Fresher Maintenance Technician Jobs

An Aircraft Maintenance Engineer (AME) is responsible for inspecting, maintaining, repairing, troubleshooting, and certifying aircraft to ensure they are safe, airworthy, and compliant with aviation regulations. The role involves carrying out scheduled and unscheduled maintenance on aircraft systems, engines, avionics, electrical components, hydraulic systems, landing gear, and structural components while adhering to the standards established by aviation authorities.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine, preventive, scheduled, and unscheduled aircraft maintenance.Conduct daily, transit, weekly, A-check, B-check, C-check, and heavy maintenance inspections.Inspect aircraft structures, fuselage, wings, landing gear, flight controls, and engines.Diagnose and rectify aircraft defects using approved maintenance procedures.Replace, repair, and overhaul defective aircraft components.Ensure all maintenance tasks are completed according to the Aircraft Maintenance Manual (AMM).Troubleshooting & RepairsIdentify mechanical, hydraulic, electrical, pneumatic, and avionics faults.Use specialized diagnostic tools and testing equipment.Repair aircraft systems while maintaining manufacturer specifications.Coordinate with engineering teams for complex technical issues.Perform functional tests after repairs to verify serviceability.Engine & Component MaintenanceInspect aircraft engines for wear, leaks, corrosion, and damage.Perform engine servicing, oil changes, filter replacement, and component inspections.Maintain propellers, Auxiliary Power Units (APU), and fuel systems.Monitor engine performance and recommend corrective actions.Avionics & Electrical SystemsInspect communication and navigation systems.Maintain radar, autopilot, cockpit instrumentation, and electrical wiring.Test aircraft electronic systems for operational reliability.Ensure compliance with avionics maintenance procedures.Documentation & ComplianceComplete maintenance logs, inspection reports, and defect records.Maintain aircraft technical documentation accurately.Ensure compliance with aviation regulatory authorities.Certify aircraft for return to service after maintenance (where appropriately licensed).Follow company maintenance policies and quality assurance procedures.Safety & Quality AssuranceFollow all aviation safety regulations and standard operating procedures.Maintain clean and organized work areas.Ensure proper use of Personal Protective Equipment (PPE).Report safety hazards and technical discrepancies immediately.Participate in safety audits and quality inspections.Team CoordinationWork closely with pilots, technicians, quality inspectors, and operations staff.Coordinate maintenance schedules with flight operations.Assist junior technicians with technical guidance and training.Participate in emergency aircraft recovery and AOG (Aircraft on Ground) support.Required QualificationsDiploma or Bachelor's Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Mechanical Engineering, or Aerospace Engineering.DGCA-approved AME qualification or equivalent aviation authority certification is preferred.Valid Aircraft Maintenance Engineer License (where applicable).Type rating on specific aircraft is an advantage.Relevant experience in aircraft maintenance is preferred.Required SkillsStrong knowledge of aircraft systems and maintenance procedures.Excellent troubleshooting and fault diagnosis skills.Knowledge of aviation regulations and airworthiness standards.Ability to interpret aircraft maintenance manuals and engineering drawings.Strong analytical and problem-solving abilities.Excellent attention to detail.Good communication and teamwork skills.Ability to work under pressure and meet strict deadlines.Computer proficiency in maintenance management software.Good technical documentation skills.Technical KnowledgeAircraft StructuresGas Turbine EnginesHydraulic SystemsPneumatic SystemsElectrical SystemsAvionics SystemsFlight Control SystemsLanding Gear SystemsFuel SystemsAircraft DocumentationMaintenance PlanningAircraft Safety StandardsPreferred CertificationsDGCA Aircraft Maintenance Engineer LicenseEASA Part-66 License (preferred internationally)ICAO-compliant aviation trainingHuman Factors TrainingSafety Management System (SMS) TrainingFuel Tank Safety TrainingEWIS (Electrical Wiring Interconnection System) TrainingAircraft Type Rating CertificationWorking ConditionsAirport hangars, maintenance bases, and line maintenance stations.Rotational shifts including nights, weekends, and public holidays.Outdoor work in varying weather conditions.Physically demanding work involving standing, climbing, bending, and lifting equipment.Exposure to aircraft noise, fuels, lubricants, and hydraulic fluids while following strict safety procedures.Salary Range (India)Fresher: 3.5 - 6 LPA2-5 Years: 6 - 10 LPA5-10 Years: 10 - 18 LPALicensed/Type-Rated AME: 15 - 30+ LPA (depending on airline, aircraft type, and experience)

