PLC SCADA Jobs

As a PLC Programmer for Nashik candidates, you will play a key role in programming PLCs, developing HMIs, and working with SCADA systems. This position is suited for individuals with a background in Electrical, Electronics, or Instrumentation Engineering. Fresh graduates, as well as those with 2-3 years of experience, are encouraged to apply.Key responsibilities include:- PLC Programming: Write and modify PLC code to ensure the efficient operation of automated systems.- HMI Development: Create user interfaces for the monitoring and control of processes, ensuring they are user-friendly and efficient.- SCADA Systems: Work with SCADA applications to enhance process monitoring and automation functionalities.Required skills and expectations for this role include:- A graduate degree in Engineering, specifically in Electrical, Electronics, or Instrumentation.- Proficiency in PLC programming and knowledge of HMI and SCADA systems.- Familiarity with Special Purpose Machines (SPM) and the ability to read electrical schematics.- Strong problem-solving skills and the ability to work collaboratively in a team environment.This is a full-time role based in Nashik, and candidates are expected to work from the office. Only male candidates are eligible for this position. The work schedule will adhere to standard office hours, with weekends typically off. Applicants must be prepared to engage in on-site project work as required.

Job Position: Executive Instrumentation Department: EngineeringUnit/Office Address: Plot No: 498,500,545,577/B, 585, 586, 587, 588, 589,Village: Dudhwada, Tal: Padra, Dist: Vadodara, Gujarat, India - 391450.Required Industry Type: Dyes/Chemical/Eng. No. of Vacancies: 2Education: BE Instrumentation Experience: 4 to 7 yearsEmployment Type: Permanent Gender: MaleShift Timings: Rotation ShiftJob Profile:a) Summary: Required Instrumentation Engineer (BE Instrumentation & Control or above) with experience of 4 to 7 Years. b) Job Responsibilities: Manage on site installations, maintenance of field instruments and suggest improvement actions after RCA. Shall have on hand experience on maintenance of DCS/ PLC systems. Shall be able to manage modifications, project executions. To ensure compliance to legal requirements. To ensure IMS system maintained as per ISO 9001 and OHSAS18001.c) Required Skills/Certifications: NAd) Other Requirements: Shall have worked in chemical/fertilizer/petrochemical/dyes company in maintenance department. Shall be able to lead a team of Technicians and manage shift Shall be capable to complete jobs in required time and cost with quality.e) Employee Benefits: PF, Gratuity, Bonus, Free Transportation, Free Canteen, Mediclaim (For full Family), Referral Benefits and Monthly Performance Incentive.

Hiring: PLC Automation EngineerLocation: BangaloreExperience: 8-12 YearsIndustry: Industrial Automation / ManufacturingWe are looking for an experienced PLC Automation Engineer to design, develop, commission, and troubleshoot industrial automation systems for manufacturing and production environments.Key Responsibilities:Develop and program PLC-based automation systems.Configure and troubleshoot PLCs, HMIs, and SCADA systems.Integrate sensors, drives, servo systems, and industrial control equipment.Conduct system testing, commissioning, and on-site troubleshooting.Analyze automation faults and implement corrective actions.Coordinate with electrical, mechanical, and production teams.Prepare control logic, technical documentation, and commissioning reports.Key Skills: PLC Programming, Siemens PLC, Allen-Bradley, HMI, SCADA, Industrial Automation, VFD, Servo Drives, Control Systems, Electrical Troubleshooting, System Commissioning

We are looking for a skilled PLC Programmer to join our team in Ludhiana. The ideal candidate should have 2 to 4 years of experience in programming PLC systems and hold a diploma. This role is based in the office and is open to male applicants.nnKey Responsibilities:nn- PLC Programming: Develop and modify PLC programs to ensure efficient and effective automation processes in manufacturing.n n- Troubleshooting: Identify and resolve issues in PLC systems to minimize downtime and maintain high operational efficiency.nn- Testing and Validation: Conduct tests on PLC systems to verify functionality and performance, ensuring they meet project specifications.nn- Documentation: Create and maintain clear documentation of programming, troubleshooting steps, and system changes for future reference.nn- Collaboration: Work closely with engineers and technicians to implement control strategies that enhance production capabilities.nnRequired Skills and Expectations:nnCandidates must have a strong understanding of PLC programming languages and automation technologies. Experience with troubleshooting and system optimization is essential. The ability to analyze technical problems and find practical solutions is crucial. Strong communication skills are required to collaborate effectively within a team. Candidates should be detail-oriented and committed to maintaining high-quality standards in their work. A proactive attitude towards continuous learning and improvement is also expected. Overall, the successful candidate will demonstrate technical expertise and a strong commitment to operational excellence.

