Pressure Vessels Jobs

Key ResponsibilitiesThe duties of a Quality Engineer depend heavily on whether they are in Manufacturing (like at Voltkon or T&T Infra) or Software (Tech).A. System & Process DesignDeveloping Quality Standards: Establishing the benchmarks for what a perfect product looks like.Designing Test Protocols: Creating the step-by-step methods used to inspect raw materials, in-process goods, or software code.Risk Management: Identifying potential points of failure early (using tools like FMEA) and designing fail-safes.B. Auditing & ComplianceInternal Audits: Regularly checking if the team is following the ISO 9001 or IATF 16949 standards.Supplier Quality: Working with vendors to ensure the parts they send meet your company's high standards.C. Problem Solving & Continuous ImprovementRoot Cause Analysis (RCA): When something goes wrong, a QE doesn't just fix itthey find out why it happened using the 5 Whys or Fishbone Diagrams.CAPA (Corrective and Preventive Actions): Implementing permanent fixes so the same mistake never happens twice.Lean & Six Sigma: Using statistical data to reduce waste and improve the speed of production.

Designation :- Quality Engineer Qualification:- Diploma or Mechanical, Experience:- 5 Years To 7 Years Salary:-35,000/- To 40,000/-Gender:- MaleJob Time:- General ShiftJob Location:- Palghar, Maharashtra Industry:- Manufacturing Company

Openings for Sr. EngineerJD:1. Should have experience in Detail Engineering & Drafting of power plant equipment like boilers, pressure vessels, tanks, structure and piping.2. Good Communication skill3. Team handling ability4. Good Attitude5. Salary Negotiable6. Location Trichy7. Experience 4.5 to 6 years8. Qualification DME/BE9. Position Sr. Engineer10. No. of Position - 2Interested candidates can forward their resumes to:Email: marketing@equipowerengineering.comContact: 9043919470

TIG & MIG welding experience and also machine assembly line fitter

pharma equipments, process equipments, estimation engineer, pharma lab equipments

- Conduct third-party inspections at vendor sites, construction sites, and manufacturing facilities- Verify compliance with industry standards, codes, and regulations- Identify and report defects, deviations, and non-conformities- Collaborate with vendors, contractors, and internal stakeholders- Develop and implement inspection plans, procedures, and checklists

Job Description:Sales Development Engineer is a key point of contact for our customers and provide both sales advice & supplies for critical pressure-components. As a Sales Development Engineer, you will be responsible for end-to-end sales cycle & business development through customer acquisition and building long term relationships with customers which ensures higher recall value. You should be having knowledge of customers & product starting from Spiral-Wound Gaskets enhancing further to flanges & pipe-fittings in India & neighboring countries.Responsibilities: Will need to develop the Spiral Wound Gaskets (SPW) portfolio and assist the Specialist in volumes. Also actively look at the markets on daily basis and build a competent system to monitor competition . They would also need to work on and resolve quality related issues in the business and will involve regular domestic travels initially. Actively looking to develop new business inside and outside the domains. Coordinating with clients for their periodic requirements in assigned commodity. Achieve healthy revenues without compromising on clients profitability. Advising clients with requisite information regarding the market condition. Activating inactive clients through regular follow up. Regularly following-up with clients and handling their queries. Achieving the Business target assigned in terms of, generating revenue, acquiring clients, enhancing & upgrading the client relationship. Ensuring the highest level of service to the clients.

The Production Supervisor role requires practical knowledge of manufacturing process (welding, cold forming, machining, pressing), job assignment, planning and supervising to fabricate bellows, hoses, fittings, pressure vessels.This job is in Mechanical Engineering Domain with focus in Fabrication (Structural and Pressure part)The Engineer needs to be strong in reading engineering drawings to plan the sequence of manufacturing operationsThe Production supervisor needs to provide written instructions to workers for individual operations and monitor the job progress with respect to planned deliveryThe Production representative needs to record the work order progress and create production plans for customers when requestedThe Engineer needs to be able to generate cutting plans for steel sheets, plates, coils

1. OPS Preperation2. Incoming Material3. WIP Inspection 4. MIG Welding Knowledge process and inspection 5. Quality Procedure and documentation 6. Expert in Ms-office7. Inspection in Paint Shop

To prepare the technical drawings promptly as per customer requirements with a concept of practical production easiness. To reduce production difficulties & timely/precise assistance to production teamJob Responsibilities / Accountability (major end results the job is expected to achieve):Drawing To take the print outs of customer drawings received from customers & put Email date stamp on it and Hand it over to design dept for designing. To save the customer drawing files in server and keep the Proper track of the same To prepare fabrication drawings from the drawings or sketch received from the customers. To get the total design data and required information from design dept. To make follow-up for drawing approval. To make necessary changes in drawing as per customer comments and resubmit revised drawing for approval. To send the fabrication drawings to the customer for approval To issue the approved fabrication drawing in workshop Giving Templates, Semi-ellipsoidal Dish pointsProduction Assistance To coordinate with production engineers and solve the queries and doubts for easy flow of manufacturing To make the purchase requisition for bought out items required for the job. To make sketches for the bought out items and submit it to purchase department along with requisition To prepare As BUILT drawings as per report received From the inspection engineers Update Documents such as Order Status, on time drawing, drawing approval status & Bar charts. Making drawing list for big jobs.Reporting Daily updated Drawing status report Requisition status report ISO Documentation of drawing depts.Job Specification: Qualifications (Basic, Professional & any other desired qualification):- Diploma in AutoCAD Work Experience (No. of years, Industry & Areas in which person would had worked):- Preferred 5 years of experience in relevant area of work Functional Skills:- Drafting skills - Basic communication

TA & shutdown management for static equipment in oil & gas facility.