An Aircraft Maintenance Engineer (AME) is responsible for inspecting, maintaining, repairing, troubleshooting, and certifying aircraft to ensure they are safe, airworthy, and compliant with aviation regulations. The role involves carrying out scheduled and unscheduled maintenance on aircraft systems, engines, avionics, electrical components, hydraulic systems, landing gear, and structural components while adhering to the standards established by aviation authorities.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine, preventive, scheduled, and unscheduled aircraft maintenance.Conduct daily, transit, weekly, A-check, B-check, C-check, and heavy maintenance inspections.Inspect aircraft structures, fuselage, wings, landing gear, flight controls, and engines.Diagnose and rectify aircraft defects using approved maintenance procedures.Replace, repair, and overhaul defective aircraft components.Ensure all maintenance tasks are completed according to the Aircraft Maintenance Manual (AMM).Troubleshooting & RepairsIdentify mechanical, hydraulic, electrical, pneumatic, and avionics faults.Use specialized diagnostic tools and testing equipment.Repair aircraft systems while maintaining manufacturer specifications.Coordinate with engineering teams for complex technical issues.Perform functional tests after repairs to verify serviceability.Engine & Component MaintenanceInspect aircraft engines for wear, leaks, corrosion, and damage.Perform engine servicing, oil changes, filter replacement, and component inspections.Maintain propellers, Auxiliary Power Units (APU), and fuel systems.Monitor engine performance and recommend corrective actions.Avionics & Electrical SystemsInspect communication and navigation systems.Maintain radar, autopilot, cockpit instrumentation, and electrical wiring.Test aircraft electronic systems for operational reliability.Ensure compliance with avionics maintenance procedures.Documentation & ComplianceComplete maintenance logs, inspection reports, and defect records.Maintain aircraft technical documentation accurately.Ensure compliance with aviation regulatory authorities.Certify aircraft for return to service after maintenance (where appropriately licensed).Follow company maintenance policies and quality assurance procedures.Safety & Quality AssuranceFollow all aviation safety regulations and standard operating procedures.Maintain clean and organized work areas.Ensure proper use of Personal Protective Equipment (PPE).Report safety hazards and technical discrepancies immediately.Participate in safety audits and quality inspections.Team CoordinationWork closely with pilots, technicians, quality inspectors, and operations staff.Coordinate maintenance schedules with flight operations.Assist junior technicians with technical guidance and training.Participate in emergency aircraft recovery and AOG (Aircraft on Ground) support.Required QualificationsDiploma or Bachelor's Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Mechanical Engineering, or Aerospace Engineering.DGCA-approved AME qualification or equivalent aviation authority certification is preferred.Valid Aircraft Maintenance Engineer License (where applicable).Type rating on specific aircraft is an advantage.Relevant experience in aircraft maintenance is preferred.Required SkillsStrong knowledge of aircraft systems and maintenance procedures.Excellent troubleshooting and fault diagnosis skills.Knowledge of aviation regulations and airworthiness standards.Ability to interpret aircraft maintenance manuals and engineering drawings.Strong analytical and problem-solving abilities.Excellent attention to detail.Good communication and teamwork skills.Ability to work under pressure and meet strict deadlines.Computer proficiency in maintenance management software.Good technical documentation skills.Technical KnowledgeAircraft StructuresGas Turbine EnginesHydraulic SystemsPneumatic SystemsElectrical SystemsAvionics SystemsFlight Control SystemsLanding Gear SystemsFuel SystemsAircraft DocumentationMaintenance PlanningAircraft Safety StandardsPreferred CertificationsDGCA Aircraft Maintenance Engineer LicenseEASA Part-66 License (preferred internationally)ICAO-compliant aviation trainingHuman Factors TrainingSafety Management System (SMS) TrainingFuel Tank Safety TrainingEWIS (Electrical Wiring Interconnection System) TrainingAircraft Type Rating CertificationWorking ConditionsAirport hangars, maintenance bases, and line maintenance stations.Rotational shifts including nights, weekends, and public holidays.Outdoor work in varying weather conditions.Physically demanding work involving standing, climbing, bending, and lifting equipment.Exposure to aircraft noise, fuels, lubricants, and hydraulic fluids while following strict safety procedures.Salary Range (India)Fresher: 3.5 - 6 LPA2-5 Years: 6 - 10 LPA5-10 Years: 10 - 18 LPALicensed/Type-Rated AME: 15 - 30+ LPA (depending on airline, aircraft type, and experience)

Indigo Airlines jobs ground staff available.Full time job available apply fast and joinNow we are hiring for indigo AirlinesIndigo Airlines near by jobs available apply fast and join usFreshers apply fast and join us indigo Airlines urgent hiring1. Manager. 650002.Supervisor . 420003. Driver . 350004.Helper. 220005. Guard .250006. Ticket excutive ,380007. Passport checker. 420008. Cash Counter executive. 450009. Lodder. 2500010. Ramp assistant. 3500011. Cargo executive. 32000All facilities like PF, ESI, INSURANCE, CAB AND ACCOMMODATION provide to selected candidates.Indigo Airlines vacancyGround Staff and Security line.JOB LOCATION:Nearest Airport in Home LocationAll Domestic/International Airports.COMMUNICATION SKILL:Candidates Good Communication Skill, Good Personality.LANGUAGE KNOWN:Hindi, English Language.AGE LIMIT:Driver: 18 to 54 Years.Ground Staff : 18 to 42 Years.Security Staff:18 to 42 Years.DRIVER (150) POSTLocation. Near by Airport availableApply fast and join usCall HR