Key ResponsibilitiesDesign, develop, and implement electrical systems, circuits, and control panels.Prepare electrical schematics, wiring diagrams, layouts, and technical documentation.Perform electrical calculations, load analysis, and system sizing.Conduct testing, commissioning, troubleshooting, and maintenance of electrical equipment.Coordinate with mechanical, production, quality, and project teams to ensure successful project completion.Ensure compliance with electrical codes, safety regulations, and industry standards.Assist in vendor evaluation, equipment selection, and technical procurement activities.Analyze and resolve electrical faults and system performance issues.Monitor project progress and provide technical support throughout the project lifecycle.Prepare project reports, maintenance records, and engineering documentation.

We are looking for a skilled PLC Programmer to join our team in Hyderabad. This full-time position is ideal for candidates with 2 to 4 years of experience in programming PLC systems, who are eager to work in a dynamic environment. Key Responsibilities:- PLC Programming: Develop and implement PLC programs to control machinery and processes effectively. This includes writing, testing, and optimizing code for various applications.- System Troubleshooting: Diagnose and resolve issues related to PLC systems and instrumentation. You will utilize your problem-solving skills to ensure minimal downtime in operations.- Collaboration: Work closely with engineers and other team members to integrate PLC systems with existing processes. Good communication skills will be vital for ensuring successful collaboration.- Documentation: Maintain clear documentation of programs and processes. This includes creating user manuals and technical documentation for future reference.Required Skills and Expectations:Candidates must hold a graduate degree and have relevant experience in PLC programming. A sound understanding of control systems, automation, and electrical engineering principles is essential. Strong analytical and problem-solving abilities are necessary, along with attention to detail. As this role is based in an office setting, the ideal candidate should be comfortable working in a team and have effective communication skills. We encourage male applicants who are ready to contribute to our projects and thrive in a challenging environment.

We are actively hiring for our Application Development team an experienced Industrial Automation Engineers. Looking for passionate professionals with strong expertise in PLC, SCADA, DCS systems, and automation programming. Immediate Joiners Preferred.Strong programming skills in C#, C++, C, Python, ReactGood understanding of Data StructuresHands-on experience in PLC, SCADA & DCS systemsExposure to platforms like:HoneywellSiemensAllen BradleyDeltaVYokogawaIEC 61131 Programming:Ladder LogicFunction Block Diagram (FBD)Structured TextReverse engineering of PLC/DCS logic behaviorsUnderstanding of Client-Server Architecture & DCOMStrong troubleshooting and customer interaction skillsGood to have:Commissioning experienceIntel Fortran knowledge

Job Description:We are seeking a electrical automation engineer for our product development department, the ideal candidate should have hands on experience in designing and developing electrical systems like component selection, control panel, testing and product validation that form the foundation of physical automation machinery.Key Responsibilities:Design and develop electrical systems, wiring diagrams and control schematics for the product.Knowledge of electrical components such as contractors,relays,mcbs,sensors, Plc,HMI systems.Knowledge of load calculations and size of cable, single line drawing on AutoCAD.Hands of experience on beckhoff software for PLC programming.Hands of experience on software programming, testing, integration and troubleshooting process also.Candidates from product based company or Automation company are eligible.Btech - Electrical candidates, Immediate joiners are given preference.