Sr. mechanical EngineersBachelor or Diploma degree with a specialization in the mechanical all type of fabrication work and can present a working experience of at least 5 years. Good communication and interpersonal skills.Knowledge and experience in the oil and gas industry are an advantage. Job Responsibilities and Duties: Analyze root causes for all fabrication issues and resolve same and implement new process tools according to required order. Coordinate with technicians and provide support to various teams and maintain the quality of the work processes in systems. Manage all communication with supervisors and ensure the efficiency of the fabrication process and resolve issues for processes. Design various ideas for pressure vessels, heat exchangers etc and prepare detailed drawings for all fabrication processes. Prepare estimates and quotes for supply materials and assist to fabricate and weld the products. Plan materials for new products and ensure optimal utilization of the resources and administer product orders and ensure compliance with the timeframe for the various fabricated products. Coordinate with the engineering team and prepare products. Assist the production manager and prepare reports on a regular basis after final inspections. Manage and reconcile work orders with help of vendors and prepare required drawings and evaluate welding joints. Maintain quality for fabrication from conceptualization to implementation and perform an inspection for welding, painting and sandblast. Collaborate with the work team and assist in the delivery of projects. Review of WPS & PQR & Welder Qualification prior to welding. Verification of Raw Materials plates, pipes, fittings, structural sections and review of Test Certificates. Structural Fabrication NDT Level II in RT, UT, PT, MT.

worked in: pressure vessels / Heat exchangers/ Boilers.We are looking for an experienced Production Manager to organize and oversee the manufacturing of goods. You will be ultimately responsible for the smooth running of all production lines and the quality of output.We expect you to have deep know-how in production procedures. Ability to direct personnel towards maximum performance will set you apart as a leader. Decision-making and problem-solving will take up a great part of your day. If you are up to it, wed like to talk to you.

Dear Candidate,Job Title: Autocad DesignerCompany - Mectech GroupLocation - Phase 2 Udyog Vihar , GurugramExperienc : - 5 - 7 year in Fabrication, Pressure vessel, Heat exchanger .Responsibilities include:-reparing Shop Drawings, Detail Drawings & as Built Drawings for Heat ExchangersPreparation of Fabrication drawings for Pressure vesselsPreparation of piping and instrumentation drawingDeliver the drawings within the given dead lineMaking GA drawings and Fabrication drawingsTo generate Bill of Material for ManufacturingControl of documents and maintain distribution listGathering and understanding the client requirementDesired Candidate ProfileCandidate with experience Pressure Vessel design, Heat Exchangers design shall be preferredHe should be able to generate assembly drawing, manufacturing drawings, part drawings etcShould be proficient with AutoCADPlease fill in the details below.Current Ctc:-Expected Ctc:-Experience:-Notice period :-Current Location:-Home Town:-Current Company:-Previous Company:-Phone Number :-Email Id:-Reason for change :-

- Studying & understanding the technical documents.- Studying drawing and preparing estimation.- Coordinating with client for technical requirements.- Getting estimation approval- Preparing and sending offers to clients

Position : Design and estimation EngineerLocation : Rabale Navi MumbaiExp : 4 years of experience in pressure vessel industry.Salary Budget : 4 - 5 LPAQualification Required : Chemical / Mech Engineering backgroundDesired Candidates :Candidate should be in Design, Drawings & Proposal.Min 4 years experience in pressure vessel industry.Qualification required- Mechanical Engineer.Expertise in mechanical design, drawings and estimation of pressure vessels with experience of independent handling of at least 3 years. Some production experience will be of added advantage.

worked in: pressure vessels / Heat exchangers/ Boilers.We are looking for an experienced Production Manager to organize and oversee the manufacturing of goods. You will be ultimately responsible for the smooth running of all production lines and the quality of output.We expect you to have deep know-how in production procedures. Ability to direct personnel towards maximum performance will set you apart as a leader. Decision-making and problem-solving will take up a great part of your day. If you are up to it, wed like to talk to you.

