Plumber Jobs

Handle basic electrical, plumbing, and MEP installation and maintenance work.Perform wiring, pipe fitting, fixtures, leakage rectification, and troubleshooting.Support MEP works at construction, industrial, and project sites.Follow site instructions and safety procedures.Coordinate with supervisors and complete assigned work on time.Travel to different project locations as required.

Qualification: Diploma / B.E. / B.Tech in Mechanical or Electrical EngineeringIndustry: Real Estate / ConstructionJob Summary:We are looking for an experienced MEPF Engineer to supervise and coordinate Mechanical, Electrical, Plumbing & Firefighting works at project sites. The role involves site execution, contractor/consultant coordination, drawing & BOQ review, quality inspection, testing & commissioning, and ensuring timely completion of MEPF works.Key Responsibilities:Supervise MEPF site execution and installationsReview drawings, BOQs and technical specificationsCoordinate with contractors, consultants, architects and site teamsMonitor HVAC, electrical, plumbing and firefighting worksConduct site inspections and resolve technical issuesCheck material quality and contractor workAssist in quantity estimation and bill verificationPrepare DPRs and maintain project documentationEnsure safety, quality and project timelinesRequirements: 2-8 years of relevant MEPF site-execution experience Real estate/construction project experience Knowledge of HVAC, Electrical, Plumbing & Firefighting AutoCAD & MS Excel knowledge Good site coordination and communication skills

1. Basic light fitting faults rectification and replacement.2. Switch and socket fault rectification.3. Urinal Sensor fault attending, WC flush attending, drain line cleaning.4. Glass and wooden door speed adjustment and alignment.5. Able to identify and address the issue on the floor spring and door closure.6. Able to address the AC damper supply and return air grill issue.7. Stock level maintenance.

We are looking for a skilled Plumber to join our team in Oman. The ideal candidate should have 1 to 5 years of plumbing experience and have completed at least the 10th grade. This position is office-based, and candidates must be male.Key Responsibilities:- Install plumbing systems: Responsible for installing pipes, fixtures, and other plumbing equipment to ensure safe and efficient water flow.- Repair and maintain systems: Conduct regular maintenance and repair work on plumbing systems to prevent leaks and ensure proper functioning.- Diagnose issues: Identify problems in plumbing systems, using appropriate tools to troubleshoot and suggest effective solutions.- Ensure compliance: Follow all safety and building codes when performing plumbing work to ensure the integrity of installations and repairs.- Coordinate with team members: Work closely with other tradespeople and team members to ensure smooth project execution and timely completion of tasks.Required Skills and Expectations:The ideal candidate should have a good understanding of plumbing systems and tools. Strong problem-solving skills are necessary to quickly diagnose and resolve issues. The ability to work well in a team and communicate effectively is important for coordinating with colleagues. Candidates should also be detail-oriented, ensuring all work is performed accurately and according to safety guidelines. A proactive attitude and willingness to learn new techniques will help in professional growth in this role.

As a Field Maintenance Engineer, you will play a crucial role in ensuring the smooth operation of equipment and systems in various locations. Your primary responsibilities will include:- Conducting Routine Maintenance: You will perform regular maintenance checks on machinery and equipment to prevent malfunctions and ensure optimal performance. - Troubleshooting Issues: When problems arise, you will identify and analyze the root cause of the issues to find effective solutions quickly.- Repairing Equipment: You will be responsible for repairing faulty equipment, which may involve replacing parts, fixing electrical systems, or recalibrating machinery.- Documenting Work: It's essential to keep detailed records of repairs, maintenance schedules, and any parts used, as this helps in future troubleshooting and planning.- Customer Interaction: You will communicate with clients to understand their needs and provide technical support, ensuring they are satisfied with the service provided.- Staying Updated on Technology: You will keep yourself informed about the latest tools and technologies in the field to improve efficiency and service quality.To excel in this role, you should have a solid background in mechanical or electrical systems. Good problem-solving skills are crucial, along with the ability to work independently and as part of a team. Effective communication is essential for interacting with clients and team members. A strong attention to detail will ensure that tasks are completed accurately and safely.