Reporting to the Engineering Manager, Automation Engineer is responsible for: Designing automation scripts and finding solutions for automation problems Committed to developing skills to provide up-to-date solutions. Knowing & working with latest software stacks and test automation frameworks Cost effective operation and maintenance. Ensure efficient and effective engineering practices. Efficient liaison and coordination with all stakeholders Ensure implementation of departmental strategies and policies in compliance with HSE. Key Responsibilities:Departmental Goals: To ensure strict compliance of company policies and procedures. To provide efficient attractive and easy working environment to people. To improve continuously efficiency of automation operations in terms of cost and output. To keep all facility in good working conditions within energy consumption and environmental standards. Effective management of available resource to deliver time effective services up to end user. Maintaining good relations with all suppliers, vendors and facilitating them according to the company policy Functional Responsibilities of the Job: Primary Responsibilities: Monitor the field instruments and do the calibration as per plan schedule or as per the request of operation team in case of any issue or deviation. Maintain the record of calibrated instruments monthly wise as per schedule plan Provide the calibration information while audit time. Closely monitor and responsible the SERVER station to ensure the system are working fine as per standard and requirement Responsible for the network topology between Server, PLC & SCADA. To provide cross functional support (MTC team, Production & Quality) as & when needed. To maintain database up to date. Upload the PLC and HMI backup program yearly basis & communicate with machine supplier for master program. Help the quality and production team to find out the root cause of production contamination or losses with the help of MIS report, Object trending and items alarming history. Programming (Parameter setting) and troubleshooting variable frequency drives. Coordinate/Participate with project team to ensure the new installation is functioning & designed as per our standard. To ensure all the safety interlocks (Food Safety) are works fine while the commissioning and testing time. Make the proper plan for shutdown with production and quality team if required. Provide technical confirmation before placing the order to technical store. Take Purchase Queries & Follow up of Ordered Material. Review the store file yearly and suggest stopping to reorder the items which machine are not in use or obsolete, to minimize the store value. Familiar with shutdown jobs, shift routine jobs, Calibration, Servicing, Troubleshooting & Loop checking. Responsible for smooth operation of processing plants, modifications, improvements. Familiar with Control, maintain/Optimization the ROL (Re-Order Level) of critical spare parts. Effective knowledge of first line. troubleshooting, preventive (PM), corrective and breakdown maintenance on Instrument & Control System. Troubleshooting & Programming experience in various kinds of PLCS (SIEMENS & Allen Bradley) In depth knowledge of SCADA, PLC and HMI Configuration and equipment specification. Familiar with PLC programing standards Support the provision of the work environment to team members, by issuing proper material, tools, and safety equipments. Co-ordination all maintenance activities of installed equipment including the weekly, monthly, and yearly plans. Strong fault-finding experience on different Automation Networks like Ethernet, Profibus, Profinet, Device Net, Control Net, Fiber Optic & Asi Networks. Strong knowledge of Maintenance & troubleshooting of HART & SMART protocol transmitters of ROSEMOUNT, SIEMENS, E+H, ABB, ALLEN BRADELY, DANFOSS Familiar with reading Electrical control wiring diagram and loop checking of entire field instruments, Control valves, Control system & Motors. Effective knowledge of the Lock Out Tag Out Processes Working with SAP for PM, Material Ordering and Requesting, Calibration report & for closing work order/Notification. Secondary Responsibilities Design systems for new, or modify existing, automated machinery to automate manufacturing processes. Design and specify some electrical components for custom automated industrial machines Plan and supervise maintenance jobs and manage spares inventories either at plant or through 3rd parties or OEMs. Establish technical manuals, drawings, models, training documentation, preventative maintenance plans and troubleshooting guides for newly established automated equipment/processes Manage individual project budgets and schedules and routinely report progress Ability to self-direct on projects and tasks and the ability to manage a team Administrative Responsibilities of the job: Issuing work permits for specific jobs in specific areas with clear instructions of safety, hygiene, and health Record keeping of M & R data. Record keeping of logbooks. Be administratively responsible for conduct of his direct reporting employees. Take necessary action in case of violation of rules and code of conduct including issuance of warning letter where required RELATED JOB REQUIREMENTS/ QUALIFICATIONS4+ years of relevant Automation experience. PLC technical certification In-depth knowledge of manufacturing and mechanical processes Knowledge of software design principals Detailed knowledge of PLC automation software and coding languages Ability to work with minimal supervision Experience with PLC S7-1500, S7-400 Experience in PLC Programming language STL, SCL, LL Experience in HMI Programming Ability to coordinate with outside suppliers Mechanically inclined, strong problem-solving skills, hands-on individual Excellent oral and written communication skills.