We are seeking dedicated individuals for the role of Ground Staff in Dehradun, India. This position is ideal for those looking to start their career and requires a commitment to providing excellent service in a busy environment.nnKey Responsibilities:nn1. Customer Service: Greet and assist passengers, ensuring their travel experience is smooth and pleasant.n2. Check-In Assistance: Help passengers with the check-in process, including baggage handling and issuing boarding passes.n3. Coordination: Work closely with team members to ensure all flight operations run efficiently and on time.n4. Safety Compliance: Adhere to safety regulations and procedures to ensure a safe environment for passengers and staff.nnRequired Skills and Expectations:nnCandidates should have completed their 12th grade and possess a strong commitment to teamwork and customer service. Good communication skills are essential, as you will be interacting with passengers and colleagues daily. Flexibility in working hours is necessary, as this role may require working on weekends and holidays. A positive attitude and a willingness to learn are crucial for success in this position. nnIf you are eager to gain experience in the aviation industry and thrive in a dynamic environment, we encourage you to apply for this full-time position working from our office in Dehradun.

We are looking for enthusiastic individuals to join our team as Ground Staff in Varanasi. This full-time position is ideal for candidates with minimal experience who are eager to start their careers in the aviation industry.nnKey Responsibilities:nn1. Customer Service: Assist passengers with check-in, boarding, and luggage handling, ensuring a smooth and pleasant experience at the airport.nn2. Operational Support: Help maintain cleanliness and order in the terminal area, including checking and restocking supplies as needed.nn3. Communication: Collaborate effectively with team members and communicate with passengers regarding flight information and gate assignments.nn4. Safety Protocol: Follow safety and security procedures to ensure a secure environment for all passengers and staff.nnRequired Skills and Expectations:nnCandidates should have completed at least the 10th grade and possess good communication skills. A friendly and approachable demeanor is important for providing excellent customer service. Attention to detail and the ability to work in a fast-paced environment are essential, as you will interact with passengers and staff regularly. Flexibility in working hours is also expected, as airport operations often require varied shifts. A positive attitude and willingness to learn will contribute to your success in this role.

K9HR SOlUTIONS, Bansi Vanpariya (HR Manager - Mo. No. 90999 71251 Email ID : hr06@k9hr.com) is looking for Service Engineer to install, maintain, troubleshoot, and repair equipment and technical systems. The candidate will handle customer service calls, identify technical issues, perform preventive maintenance, provide on-site technical support, and ensure equipment operates efficiently. The role also involves preparing service reports, coordinating with customers and internal teams, and maintaining proper service records.

We are looking for dedicated and proactive individuals to join our team as Ground Staff in Kolkata. This is a full-time position suitable for those who have recently completed their 12th grade and are looking for their first job opportunity.nnKey Responsibilities:nn- Customer Assistance: Provide excellent service to passengers by helping them with check-in procedures, baggage handling, and general inquiries to ensure a smooth travel experience.n n- Operational Support: Assist in various operational tasks, including managing passenger flow, coordinating with other team members, and ensuring that all safety and security protocols are followed.n n- Communication: Maintain clear communication with passengers about flight information and any delays, ensuring that they are updated and well-informed throughout their travel experience.nnRequired Skills and Expectations:nnCandidates should have a positive attitude, strong communication skills, and the ability to work well in a team. A keen eye for detail is important, as accuracy in handling passenger information and operational tasks is crucial. Being punctual and reliable is essential, as is the capacity to handle challenging situations with composure. The role requires a commitment to delivering high-quality service in a fast-paced environment, making it ideal for those who thrive on interaction and teamwork.nFOR INFORMATION CONTACT - 9875598230

