integrity and correct any discrepancies found during the data entry process.- Organize Files: Keep electronic files systematically arranged and ensure easy retrieval of information when required.- Meet Deadlines: Complete assigned tasks within set timelines to support overall project goals.Required Skills and Expectations:Candidates must be detail-oriented and have a basic understanding of computer applications. Familiarity with data entry software and proficiency in typing are essential for this role. Strong organizational skills are necessary to manage various tasks effectively, and the ability to focus while working remotely is crucial. As a team member, a positive attitude and willingness to learn will be important for success in this position. Candidates should be able to follow instructions carefully and show initiative in completing tasks. This role offers valuable experience in data management for those beginning their careers.

We are looking for a detail-oriented Data Entry Project Associate to join our team. This is a part-time, work-from-home position suitable for freshers who have completed their 10th grade. Key Responsibilities:- Data Input: Accurately enter data into our systems, ensuring that all information is correct and well-organized.- Data Verification: Review and validate data entries for accuracy and completeness, making any necessary corrections.- Record Keeping: Maintain organized records of data entries and updates, ensuring easy access for team members.- Communication: Collaborate with team members to clarify any doubts regarding data requirements and processes.Required Skills and Expectations:Candidates should possess strong attention to detail and be able to work independently with minimal supervision. Good computer skills, including familiarity with Excel or other data entry software, are essential. Effective communication skills are important for clarifying data requirements and collaborating with team members. A commitment to meeting deadlines and delivering high-quality work is expected, along with the ability to manage your time effectively in a part-time work schedule. Freshers are encouraged to apply, and a willingness to learn and adapt is highly valued.

We are looking for a motivated Data Entry Coordinator to join our team in Madurai. This part-time position is ideal for freshers who have completed at least their 10th grade and are seeking an opportunity to gain experience in data management while working from home. The main responsibilities include accurately entering and updating data into our systems. You will ensure that all information is correct and organized for easy access. Maintaining the confidentiality of sensitive information is also essential in this role. To succeed, candidates must have good attention to detail and the ability to work independently. Basic computer skills are necessary, including familiarity with word processing and spreadsheet applications. A reliable internet connection is also required to perform data entry tasks effectively. We expect you to manage your time efficiently and meet deadlines consistently. Strong communication skills will help you collaborate with team members and supervisors when needed. If you are eager to learn and take pride in your work, we encourage you to apply for this opportunity to build your career in data entry.

Join our team as a Data Processing Engineer, where you will play a crucial role in managing and processing data to support various projects. This is a part-time work-from-home position ideal for freshers who have completed their 10th grade.nnKey Responsibilities:nn- Data Entry: Accurately input data into databases or systems, ensuring consistency and correctness.n- Data Cleaning: Review and edit data to remove any inaccuracies or duplicates, maintaining high data quality.n- Data Analysis: Assist in analyzing datasets to identify trends or insights that can contribute to decision-making.n- Reporting: Generate basic reports based on processed data, presenting findings in a clear and understandable format.nnRequired Skills and Expectations:nnCandidates should have a strong attention to detail to ensure precision in data handling. Basic computer skills are necessary, including familiarity with spreadsheet applications. Effective communication skills will help in presenting data clearly. We expect reliable individuals who can manage their time efficiently and meet deadlines while working from home. Adaptability and a willingness to learn will contribute to your success in this role. Freshers with a problem-solving attitude and a keen interest in data processing will thrive in this position.

As a Data Entry Executive, you will play a crucial role in managing and maintaining data with precision and accuracy. This position is suitable for freshers looking to start their careers in data management.Key Responsibilities:- Data Entry: Accurately input data into specified databases or systems, ensuring high levels of accuracy and attention to detail.- Data Verification: Regularly check and verify data for any discrepancies, ensuring the information is both correct and up to date.- Report Generation: Create basic reports based on the entered data, providing insights and summaries for further analysis.- Database Maintenance: Organize and maintain the dataset to ensure it remains accessible and usable, aiding in efficient data retrieval.- Confidentiality Compliance: Follow company guidelines to handle sensitive information with confidentiality and integrity.Required Skills and Expectations:- Attention to Detail: A strong focus on accuracy is essential to prevent errors in data entry and reporting. - Basic Computer Skills: Familiarity with computers, particularly word processing and spreadsheet software, is necessary for efficiently handling data.- Time Management: Ability to manage time effectively to meet deadlines while working independently from home.- Communication Skills: Clear and effective communication is important, especially in understanding instructions and reporting any issues.- Adaptability: Willingness to learn and adapt to new tools or processes as required by the role. This part-time work-from-home position is an excellent opportunity for those eager to begin their journey in data management.