To prepare the technical drawings promptly as per customer requirements with a concept of practical production easiness. To reduce production difficulties & timely/precise assistance to production teamJob Responsibilities / Accountability (major end results the job is expected to achieve):Drawing To take the print outs of customer drawings received from customers & put Email date stamp on it and Hand it over to design dept for designing. To save the customer drawing files in server and keep the Proper track of the same To prepare fabrication drawings from the drawings or sketch received from the customers. To get the total design data and required information from design dept. To make follow-up for drawing approval. To make necessary changes in drawing as per customer comments and resubmit revised drawing for approval. To send the fabrication drawings to the customer for approval To issue the approved fabrication drawing in workshop Giving Templates, Semi-ellipsoidal Dish pointsProduction Assistance To coordinate with production engineers and solve the queries and doubts for easy flow of manufacturing To make the purchase requisition for bought out items required for the job. To make sketches for the bought out items and submit it to purchase department along with requisition To prepare As BUILT drawings as per report received From the inspection engineers Update Documents such as Order Status, on time drawing, drawing approval status & Bar charts. Making drawing list for big jobs.Reporting Daily updated Drawing status report Requisition status report ISO Documentation of drawing depts.Job Specification: Qualifications (Basic, Professional & any other desired qualification):- Diploma in AutoCAD Work Experience (No. of years, Industry & Areas in which person would had worked):- Preferred 5 years of experience in relevant area of work Functional Skills:- Drafting skills - Basic communication

1. Study of process parameters thoroughly2. Design of the equipment as per standards (ASME, TEMA)3. Cost price estimation of the equipment as per design planned4. Meeting with the client and understanding and clearing their technical requirements5. Preparation of technical offer as per standards6. Preparation of Bill of Materials and Bill of Quantity as per design7. Co ordination with purchase for the costing of materials (Raw material, Consumables, Flanges, Labor)7. Co ordination with purchase for the costing of materials (Raw material, Consumables, Flanges, Labor)9. Standardize the estimation sheet for the fellow subordinates so that the costing stays inline with the design parameters

- Conduct quality checks: The quality engineer will be responsible for performing thorough quality checks on products to ensure they meet the required standards before being released to customers.- Document quality control processes: They must accurately document all quality control processes, findings, and results to maintain a record of inspections and to track any issues that arise.- Perform line inspections: The quality engineer will conduct regular line inspections to monitor the production process and identify any areas for improvement or potential issues.- Ensure final product quality: They will be responsible for overseeing the final quality of products before they are shipped out, ensuring they meet customer expectations and company standards.- Experience in injection molding: Candidates must have experience working with injection molding processes and be familiar with the related quality control procedures.- Drive continuous improvement: The quality engineer should actively participate in driving continuous improvement initiatives to enhance product quality and efficiency in the manufacturing process.- Knowledge of pressure vessels: Familiarity with pressure vessels and the associated quality control measures is essential for this role.- Conduct NDT inspections: The quality engineer should be able to perform non-destructive testing inspections to identify any defects or flaws in materials or products. - Strong attention to detail: The ideal candidate should have a keen eye for detail and be able to spot any defects or inconsistencies in products.- Problem-solving skills: They should have strong problem-solving skills to effectively identify issues, root causes, and implement solutions to improve product quality.

Job Summary:The Quality Engineer will be responsible for developing, implementing, and maintaining quality assurance processes and systems to ensure that our products/services meet established standards, customer requirements, and regulatory compliance. This role involves working closely with various departments, analyzing quality data, and driving continuous improvement initiatives to enhance product reliability and operational efficiency.Responsibilities:Quality System Management: Develop, implement, and maintain the company's Quality Management System (QMS), ensuring compliance with industry standards (e.g., ISO 9001, IATF 16949, AS9100) and regulatory requirements relevant to India.Process Improvement: Identify areas for quality improvement within manufacturing or service processes. Implement robust corrective and preventive actions (CAPA) to address non-conformances and reduce defects.Quality Planning: Participate in the planning phase of new products or processes, including defining quality standards, inspection methods, and control plans.Inspection and Testing: Establish and oversee inspection and testing procedures for incoming materials, in-process production, and finished goods to ensure adherence to specifications.Root Cause Analysis: Conduct thorough root cause analysis for quality issues, customer complaints, and internal deviations using problem-solving tools (e.g., 8D, 5 Whys, Fishbone Diagram).Supplier Quality Management: Collaborate with suppliers to ensure the quality of incoming materials and components. Conduct supplier audits and manage supplier performance as required.Documentation and Reporting: Create and maintain quality documentation, including control plans, FMEAs (Failure Mode and Effects Analysis), PPAP (Production Part Approval Process) documents, inspection reports, and quality metrics. Prepare regular reports on quality performance.Audit Management: Participate in internal and external quality audits, ensuring audit readiness and addressing audit findings effectively.Training: Provide training to production and quality control personnel on quality standards, inspection techniques, and relevant quality tools.Statistical Process Control (SPC): Utilize statistical methods and tools (e.g., SPC, MSA - Measurement System Analysis) to monitor and control process variations and ensure consistent quality.Customer Communication: Address customer quality concerns and collaborate with customer service/sales to provide timely and effective resolutions.Continuous Improvement: Drive and support lean manufacturing, Six Sigma, or other continuous improvement initiatives within the organization.