An Aircraft Maintenance Engineer (AME) is responsible for inspecting, maintaining, repairing, troubleshooting, and certifying aircraft to ensure they are safe, airworthy, and compliant with aviation regulations. The role involves carrying out scheduled and unscheduled maintenance on aircraft systems, engines, avionics, electrical components, hydraulic systems, landing gear, and structural components while adhering to the standards established by aviation authorities.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine, preventive, scheduled, and unscheduled aircraft maintenance.Conduct daily, transit, weekly, A-check, B-check, C-check, and heavy maintenance inspections.Inspect aircraft structures, fuselage, wings, landing gear, flight controls, and engines.Diagnose and rectify aircraft defects using approved maintenance procedures.Replace, repair, and overhaul defective aircraft components.Ensure all maintenance tasks are completed according to the Aircraft Maintenance Manual (AMM).Troubleshooting & RepairsIdentify mechanical, hydraulic, electrical, pneumatic, and avionics faults.Use specialized diagnostic tools and testing equipment.Repair aircraft systems while maintaining manufacturer specifications.Coordinate with engineering teams for complex technical issues.Perform functional tests after repairs to verify serviceability.Engine & Component MaintenanceInspect aircraft engines for wear, leaks, corrosion, and damage.Perform engine servicing, oil changes, filter replacement, and component inspections.Maintain propellers, Auxiliary Power Units (APU), and fuel systems.Monitor engine performance and recommend corrective actions.Avionics & Electrical SystemsInspect communication and navigation systems.Maintain radar, autopilot, cockpit instrumentation, and electrical wiring.Test aircraft electronic systems for operational reliability.Ensure compliance with avionics maintenance procedures.Documentation & ComplianceComplete maintenance logs, inspection reports, and defect records.Maintain aircraft technical documentation accurately.Ensure compliance with aviation regulatory authorities.Certify aircraft for return to service after maintenance (where appropriately licensed).Follow company maintenance policies and quality assurance procedures.Safety & Quality AssuranceFollow all aviation safety regulations and standard operating procedures.Maintain clean and organized work areas.Ensure proper use of Personal Protective Equipment (PPE).Report safety hazards and technical discrepancies immediately.Participate in safety audits and quality inspections.Team CoordinationWork closely with pilots, technicians, quality inspectors, and operations staff.Coordinate maintenance schedules with flight operations.Assist junior technicians with technical guidance and training.Participate in emergency aircraft recovery and AOG (Aircraft on Ground) support.Required QualificationsDiploma or Bachelor's Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Mechanical Engineering, or Aerospace Engineering.DGCA-approved AME qualification or equivalent aviation authority certification is preferred.Valid Aircraft Maintenance Engineer License (where applicable).Type rating on specific aircraft is an advantage.Relevant experience in aircraft maintenance is preferred.Required SkillsStrong knowledge of aircraft systems and maintenance procedures.Excellent troubleshooting and fault diagnosis skills.Knowledge of aviation regulations and airworthiness standards.Ability to interpret aircraft maintenance manuals and engineering drawings.Strong analytical and problem-solving abilities.Excellent attention to detail.Good communication and teamwork skills.Ability to work under pressure and meet strict deadlines.Computer proficiency in maintenance management software.Good technical documentation skills.Technical KnowledgeAircraft StructuresGas Turbine EnginesHydraulic SystemsPneumatic SystemsElectrical SystemsAvionics SystemsFlight Control SystemsLanding Gear SystemsFuel SystemsAircraft DocumentationMaintenance PlanningAircraft Safety StandardsPreferred CertificationsDGCA Aircraft Maintenance Engineer LicenseEASA Part-66 License (preferred internationally)ICAO-compliant aviation trainingHuman Factors TrainingSafety Management System (SMS) TrainingFuel Tank Safety TrainingEWIS (Electrical Wiring Interconnection System) TrainingAircraft Type Rating CertificationWorking ConditionsAirport hangars, maintenance bases, and line maintenance stations.Rotational shifts including nights, weekends, and public holidays.Outdoor work in varying weather conditions.Physically demanding work involving standing, climbing, bending, and lifting equipment.Exposure to aircraft noise, fuels, lubricants, and hydraulic fluids while following strict safety procedures.Salary Range (India)Fresher: 3.5 - 6 LPA2-5 Years: 6 - 10 LPA5-10 Years: 10 - 18 LPALicensed/Type-Rated AME: 15 - 30+ LPA (depending on airline, aircraft type, and experience)

Job for Electrical diploma holder candidateCandidate job profile :-As a Service Engineer with a specialization in Electrical Engineering, you responsible for maintaining and improving electrical systems. Your role will involve troubleshooting issues, performing regular maintenance, and ensuring systems operate efficiently and safely. This position requires on-site support, technical expertise, and strong problem-solving skills.ResponsibilitiesTroubleshoot and resolve electrical system issues.Perform regular maintenance and inspections of electrical systems.Ensure compliance with safety and regulatory standards.Collaborate with other engineers and technicians to improve efficiency.Document service and maintenance activities accurately.Provide on-site technical support as needed.Manage and prioritize a schedule of multiple service tasks.

As a CCTV Technician, you will provide reliable and advanced CCTV surveillance solutions to ensure safety in various settings, including malls, shopping complexes, jewelry showrooms, factory outlets, residential properties, and villas, primarily in the Gurgaon area.Key responsibilities include installing CCTV cameras at client locations, performing routine maintenance, and troubleshooting any issues that arise. You will be expected to conduct field visits as needed and ensure that systems are operational and in compliance with safety standards.To succeed in this role, you should possess strong technical skills, especially in CCTV installation and system maintenance. Attention to detail is crucial, along with the ability to work independently and as part of a team. Good communication and interpersonal skills are necessary for interacting with clients and understanding their surveillance needs. A valid driving license is required for fieldwork.This is a full-time position based in the Bhiwadi Alwar Road area. You will work from the office, with specific hours and days outlined by the employer. Candidates with 0 to 2 years of experience are encouraged to apply. A completed education at the 12th-grade level is required, and preference is given to male applicants for this position.