We are seeking a motivated Civil Engineer to join our team in Ghana. This position is ideal for both recent graduates and those with up to six years of experience. The Civil Engineer will play a crucial role in the planning, design, and execution of various construction projects.Key Responsibilities:- Design Civil Structures: Create detailed plans and drawings for buildings, bridges, and roads to ensure they are stable and safe.- Project Management: Oversee projects from start to finish, ensuring they are completed on time and within budget while maintaining quality standards.- Site Inspection: Conduct regular site visits to monitor construction progress, ensuring all safety and engineering standards are met.- Collaboration: Work closely with architects, contractors, and other engineers to ensure all aspects of the project are aligned for successful completion.- Problem Solving: Address any issues that arise during construction, finding effective solutions to keep the project on track.- Reporting: Prepare reports and documentation to communicate project status to stakeholders and ensure compliance with regulations.Required Skills and Expectations:- A degree in Civil Engineering or a related field is required. Candidates with relevant internships or field experience will be considered an advantage.- Strong analytical skills to understand complex engineering concepts and apply them in practical scenarios.- Good communication skills are necessary for effective collaboration with team members and stakeholders.- Proficiency in engineering software such as AutoCAD and Civil 3D is essential.- A proactive attitude, with the ability to work both independently and as part of a team.- Willingness to learn and adapt to new challenges in a fast-paced environment.

We are looking for a Multi Skill Technician with 1 to 3 years of experience who is eager to work from home in Janla, Bhubaneswar. This role requires hands-on skills in various technical fields and the ability to solve problems effectively.Key Responsibilities:1. **Maintenance and Repair**: You will be responsible for troubleshooting and fixing mechanical and electrical issues in equipment and machinery, ensuring they operate smoothly.2. **Installation**: You will assist in installing new equipment, ensuring proper setup, alignment, and functioning according to specifications.3. **Regular Inspections**: You will perform routine inspections on machinery and equipment to identify any potential issues before they become serious problems.4. **Documentation**: You will maintain accurate records of repairs, maintenance schedules, and any modifications made to equipment to ensure compliance with standards.5. **Collaboration**: You will work closely with other team members to ensure effective communication and coordination for project completion.Required Skills and Expectations:Candidates should be skilled in both electrical and mechanical aspects of machinery. A strong understanding of tools and equipment is essential. You should be detail-oriented, have good problem-solving skills, and be able to work independently. Excellent communication skills and the ability to prioritize tasks are also important for this role. A background with an I.T.I. certification is required, along with a passion for technical work and a proactive attitude towards learning and development.