We are seeking a skilled PLC Engineer with 2 to 3 years of experience to join our team in Ghaziabad, India. The ideal candidate will have an I.T.I. qualification and a strong understanding of programmable logic controllers.Key Responsibilities:- PLC Programming: Design, develop, and implement PLC programs for various automation projects to ensure efficient operation of machinery and processes.- Troubleshooting: Identify, diagnose, and resolve issues related to PLC systems and equipment to minimize downtime and maintain production efficiency.- System Integration: Collaborate with other engineering teams to integrate PLC systems with existing machinery and software for seamless operation.- Documentation: Maintain accurate project documentation, including flowcharts, wiring diagrams, and programming manuals to ensure compliance and ease of future troubleshooting.- Testing and Commissioning: Conduct tests and evaluations of PLC systems to verify their functionality and performance, making necessary adjustments as required.Required Skills and Expectations:The successful candidate must possess strong analytical and problem-solving skills, with a thorough understanding of electrical circuits and automation processes. Proficiency in programming languages such as Ladder Logic and familiarity with HMI (Human-Machine Interface) systems is essential. The candidate should demonstrate good communication skills and be able to work collaboratively with different teams while maintaining a strong focus on safety and quality standards. A commitment to continuous learning and improvement in the field of automation technology is also expected.

We are from SSRDP Trust (a unit of Art of Living). we conduct vocational training which collaboration with NSDC and other Corporate. currently we are looking for a trainer of Industrial Automation Training program.

Reporting Send to HOD maintenance and utility manager.Maintenance of Electrical panel control & Power CkT.Installation of Electrical Measuring Device for measure the Electrical Quantity.Installation the Electrical protective device to protect the Electrical Equipment.Maintenance and installation the motors & motors starters Dol& star delta starter, electrical fan, lights,Maintenance of the DG set 1250 kva, 625 kva ,1010 kva .Make the schedule, log book & planning of preventive maintenance of electrical equipment.Electrical maintenance in ccm machines continue compress machine. compressor Like as GA 37,GA 90, GA 55+ and GA 55 water and air cool compressor . With air dryer .and chillers works Maintenance of transformer 3000 kva , 33kv to 415 volt . Maintained power factor and control wiring systems knowledge. Make daily power consumption reports and daily breakdown reports .All vfd program upload and download and repair work .working with vfd Abb ,danfoss,allen Bradley ,yaskawa, Omron, delta, Fuji,etc.HMI ,drive ,smps , etc. Electronic equipment normal repair work knowledge. Ammonia screws Compressor, Allen Bradley soft starter, plc Allen Bradley 1400,seimens Equipment trouble shooting with scada. plc must

Key Responsibilities: Design and develop PLC programs using platforms such as Siemens, Allen-Bradley, Mitsubishi, Schneider Electric, etc. Create and modify HMI (Human-Machine Interface) applications for enhanced user interaction. Integrate PLCs with other devices like sensors, actuators, and SCADA systems. Troubleshoot and optimize control systems to ensure efficiency and reliability. Conduct debugging, testing, and commissioning of automation systems on-site or remotely. Perform regular maintenance, updates, and troubleshooting of existing control systems. Prepare detailed documentation for PLC code, wiring diagrams, system architecture, and user manuals. Maintain a record of program revisions and ensure version control. Coordinate with cross-functional teams to understand project requirements and provide technical expertise. Train and mentor junior programmers and technicians in PLC programming and troubleshooting.