As a Mechanical Engineer, you will be involved in the design, analysis, and improvement of mechanical systems. You will work in a collaborative environment, contributing to various projects in Germany.Key Responsibilities:- Design Engineering: Create detailed designs for mechanical systems and components using CAD software. This includes developing specifications and ensuring designs meet project requirements.- Testing and Evaluation: Conduct testing on prototypes to assess their performance and efficiency. This involves analyzing results and making necessary adjustments to improve designs.- Project Collaboration: Work closely with cross-functional teams, including electrical engineers and product managers, to ensure seamless integration of all system components.- Problem Solving: Identify and troubleshoot issues in existing mechanical systems. Use analytical skills to develop effective solutions to enhance system performance.- Documentation: Maintain accurate documentation of design processes, changes, and test results. This ensures project transparency and compliance with industry standards.Required Skills and Expectations:You should have a Bachelors degree in Mechanical Engineering or a related field. Strong problem-solving abilities and analytical thinking are essential for this role. Proficiency in CAD software is important for design tasks. Good communication skills will help you collaborate effectively with team members. A foundational understanding of mechanical systems and a willingness to learn is expected. You should also be capable of working independently and managing your time efficiently to meet project deadlines.

An Aircraft Maintenance Engineer (AME) is responsible for inspecting, maintaining, repairing, troubleshooting, and certifying aircraft to ensure they are safe, airworthy, and compliant with aviation regulations. The role involves carrying out scheduled and unscheduled maintenance on aircraft systems, engines, avionics, electrical components, hydraulic systems, landing gear, and structural components while adhering to the standards established by aviation authorities.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine, preventive, scheduled, and unscheduled aircraft maintenance.Conduct daily, transit, weekly, A-check, B-check, C-check, and heavy maintenance inspections.Inspect aircraft structures, fuselage, wings, landing gear, flight controls, and engines.Diagnose and rectify aircraft defects using approved maintenance procedures.Replace, repair, and overhaul defective aircraft components.Ensure all maintenance tasks are completed according to the Aircraft Maintenance Manual (AMM).Troubleshooting & RepairsIdentify mechanical, hydraulic, electrical, pneumatic, and avionics faults.Use specialized diagnostic tools and testing equipment.Repair aircraft systems while maintaining manufacturer specifications.Coordinate with engineering teams for complex technical issues.Perform functional tests after repairs to verify serviceability.Engine & Component MaintenanceInspect aircraft engines for wear, leaks, corrosion, and damage.Perform engine servicing, oil changes, filter replacement, and component inspections.Maintain propellers, Auxiliary Power Units (APU), and fuel systems.Monitor engine performance and recommend corrective actions.Avionics & Electrical SystemsInspect communication and navigation systems.Maintain radar, autopilot, cockpit instrumentation, and electrical wiring.Test aircraft electronic systems for operational reliability.Ensure compliance with avionics maintenance procedures.Documentation & ComplianceComplete maintenance logs, inspection reports, and defect records.Maintain aircraft technical documentation accurately.Ensure compliance with aviation regulatory authorities.Certify aircraft for return to service after maintenance (where appropriately licensed).Follow company maintenance policies and quality assurance procedures.Safety & Quality AssuranceFollow all aviation safety regulations and standard operating procedures.Maintain clean and organized work areas.Ensure proper use of Personal Protective Equipment (PPE).Report safety hazards and technical discrepancies immediately.Participate in safety audits and quality inspections.Team CoordinationWork closely with pilots, technicians, quality inspectors, and operations staff.Coordinate maintenance schedules with flight operations.Assist junior technicians with technical guidance and training.Participate in emergency aircraft recovery and AOG (Aircraft on Ground) support.Required QualificationsDiploma or Bachelor's Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Mechanical Engineering, or Aerospace Engineering.DGCA-approved AME qualification or equivalent aviation authority certification is preferred.Valid Aircraft Maintenance Engineer License (where applicable).Type rating on specific aircraft is an advantage.Relevant experience in aircraft maintenance is preferred.Required SkillsStrong knowledge of aircraft systems and maintenance procedures.Excellent troubleshooting and fault diagnosis skills.Knowledge of aviation regulations and airworthiness standards.Ability to interpret aircraft maintenance manuals and engineering drawings.Strong analytical and problem-solving abilities.Excellent attention to detail.Good communication and teamwork skills.Ability to work under pressure and meet strict deadlines.Computer proficiency in maintenance management software.Good technical documentation skills.Technical KnowledgeAircraft StructuresGas Turbine EnginesHydraulic SystemsPneumatic SystemsElectrical SystemsAvionics SystemsFlight Control SystemsLanding Gear SystemsFuel SystemsAircraft DocumentationMaintenance PlanningAircraft Safety StandardsPreferred CertificationsDGCA Aircraft Maintenance Engineer LicenseEASA Part-66 License (preferred internationally)ICAO-compliant aviation trainingHuman Factors TrainingSafety Management System (SMS) TrainingFuel Tank Safety TrainingEWIS (Electrical Wiring Interconnection System) TrainingAircraft Type Rating CertificationWorking ConditionsAirport hangars, maintenance bases, and line maintenance stations.Rotational shifts including nights, weekends, and public holidays.Outdoor work in varying weather conditions.Physically demanding work involving standing, climbing, bending, and lifting equipment.Exposure to aircraft noise, fuels, lubricants, and hydraulic fluids while following strict safety procedures.Salary Range (India)Fresher: 3.5 - 6 LPA2-5 Years: 6 - 10 LPA5-10 Years: 10 - 18 LPALicensed/Type-Rated AME: 15 - 30+ LPA (depending on airline, aircraft type, and experience)

