Mechanical Engineer Job Vacancies in Oragadam

Greeting From Vishakan Placement Service!!! Hiring Senior Process Operator Position: Junior Process Operator - E-Waste Chemical RecoveryDepartment: Production / Process OperationsIndustry: E-Waste Chemical RecoveryOnly Experience: 2-4 years in chemical/process plants, metal recovery, e-waste recycling or related industries; freshers may be considered.Qualification: ITI /Any Diploma /B.E Chemical Engineering, B.E Mechanical Engineering & Bsc. Chemistry background preferred.Shift Timing: 8 Hrs Rotational 1- Rotational Week-Off Reports To: Shift In-Charge / Production SupervisorJOB DESCRIPTION - Sr.PROCESS OPERATOR1. Operate e-waste recycling process equipment as per SOP and instructions from the Process Controller/Supervisor.2. Receive, prepare, and charge raw materials into designated tanks/reactors as per batch requirements.3. Verify raw-material quantity, batch number, tank number, and charging sequence before operation.4. Handle and charge process chemicals safely as per approved SOP and required quantities.5. Operate tanks, reactors, agitators, pumps, valves, filters and related process equipment.6. Monitor process parameters such as pH, temperature, tank level, pressure, flow, and process time.7. Carry out tank-to-tank material transfer and ensure correct pipeline and valve alignment.8. Operate filtration equipment and monitor filtration flow, pressure, and performance.9. Collect, handle, and transfer filter cake/solid material without batch contamination.10. Perform routine inspection of tanks, pumps, filters, pipelines, valves, and other equipment.11. Report equipment breakdowns, leaks, spills, abnormal reactions, or process deviations immediately.12. Take process samples and maintain required process and production records.13. Maintain accurate records of raw materials, chemicals, production quantities, filtration, and material transfers.14. Follow all safety procedures, PPE requirements, chemical-handling practices, and housekeeping standards.15. Support the Process Controller/Supervisor in achieving safe, efficient, and continuous production.Fixed Salary:25 K - 35 K CTC + ESI+ PF + Medical Insurance Overtime (OT) Policy - OT eligibility and applicable OT rates 1.5 TimesAllowances - attendance allowance, Chemical AllowancesCab / Transportation Facility - based on the timing and pick up from dedicated pointsAccommodation - Near Kandigai / Oragadam ( Company Provided)Food Facility / Meal Allowance - BF, Lunch and Dinner based shift basis and We provided on subsidy for the foodNo of openings: 40Male candidate only Age limit: Till 35Interview Process: HR Round-Technical Round Immediate Joiner Must Work Location:, Oragadam, Ezhichur Village(Sriperumpudur Taluk,Kanchipuram(DT) - 603204)If Candidate Interested For Job Please Call Immediately & share your Cvs Call/Whatsapp: Vishakan Placement Service HR Pradeep

Our Recruitment is Rushing up so grab it quickly to get a job within a week.Criteria:Qualification:DIP,BE/B.Tech MECH/EEE/ECE/ARTSDesignation: Graduate Engineer traineeRole: Quality / Production/Assembly/ maintenanceEligible batches: 2020-2025Work Location: Around ChennaiSalary: 18 to 25k+ OTShift : Rotational Shift/Food /transport and accommodation freeJob Type: Permanent & Full timeFor further details contact:Hedwell technologiesNo.2/6, Banu Avenue,Tambaram Sanatorium, Near by IOB BankChennai - 600 047

Job Openings for 3 Maintenance Engineer Jobs with minimum 3 Years Experience in Sriperumbudur, Tamil Nadu,Oragadam, Kanchipuram, Tamil Nadu,Press Machines,Robotic Welding, having Educational qualification of : Diploma, Professional Degree with Good knowledge in PLC,Mechanical Maintenance,Utility Maintenance,Electrical Maintenance,Preventive Maintenance, Press Machines,Robotic Welding etc.

Leading Core industry Hiring BE /B.Tech Fresher in quality Engineer-2016-2022We are hiring Mechanical, Auto candidates freshers in manufacturing industries.Qualification: Diploma / B.E/B.tech/ARTS (MALE&FEMALE)Industry: Manufacturing industriesFunctional areas: Production/Quality/Maintenance/Designation: GET/GAT/Trainee/Salary: As per industry normsWork timing: 8 hrs.rotational shiftJob location: Chennai,job placement with in one day process.service charge after placement after getting salary only.Arrears candidates also can apply for this job!!! (Freshers are most welcome)Additional facilities:ESI & PF Food, Accommodation & Transportation (as per industry)Without any technical rounds. Direct joining.Interested and Immediate joiner Candidates can make a call or share your resumeCompany Name : Hedwell Technologiescontact

Dear Candidate :We are Openings for BE BTech (Mech/EEE/ECE/Auto/Aero/IT) Production/ Quality/ Assembly / Maintenance 2018 - 2021..Criteria:Qualification : BE Btech ( Mech/ECE/EEE/Auto/Aero) PassedOut : 2017 - 2021Role : Production / Quality /Assembly/MaintenanceJob Type : Full TimeJob Time : Rotational Shift (8hrs Working Time)Salary : 14500 to 17000Gender : MaleIf any doubt clarification Contact Below :CONTACT