Job description:Job Description - Plumbing Draftsman / Plumbing DrafterPosition: Plumbing Draftsman / Plumbing DrafterDepartment: MEP DesignIndustry: MEP Consulting / EngineeringLocation: BengaluruOpenings: 2Job SummaryWe are looking for skilled Plumbing Draftsmen/Drafters to join our MEP design team. The candidates will be responsible for preparing accurate plumbing drawings, layouts, and documentation for building projects while coordinating with other MEP disciplines and ensuring drawings comply with project requirements and applicable standards.Key ResponsibilitiesPrepare detailed 2D plumbing drawings and layouts using AutoCAD.Develop plumbing layouts for water supply, drainage, soil and waste systems.Prepare sanitary, storm-water and rainwater drainage layouts.Prepare pipe routing, shaft layouts, riser diagrams, and schematic drawings.Develop detailed drawings for plumbing fixtures and equipment.Prepare plumbing drawings based on architectural and engineering requirements.Coordinate plumbing layouts with HVAC, Electrical, Fire Fighting, and Architectural drawings.Identify and resolve clashes and coordination issues before finalizing drawings.Revise drawings based on comments from engineers, clients, and project teams.Prepare detailed sections, elevations, and enlarged layouts wherever required.Maintain proper drawing standards, layers, dimensions, annotations, and drawing revisions.Assist engineers in preparing BOQ, quantity take-offs, and material schedules when required.Ensure drawings are issued within project timelines and maintain proper document control.Coordinate with the site team and incorporate site requirements or approved changes into drawings.Required SkillsStrong knowledge of AutoCAD and plumbing drafting.Good understanding of building plumbing systems.Knowledge of water supply and drainage systems.Ability to read and understand architectural and MEP drawings.Good knowledge of pipe sizes, fittings, plumbing fixtures, and routing.Understanding of plumbing shafts, risers, and service coordination.Knowledge of Revit MEP/BIM will be an added advantage.Good attention to detail and accuracy.Ability to work independently as well as coordinate with the MEP design team.Candidate ProfilePosition 1 - Junior Plumbing DrafterExperience: 1 year of relevant experience.Gender-FemaleFreshers with strong AutoCAD knowledge may also be considered.Good knowledge of basic plumbing drafting and AutoCAD.Should be willing to learn and work closely with senior engineers/drafters.Position 2 - Senior Plumbing DrafterExperience: Approximately 10 years of relevant experience. Gender- MaleStrong experience in building plumbing drafting and MEP coordination.Should be capable of independently handling plumbing drawings for projects.Should have good knowledge of AutoCAD and preferably Revit MEP.Experience coordinating with architects, engineers, and site teams will be preferred.EducationDiploma / ITI / Bachelor's degree in Civil, Mechanical, Plumbing, or a related engineering field is preferred.Key QualitiesStrong technical understanding.Good communication and coordination skills.Ability to meet deadlines.Attention to detail.Problem-solving ability.Team-oriented and professional approach.Note: Candidates should have practical experience in building plumbing drafting and MEP coordination. Experience in large-scale commercial, residential, hospitality, or industrial projects will be an advantage.

As a Pump Technician, you will perform important tasks related to the maintenance and servicing of pumps. Your role is crucial to ensure the smooth operation of pumping systems. Here are your key responsibilities:- Installation of Pumps: You will install various types of pumps at designated locations, ensuring correct alignment and connection to power sources.- Maintenance and Repair: You will carry out regular maintenance checks and troubleshoot issues with pumps to keep them functioning optimally. This includes identifying mechanical problems and replacing worn-out parts.- Testing and Calibration: You will test newly installed pumps and existing systems to ensure they operate at the required specifications and make necessary adjustments.- Documentation: You will maintain records of maintenance services, repairs, and installation activities to monitor the pump performance over time.- Customer Support: You will assist customers by answering questions and providing guidance about pump operation and maintenance requirements.To be successful in this role, you should have:- A basic understanding of mechanical systems related to pumps and their operation.- Strong problem-solving skills to diagnose and fix issues quickly and effectively.- Good communication skills to interact with team members and customers professionally.- Attention to detail to ensure all work is completed to high standards.- A willingness to learn and adapt to new technologies and techniques in pump maintenance.Working in this position requires you to be physically fit and capable of lifting equipment as needed. Time management skills are essential to ensure that all tasks are completed efficiently.

We are looking for a motivated ITI Fitter to join our team. This role is based at Boral Main Road and is suitable for candidates with 0 to 1 year of experience. The ideal candidate should have completed their 10th grade and possess an ITI certification.Key Responsibilities:- Assembly and Maintenance: You will be responsible for assembling and maintaining mechanical systems and components. This involves understanding technical drawings and making sure everything fits together correctly.- Machine Operation: You will operate various machines used for fitting parts and components. Understanding how these machines work is crucial for proper operation and safety.- Troubleshooting: You will diagnose and fix issues with machinery or systems. This requires critical thinking and the ability to quickly determine the cause of a problem.- Quality Control: You will check your work to ensure that it meets the required standards. This includes inspecting completed fittings for accuracy and functionality.- Safety Compliance: You will adhere to all safety regulations and guidelines in the workplace. Following safety protocols is essential to ensure a safe working environment.Required Skills and Expectations:- You should have a foundational knowledge of mechanical systems and fitting techniques.- Strong attention to detail is necessary to ensure precise work.- Basic problem-solving skills will help in troubleshooting mechanical issues.- Ability to work in a team and communicate effectively with other staff members.- A commitment to safety procedures and a willingness to learn new techniques are essential for success in this role.