An Aircraft Maintenance Engineer (AME) is responsible for inspecting, maintaining, repairing, troubleshooting, and certifying aircraft to ensure they are safe, airworthy, and compliant with aviation regulations. The role involves carrying out scheduled and unscheduled maintenance on aircraft systems, engines, avionics, electrical components, hydraulic systems, landing gear, and structural components while adhering to the standards established by aviation authorities.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine, preventive, scheduled, and unscheduled aircraft maintenance.Conduct daily, transit, weekly, A-check, B-check, C-check, and heavy maintenance inspections.Inspect aircraft structures, fuselage, wings, landing gear, flight controls, and engines.Diagnose and rectify aircraft defects using approved maintenance procedures.Replace, repair, and overhaul defective aircraft components.Ensure all maintenance tasks are completed according to the Aircraft Maintenance Manual (AMM).Troubleshooting & RepairsIdentify mechanical, hydraulic, electrical, pneumatic, and avionics faults.Use specialized diagnostic tools and testing equipment.Repair aircraft systems while maintaining manufacturer specifications.Coordinate with engineering teams for complex technical issues.Perform functional tests after repairs to verify serviceability.Engine & Component MaintenanceInspect aircraft engines for wear, leaks, corrosion, and damage.Perform engine servicing, oil changes, filter replacement, and component inspections.Maintain propellers, Auxiliary Power Units (APU), and fuel systems.Monitor engine performance and recommend corrective actions.Avionics & Electrical SystemsInspect communication and navigation systems.Maintain radar, autopilot, cockpit instrumentation, and electrical wiring.Test aircraft electronic systems for operational reliability.Ensure compliance with avionics maintenance procedures.Documentation & ComplianceComplete maintenance logs, inspection reports, and defect records.Maintain aircraft technical documentation accurately.Ensure compliance with aviation regulatory authorities.Certify aircraft for return to service after maintenance (where appropriately licensed).Follow company maintenance policies and quality assurance procedures.Safety & Quality AssuranceFollow all aviation safety regulations and standard operating procedures.Maintain clean and organized work areas.Ensure proper use of Personal Protective Equipment (PPE).Report safety hazards and technical discrepancies immediately.Participate in safety audits and quality inspections.Team CoordinationWork closely with pilots, technicians, quality inspectors, and operations staff.Coordinate maintenance schedules with flight operations.Assist junior technicians with technical guidance and training.Participate in emergency aircraft recovery and AOG (Aircraft on Ground) support.Required QualificationsDiploma or Bachelor's Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Mechanical Engineering, or Aerospace Engineering.DGCA-approved AME qualification or equivalent aviation authority certification is preferred.Valid Aircraft Maintenance Engineer License (where applicable).Type rating on specific aircraft is an advantage.Relevant experience in aircraft maintenance is preferred.Required SkillsStrong knowledge of aircraft systems and maintenance procedures.Excellent troubleshooting and fault diagnosis skills.Knowledge of aviation regulations and airworthiness standards.Ability to interpret aircraft maintenance manuals and engineering drawings.Strong analytical and problem-solving abilities.Excellent attention to detail.Good communication and teamwork skills.Ability to work under pressure and meet strict deadlines.Computer proficiency in maintenance management software.Good technical documentation skills.Technical KnowledgeAircraft StructuresGas Turbine EnginesHydraulic SystemsPneumatic SystemsElectrical SystemsAvionics SystemsFlight Control SystemsLanding Gear SystemsFuel SystemsAircraft DocumentationMaintenance PlanningAircraft Safety StandardsPreferred CertificationsDGCA Aircraft Maintenance Engineer LicenseEASA Part-66 License (preferred internationally)ICAO-compliant aviation trainingHuman Factors TrainingSafety Management System (SMS) TrainingFuel Tank Safety TrainingEWIS (Electrical Wiring Interconnection System) TrainingAircraft Type Rating CertificationWorking ConditionsAirport hangars, maintenance bases, and line maintenance stations.Rotational shifts including nights, weekends, and public holidays.Outdoor work in varying weather conditions.Physically demanding work involving standing, climbing, bending, and lifting equipment.Exposure to aircraft noise, fuels, lubricants, and hydraulic fluids while following strict safety procedures.Salary Range (India)Fresher: 3.5 - 6 LPA2-5 Years: 6 - 10 LPA5-10 Years: 10 - 18 LPALicensed/Type-Rated AME: 15 - 30+ LPA (depending on airline, aircraft type, and experience)