As an Automation Project Engineer, you will be responsible for designing, implementing, and maintaining automation projects. You will work closely with teams to ensure efficient processes and systems. You will have the opportunity to learn and grow in a dynamic environment, applying your engineering knowledge to real-life projects.Key Responsibilities:- Project Design and Development: Collaborate with team members to design automation systems tailored to specific project requirements. This includes creating detailed project plans and timelines.- System Installation and Configuration: Assist in the installation of automation systems, ensuring they are set up correctly and function as intended. You will also configure systems to meet operational needs.- Testing and Quality Assurance: Conduct tests on the automation systems to verify their performance and reliability. You will analyze results and make necessary adjustments for optimization.- Technical Support and Troubleshooting: Provide ongoing support for installed systems, identifying and resolving issues as they arise to minimize downtime for users.- Documentation: Maintain comprehensive documentation of project processes, system configurations, and troubleshooting steps for future reference.Required Skills and Expectations:You should hold a Bachelors degree in Engineering (B.E.) and have a keen interest in automation technologies. Strong analytical and problem-solving skills are essential. You should possess good communication abilities to work effectively in a team and convey technical information clearly. A willingness to learn and adapt to new technologies is important. As the position is open to freshers, initiative and enthusiasm in applying engineering principles will be valued.

Job DescriptionConfiguration & Programming of wireless data modems for IoTNOC based support to field engineering teamSystem provisioning on ERPMIS generationTesting & DebuggingImpart technical trainingResolve Technical QueriesEnsure ticket resolution within TATDesired Candidate ProfileB.Tech/Diploma in Computers, E&CAbove 75% in Class XIIExcellent CommunicationExcellent IT skills, Excel, Word, AndroidTeam playerCalm, mature & able to handle difficult situationsHigh EnergySelf Motivated

Role Description- Design system architecture- Program PLCs (we work on different stuff, so be ready for that but mostly it will be Siemens) - SCADA design & development - Can cut wires and put them in place, if needed - Read electrical drawings, P&IDs, programs written by other people, and everything else that a programmer needs to - Open to reading 1000 different manuals and making things works - Writing programs from scratch to troubleshooting running machines Qualifications- Degree: Doesnt matter, dont care - Experience: Minimum 3 years of doing all the above will probably qualify you to clear the interview but if youre someone who learnt it all in just 6 months, fine by us! - Skills: Everything that lets you do jobs written above

Strong knowledge of PLC programming & troubleshootingExperience in industrial automation systemsUnderstanding of control panels, sensors, and instrumentationAbility to handle installation, commissioning & maintenance workWillingness to travel for site support

Key ResponsibilitiesDesign, install, test, and maintain electrical systems, equipment, and components.Monitor electrical operations and ensure compliance with safety and quality standards.Perform preventive and corrective maintenance of electrical equipment and machinery.Troubleshoot electrical faults and implement timely solutions to minimize downtime.Prepare electrical drawings, technical specifications, and project documentation.Conduct inspections and electrical testing to ensure operational reliability.Coordinate with production, maintenance, and project teams on electrical requirements.Ensure compliance with statutory regulations, electrical codes, and safety procedures.Support the installation and commissioning of new equipment and systems.Analyze energy consumption and recommend efficiency improvement measures.Manage contractors and vendors involved in electrical projects.Maintain accurate maintenance records, reports, and technical documentation.

Procure and manage consultants and contractors, and initiate and develop comprehensive construction contract documents.design, civil engineering, structural, HVAC, and construction aspects.Conduct systems engineering surveillance on GPS satellite design and build for the DoD.Visit customer sites for installation and troubleshooting of PLC, HMI, PC, and SCADA systems.Work in a variety of projects, including bridge repair, interchange rehab/construction, paving projects, concrete slab replacement.Track contractor deadlines for submittals require for schedule material delivery.Provide input for the management of traffic management policies according to MUTCD specifications.Track and obtain all project submittals and distribute accordingly for architect/engineer and owner approvals.Prepare Powerpoint presentation on Caltrans policy and procedures on freeway maintenance and present to foreign delegates.

Job Profile:Summary: Required Of Eng. Electrical with an education in Min. BE Electrical with experience of 8 to 12 years in Dyes & Intermediate or Chemical Industry. Job Responsibilities: 1) Develop, and maintain electrical systems for production and utility areas within the chemical plant.2) Ensure all electrical installations and modifications comply with safety standards, codes, and regulations (e.g., NEC, IEC, OSHA, ATEX).3) Troubleshoot and resolve electrical issues in process equipment, including motors, drives, control panels, and instrumentation.4) Compulsory knowledge of VFD. Support PLC and DCS systems used in process automation.5) Coordinate with maintenance, instrumentation, and process engineering teams to optimize equipment performance. 6) Knowledge of Electrical technical specifications for electrical equipment. 7) Conduct regular preventive maintenance and predictive diagnostics on electrical systems.8) Lead or participate in electrical projects including upgrades, expansions, and energy efficiency improvements. 9) Operations of DG Sets. Maintain ace of MCC and PCC Panels. 10) Maintain up-to-date documentation including wiring diagrams, control logic, and power distribution layouts.11) Ensure safe work practices and participate in safety audits and HAZOP reviews. Employee Benefits: PF, Gratuity, Bonus, Free Transportation, Free Canteen, Mediclaim (For full Family), Referral Benefits.