Position: Facility Executive - TechnicalDepartment: Facility Management / OperationsReports To: Facility Manager / Assistant Facility ManagerLocation: Client SiteEmployment Type: Full-Time / Shift-BasedJob PurposeTo ensure the smooth, safe and efficient operation and maintenance of all technical and engineering systems at the facility, while maintaining service quality, statutory compliance and client satisfaction.Key ResponsibilitiesSupervise day-to-day operation and maintenance of electrical, mechanical, HVAC, plumbing and other MEP systems.Monitor DG sets, HT/LT panels, transformers, UPS, batteries, pumps, motors, AHUs, FCUs, chillers and HVAC systems.Conduct regular inspection of equipment and identify faults or potential breakdowns.Ensure preventive and corrective maintenance is carried out as per schedule.Attend breakdowns and coordinate with technicians/vendors for timely rectification.Monitor energy consumption and identify opportunities for cost and energy savings.Maintain equipment logbooks, maintenance records, checklists and daily reports.Ensure availability of spares, consumables and maintenance tools.Supervise technicians and allocate daily work responsibilities.Coordinate with external AMC vendors and service agencies.Ensure compliance with electrical, fire & life-safety and other statutory requirements applicable to the facility.Support facility inspections, audits and emergency drills.Follow all EHS and safety procedures and ensure safe working practices by the technical team.Handle client complaints and ensure timely closure of technical service issues.Prepare daily/weekly/monthly technical reports for the Facility Manager.Required SkillsGood knowledge of MEP and building services.Electrical and mechanical troubleshooting skills.Knowledge of HVAC, DG, UPS, pumps and electrical distribution systems.Team supervision and vendor coordination.Basic computer/MS Excel and reporting skills.Good communication and client-handling ability.Ability to work in rotational shifts, where required.Qualification & ExperienceQualification: ITI / Diploma / B.Tech in Electrical, Mechanical or related technical discipline.Experience: 2-5 years in Facility Management, Building Maintenance, Commercial Complex, Mall, Hospital, Hotel, Factory or similar environment.Key Performance Indicators (KPIs)Equipment uptime and breakdown response timePreventive maintenance completion %Breakdown closure timeEnergy consumption and savingsSafety complianceClient complaint resolutionDocumentation and reporting accuracyTechnician productivityVendor/AMC performanceIdeal candidate: A technically hands-on professional who can manage technicians, troubleshoot equipment, coordinate vendors and keep the entire facility running without disruption.

We are looking for a skilled Electrician to join our team in Nungambakkam, Chennai. The ideal candidate should have 1 to 4 years of experience and a passion for electrical work.Key responsibilities include:1. Installation: You will install electrical systems and components as per the required specifications, ensuring that all work meets safety standards.2. Maintenance: You will perform regular maintenance on electrical systems, diagnosing and repairing any issues that arise to ensure they function efficiently.3. Troubleshooting: You will identify electrical problems using specialized tools and equipment. This includes reading blueprints and technical diagrams to determine the best course of action.4. Collaboration: You will work closely with other team members to complete projects and ensure a safe working environment, sharing knowledge and skills as needed.Required skills include:- A solid understanding of electrical safety and building codes is essential.- Excellent problem-solving skills to address various electrical issues effectively.- Strong attention to detail is important to ensure quality work and compliance with safety regulations.- Good communication skills are needed to explain issues and solutions clearly to team members and stakeholders.Expectations include being able to work full-time from the office, displaying a proactive attitude towards learning new techniques or technologies, and contributing positively to team dynamics. Male candidates are preferred for this position.Notes: Willing to visit the Sites around Chennai