We are looking for an Aircraft Maintenance Engineer to join our team in Surat. This position requires an individual with a keen eye for detail and a passion for aviation.Key Responsibilities:- Conduct Inspections: Regularly check aircraft systems and components to ensure they meet safety and performance standards.- Perform Maintenance: Execute scheduled maintenance tasks and repairs on aircraft, ensuring all work is compliant with regulations and procedures.- Troubleshoot Issues: Identify and diagnose potential problems in aircraft systems and components, applying effective solutions to ensure operational safety.- Keep Records: Maintain accurate documentation of inspections, maintenance, and repairs performed on each aircraft to comply with regulatory standards.- Collaborate with Teams: Work closely with pilots, ground crew, and other engineers to communicate needs and ensure the aircraft are ready for operation.Required Skills and Expectations:The ideal candidate should have a strong understanding of aircraft systems and maintenance procedures, along with problem-solving abilities. Good communication skills are essential for working with a team in a collaborative environment. A genuine interest in aviation technology and safety practices is crucial. Since this is an entry-level position, we welcome applications from recent graduates or individuals with up to six years of experience. Candidates should have at least completed their 12th grade education. A proactive attitude towards learning and adapting to new challenges in the aviation sector is expected.

We are seeking dedicated individuals to join our team as Ground Staff in Lucknow, India. This full-time position is ideal for those with a passion for customer service and a desire to contribute to operational excellence.nnKey Responsibilities:nn1. Passenger Assistance: Provide excellent service to passengers, helping with check-in, baggage handling, and inquiries to ensure a smooth travel experience.nn2. Baggage Management: Safely handle and manage passenger luggage, ensuring proper tracking and delivery to maintain efficiency and security.nn3. Team Support: Work closely with team members and other departments to coordinate ground operations, ensuring all tasks are completed effectively and on time.nn4. Safety Compliance: Adhere to safety protocols and regulations to create a secure environment for passengers and staff.nnRequired Skills and Expectations:nnCandidates should have completed their 10th grade education and possess 0 to 1 year of experience in a customer service role or similar environment. Strong communication skills and a friendly demeanor are essential for interacting with passengers. Individuals should demonstrate reliability, a positive attitude, and the ability to work as part of a team. Flexibility in adapting to changing situations and a commitment to upholding company standards are crucial. An inclination to solve problems and a willingness to learn will contribute to personal success in this role.

PXE Technologies is hiring CCTV Technicians for installation, configuration, servicing, and maintenance of CCTV surveillance systems and related security devices.Responsibilities: Installation and maintenance of CCTV cameras, DVR/NVR systems IP camera configuration and troubleshooting Cable laying and networking work Site visits for service and support Checking and resolving technical issues Coordination with project/site teamRequired Skills: Basic knowledge of CCTV systems and networking Experience in camera installation and troubleshooting Knowledge of DVR/NVR setup Ability to handle field work and site visits Basic communication skills

We are looking for a dedicated CCTV Technician to join our team in Delhi NCR. The ideal candidate will be responsible for the installation, maintenance, and troubleshooting of CCTV systems. This is a full-time position, and we welcome applicants with experience ranging from freshers to those with up to 6 years of experience. Key Responsibilities:- Installation of CCTV Cameras: You will install various types of CCTV cameras at designated locations, ensuring proper alignment and coverage for security monitoring.- System Configuration: This involves setting up and configuring CCTV systems, including DVRs/NVRs, to ensure they operate efficiently and meet client needs.- Maintenance and Repairs: Regular maintenance checks will be needed to keep systems functioning smoothly. You will also troubleshoot and repair issues as they arise.- User Training: You will provide training to users on how to operate CCTV systems effectively and understand the software involved.- Documentation: Keeping accurate records of installations, maintenance, and any repairs performed is essential for tracking system performance and future reference.Required Skills and Expectations:- A minimum educational qualification of 12th pass is required.- Basic understanding of electronic systems and technical troubleshooting is essential.- Strong communication skills to interact effectively with clients and team members.- Ability to work independently and as part of a team.- A willingness to learn new technologies and adapt to changing requirements.- Male candidates only, as this role may require physical installation tasks.

PXE Technologies is hiring CCTV Technicians, Installation Technicians, Cabling Technicians, and Helpers for project execution, installation, maintenance, and support activities in Bhiwadi and Gurgaon locations.Key Responsibilities: Installation and maintenance of CCTV cameras, DVRs, NVRs, and IP cameras. Network and power cable laying, routing, and dressing. Installation of access control, biometric attendance, and related security systems. Site survey and execution of project work. Troubleshooting and resolving technical issues at client locations. Assisting senior engineers during installation and maintenance activities. Testing and commissioning of installed systems. Following safety and quality standards during site work.