Job DescriptionConfiguration & Programming of wireless data modems for IoTNOC based support to field engineering teamSystem provisioning on ERPMIS generationTesting & DebuggingImpart technical trainingResolve Technical QueriesEnsure ticket resolution within TATDesired Candidate ProfileB.Tech/Diploma in Computers, E&CAbove 75% in Class XIIExcellent CommunicationExcellent IT skills, Excel, Word, AndroidTeam playerCalm, mature & able to handle difficult situationsHigh EnergySelf Motivated

We need 4 Engineers to work permanently at Saudi Arabia.Testing & Commissioning for MV & HV Switchgear, Relay and Control scheme , Numerical Protection Relays , troubleshooting for daily operation sub stations.Experience in maintaining protective Relays & Control equipment for 33-230 kV Substation Substations and Transmission Lines.Installation, calibration, adjustment and perform Preventive maintenance on protective relays, relaying schemes, control circuits, Power Line carrier, Fault recorders, Sequence of Event recorders and metering equipment in Power Plants and substations.Experience on Numerical, Static and Electro-Mechanical Relays for the protection of Lines, Transformers, Bus bars, and Breaker Back-up etc.Well experienced with schemes of Differential, Distance, O/C, E/F, directional, REF, Bus bar Differential, Breaker failure protections supplied by the ABB/AREVA/Siemens/GE etc.Perform maintenance of ABTS, PLC, Battery chargers and SCADA controls.Undertake more independent work concerned with commissioning of new protective equipment, troubleshooting of equipment tripping and analyzing test results.

Key ResponsibilitiesAssess customer needs, understand their process and refer to their specificationsMaintain highest level of customer satisfaction through respectful and cordial communication with the client, his representatives, and all members of the Qualtech teamParticipate in automation design estimates and quotesRespect Qualtech project management guidelines and protocolsProactively look for and recommend improvements in processes and proceduresCoordinate automation activities with the project managerMap the electrical requirements for the Electrical engineering teamDevelop a detailed project plans with the PMs to track project progress (cost, schedule)Support the design, engineering, and commissioning of new control systemsLadder PLC programming, mainly with Rockwell Software. Studio5000, CCW, RSLogix 5000 and 500.HMI programming Rockwell Software FactoryTalkView ME and SE.Diagnose the causes of failures, decide on corrective actions to be taken and ensure the repair of defective equipmentI/O verificationsEmergency service call supportRequirements:6+ years experience in process control automation design, PLC programming, field installation, performance testing, commissioning, troubleshooting and operation preferably in the Food and Beverage or Liquid Processing industriesSolid technical background, with understanding or hands-on experience with control loops and PID programmingAbility to adapt to the Qualtech programming standards for specific systems. Offer recommendations for optimization and improvements where identified.Experience with Wonderware HMI/SCADA/IIM suite of products is an assetKnowledge of and experience reading, analyzing P&IDs and electrical drawings

PLC EngineerExperience: 9-12 YearsLocation: HyderabadHiring Company: Talent Zone ConsultantBrief JD:We are hiring a Senior PLC Engineer with strong experience in industrial automation, PLC programming and control systems. The role involves PLC/HMI programming, machine automation, commissioning, troubleshooting and coordination with project and customer teams.Key Responsibilities:Develop, modify and troubleshoot PLC programs.Configure and integrate HMI/SCADA systems.Execute automation projects from design through commissioning.Perform machine testing, commissioning and troubleshooting.Coordinate with electrical, mechanical and project teams.Provide onsite technical support to customers.Prepare technical documentation and project reports.Relevant Skillset:PLC Programming, Industrial Automation, Siemens PLC, Allen Bradley, Rockwell, HMI, SCADA, VFD, Servo, Motion Control, Control Systems, Electrical Panels, Commissioning, Troubleshooting, AutoCAD, TIA Portal