Greeting From Vishakan Placement Service !!! Hiring Junior Process Operator Technician (Fresher Graduate)Position: Junior Process Operator Technician - E-Waste Chemical RecoveryDepartment: Production / Process OperationsIndustry: E-Waste Chemical RecoveryShift Timing: 8 Hrs Rotational 1- Rotational Week-Off Reports To: Shift In-Charge / Production SupervisorJD:Handle and charge processed e-waste/raw materials into leaching tanks as per SOP and batch requirements.Handle process chemicals safely and follow approved chemical addition procedures.Operate leaching tanks, agitators, pumps, valves and chemical dosing systems.Monitor and record process parameters such as pH, temperature, level, time and agitation.Operate filter press/filtration equipment and handle slurry and filtrate safely.Collect, segregate, weigh and transfer sludge/filter cake/residues to designated areas.Assist in metal recovery processes such as precipitation, cementation or electrowinning as per SOP.Collect process samples and coordinate with QC/Lab for analysis.Maintain batch sheets, chemical consumption, production, recovery and shift records.Perform basic equipment checks and immediately report leaks, blockages, breakdowns or abnormalities.Follow PPE, EHS, chemical handling, LOTO and emergency procedures at all times.Maintain good housekeeping, 5S and cleanliness around the process area.Qualification: ITI / Diploma / 12th Science; B.E Chemical Engineering, B.E Mechanical Engineering & Bsc. Chemistry background preferred.Experience: 0-4 years in chemical/process plants, metal recovery, e-waste recycling or related industries; freshers may be considered.Key Skills: Safety awareness, SOP compliance, basic chemical/process knowledge, teamwork, documentation and willingness to work in shifts.Fixed Salary:20 K CTC + ESI+ PF + Medical Insurance Overtime (OT) Policy - OT eligibility and applicable OT rates 1.5 TimesAllowances - attendance allowance, Chemical AllowancesCab / Transportation Facility - based on the timing and pick up from dedicated pointsAccommodation - Near Kandigai / Oragadam ( Company Provided)Food Facility / Meal Allowance - BF, Lunch and Dinner based shift basis and We provided on subsidy for the foodNo of openings: 35 Male candidate only Interview Process: HR Round-Technical Round Immediate Joiner Must Work Location:, Oragadam, Ezhichur Village(Sriperumpudur Taluk,Kanchipuram(DT) - 603 204)If Candidate Interested For Job Please Call Immediately & share your Cvs Call/Whatsapp: Vishakan Placement Service HR Pradeep jobvpservice@gmail.com

Greeting From Vishakan Placement Service Hiring Maintenance Head (Engineer)!!!Role/ Position: Maintenance Head Industry: E-Waste Chemical RecoveryDepartment: Maintenance Experience: 8+ Yrs Qualification: Diploma EEE/Mech & B.E (EEE/Mech)Job Summary & Responsibility:1. Maintenance Strategy & ExecutionDevelop, schedule, and oversee daily, weekly, and shutdown maintenance for chemical, metallurgical, and mechanical assets.Implement Preventive Maintenance (PM) and Predictive Maintenance (PdM) programs (vibration analysis, thermography, oil analysis, thickness testing, corrosion monitoring).Plan and execute turnarounds (major refractory relines, chemical scrubber overhauls, electrical distribution servicing).2. Process Safety & Corrosion ManagementManage maintenance of equipment handling aggressive chemicals (sulfuric, hydrochloric, caustic, or solvent-based circuits) - including lining integrity, gaskets, and material selection.Maintain critical safety devices: pressure relief valves, rupture discs, emergency isolation valves, gas detection, flame monitoring systems.3. Aluminum Alloy Manufacturing SupportMaintain melting/holding furnaces - burner management systems, recuperators, thermocouples, charge well tilting mechanisms.Manage molten metal contact components (launders, troughs, spouts, degassing rotors) - preventive change-outs to avoid refractory failures.Maintain casting equipment: water cooling systems, mold tables, hydraulic shears, billet handling.Ensure hot work and molten metal area safety protocols are integrated into all maintenance permits.4. General Engineering WorkshopManage compressed air systems (dryers/filters), overhead cranes (periodic statutory inspection), forklifts, and general lifting tackle.5. People & Contractor ManagementLead, train, and schedule mechanical, electrical, instrumentation, and welding technicians (direct and indirect).Develop skills matrix - especially for hazardous area work, hot work, confined space entry, and chemical handling.Manage external contractors for specialist work (refractory installation, NDT, high-voltage, thermography).6. Budget & Spares OptimizationPrepare and control maintenance budget (labor, materials, third-party services, consumables).Manage critical spares strategy 7. Reliability & Continuous ImprovementLead root cause analysis (RCA) for unplanned failures - especially chemical leaks, furnace refractory failures, or pump seal failures.Track Overall Equipment Effectiveness (OEE) .Implement reliability improvements (e.g., upgraded seal materials, better refractory design, machine PM optimization).8. HSE & ComplianceIssue and audit safe work permits (hot work, confined space, work at height, electrical isolation, line breaking for chemical lines).Ensure statutory inspections: pressure vessels, cranes, lifting equipment, electrical systems, fire suppression.Lead maintenance contribution to process hazard analyses (HAZOPs) and pre-startup safety reviews (PSSRs).Fixed Salary: 50 K Takehome+ PF+Medical Insurance (As Per interview performance & Experience based )C License Holder & B License Holder Shift Timing: 8 hrs Rotational / 1- Rotational WeekOff Overtime (OT) Policy - OT eligibility and applicable OT rates 1.5 TimesPF & ESI - ApplicableCab / Transportation Facility: Oragadam Pickup pointAccommodation - Near Kandigai / Oragadam ( Company Provided)Food Facility / Meal Allowance - BF, Lunch and Dinner based shift basis and We provided on subsidy for the foodNo of openings: 5 Male Candidate only Interview round: HR Round - MD Round Immediate Joiner Must Work Location:, Oragadam, Ezhichur Village(Sriperumpudur Taluk,Kanchipuram(DT) - 603 204)