Service Engineer - Automation Industrial AutomationExperience: 6-9 YearsLocation: PuneHiring Company: Talent Zone ConsultantBrief JD:We are hiring a Service Engineer - Automation with strong experience in industrial automation equipment and control systems. The role involves installation, commissioning, troubleshooting, preventive maintenance and providing technical support to customers at site.Key Responsibilities:Install, commission and service automation systems.Troubleshoot PLC, HMI, VFD, servo and control system issues.Conduct preventive and corrective maintenance.Provide onsite technical support and resolve customer issues.Coordinate with engineering and project teams.Prepare service reports and technical documentation.Travel to customer sites as required.Relevant Skillset:Industrial Automation, Service Engineering, PLC, HMI, VFD, Servo, SCADA, Sensors, Control Systems, Electrical Troubleshooting, Installation, Commissioning, Preventive Maintenance, Field Service, Customer Support

Senior Robotics Engineer Robotics / Industrial AutomationExperience: 12-14 YearsLocation: BangaloreHiring Company: Talent Zone ConsultantBrief JD:We are hiring a Senior Robotics Engineer with strong experience in industrial robotics and automation systems. The role involves robot programming, system integration, commissioning, troubleshooting, and leading robotic automation projects across manufacturing environments.Key Responsibilities:Lead robotic automation projects from design to commissioning.Develop and optimize robot programs and motion sequences.Integrate robots with PLCs, vision systems and peripheral equipment.Perform robot installation, testing and commissioning.Troubleshoot robotic and automation systems.Coordinate with customers, vendors and engineering teams.Guide junior engineers and ensure project timelines are met.Relevant Skillset:Industrial Robotics, Robot Programming, Robotic Automation, PLC, HMI, SCADA, Robot Integration, Machine Vision, Motion Control, Servo, ABB, FANUC, KUKA, Yaskawa, Commissioning, Troubleshooting, System Integration

Key Responsibilities:1. Design and develop industrial automation systems: In this role, you will be responsible for designing and developing automation systems for industrial processes, ensuring efficiency and reliability.2. Program PLCs and HMIs: You will be required to program Programmable Logic Controllers (PLCs) and Human Machine Interfaces (HMIs) to control various machinery and processes in industrial settings.3. Troubleshoot and maintain automation systems: You will need to troubleshoot any issues that arise with automation systems and perform regular maintenance to ensure optimal performance.4. Collaborate with cross-functional teams: As an Industrial Automation Engineer, you will work closely with other engineering teams, production teams, and technicians to integrate automation solutions and optimize processes.5. Stay updated on industry trends and technologies: You will be expected to keep yourself informed about the latest trends and technologies in industrial automation to enhance systems and processes continuously.Required Skills and Expectations:1. Bachelor's degree in Engineering, preferably in Electrical or Mechanical Engineering.2. Knowledge of PLC programming and HMI development.3. Strong problem-solving skills and the ability to troubleshoot technical issues.4. Good communication skills and the ability to work effectively in a team.5. Attention to detail and a proactive approach to work.6. Willingness to learn and adapt to new technologies in the field of industrial automation.

Innovic India Pvt. Ltd. is hiring for B.E/B.Tech/Diploma/ITI Fresher engineer/Electrical Engineer/Mechanical Engineer/Instrumentation & Control Engineer for Patna, Noida, Delhi NCR Location.We are seeking Fresher Electrical Engineer with Hands on Practical Training on Industrial Automation( PLC, SCADA, DCS, HMI, VFD, Instrumentation, Panel Designing, AutoCAD Designing etc...Interested candidate can contact us on +91-8882999066Email- bharti.innovic@gmail.comEmail- www.innovicindia.com

We are Looking Fresher Mechanical Engineer Who have Good Practical Knowledge of Industrial Automation Tools Like, Plc, Scada,Hmi, Vfd, Dcs. Panel Designing Etc..