An Aircraft Maintenance Engineer (AME) is responsible for inspecting, maintaining, repairing, troubleshooting, and certifying aircraft to ensure they are safe, airworthy, and compliant with aviation regulations. The role involves carrying out scheduled and unscheduled maintenance on aircraft systems, engines, avionics, electrical components, hydraulic systems, landing gear, and structural components while adhering to the standards established by aviation authorities.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine, preventive, scheduled, and unscheduled aircraft maintenance.Conduct daily, transit, weekly, A-check, B-check, C-check, and heavy maintenance inspections.Inspect aircraft structures, fuselage, wings, landing gear, flight controls, and engines.Diagnose and rectify aircraft defects using approved maintenance procedures.Replace, repair, and overhaul defective aircraft components.Ensure all maintenance tasks are completed according to the Aircraft Maintenance Manual (AMM).Troubleshooting & RepairsIdentify mechanical, hydraulic, electrical, pneumatic, and avionics faults.Use specialized diagnostic tools and testing equipment.Repair aircraft systems while maintaining manufacturer specifications.Coordinate with engineering teams for complex technical issues.Perform functional tests after repairs to verify serviceability.Engine & Component MaintenanceInspect aircraft engines for wear, leaks, corrosion, and damage.Perform engine servicing, oil changes, filter replacement, and component inspections.Maintain propellers, Auxiliary Power Units (APU), and fuel systems.Monitor engine performance and recommend corrective actions.Avionics & Electrical SystemsInspect communication and navigation systems.Maintain radar, autopilot, cockpit instrumentation, and electrical wiring.Test aircraft electronic systems for operational reliability.Ensure compliance with avionics maintenance procedures.Documentation & ComplianceComplete maintenance logs, inspection reports, and defect records.Maintain aircraft technical documentation accurately.Ensure compliance with aviation regulatory authorities.Certify aircraft for return to service after maintenance (where appropriately licensed).Follow company maintenance policies and quality assurance procedures.Safety & Quality AssuranceFollow all aviation safety regulations and standard operating procedures.Maintain clean and organized work areas.Ensure proper use of Personal Protective Equipment (PPE).Report safety hazards and technical discrepancies immediately.Participate in safety audits and quality inspections.Team CoordinationWork closely with pilots, technicians, quality inspectors, and operations staff.Coordinate maintenance schedules with flight operations.Assist junior technicians with technical guidance and training.Participate in emergency aircraft recovery and AOG (Aircraft on Ground) support.Required QualificationsDiploma or Bachelor's Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Mechanical Engineering, or Aerospace Engineering.DGCA-approved AME qualification or equivalent aviation authority certification is preferred.Valid Aircraft Maintenance Engineer License (where applicable).Type rating on specific aircraft is an advantage.Relevant experience in aircraft maintenance is preferred.Required SkillsStrong knowledge of aircraft systems and maintenance procedures.Excellent troubleshooting and fault diagnosis skills.Knowledge of aviation regulations and airworthiness standards.Ability to interpret aircraft maintenance manuals and engineering drawings.Strong analytical and problem-solving abilities.Excellent attention to detail.Good communication and teamwork skills.Ability to work under pressure and meet strict deadlines.Computer proficiency in maintenance management software.Good technical documentation skills.Technical KnowledgeAircraft StructuresGas Turbine EnginesHydraulic SystemsPneumatic SystemsElectrical SystemsAvionics SystemsFlight Control SystemsLanding Gear SystemsFuel SystemsAircraft DocumentationMaintenance PlanningAircraft Safety StandardsPreferred CertificationsDGCA Aircraft Maintenance Engineer LicenseEASA Part-66 License (preferred internationally)ICAO-compliant aviation trainingHuman Factors TrainingSafety Management System (SMS) TrainingFuel Tank Safety TrainingEWIS (Electrical Wiring Interconnection System) TrainingAircraft Type Rating CertificationWorking ConditionsAirport hangars, maintenance bases, and line maintenance stations.Rotational shifts including nights, weekends, and public holidays.Outdoor work in varying weather conditions.Physically demanding work involving standing, climbing, bending, and lifting equipment.Exposure to aircraft noise, fuels, lubricants, and hydraulic fluids while following strict safety procedures.Salary Range (India)Fresher: 3.5 - 6 LPA2-5 Years: 6 - 10 LPA5-10 Years: 10 - 18 LPALicensed/Type-Rated AME: 15 - 30+ LPA (depending on airline, aircraft type, and experience)

An Aircraft Maintenance Engineer (AME) is responsible for inspecting, maintaining, repairing, troubleshooting, and certifying aircraft to ensure they are safe, airworthy, and compliant with aviation regulations. The role involves carrying out scheduled and unscheduled maintenance on aircraft systems, engines, avionics, electrical components, hydraulic systems, landing gear, and structural components while adhering to the standards established by aviation authorities.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine, preventive, scheduled, and unscheduled aircraft maintenance.Conduct daily, transit, weekly, A-check, B-check, C-check, and heavy maintenance inspections.Inspect aircraft structures, fuselage, wings, landing gear, flight controls, and engines.Diagnose and rectify aircraft defects using approved maintenance procedures.Replace, repair, and overhaul defective aircraft components.Ensure all maintenance tasks are completed according to the Aircraft Maintenance Manual (AMM).Troubleshooting & RepairsIdentify mechanical, hydraulic, electrical, pneumatic, and avionics faults.Use specialized diagnostic tools and testing equipment.Repair aircraft systems while maintaining manufacturer specifications.Coordinate with engineering teams for complex technical issues.Perform functional tests after repairs to verify serviceability.Engine & Component MaintenanceInspect aircraft engines for wear, leaks, corrosion, and damage.Perform engine servicing, oil changes, filter replacement, and component inspections.Maintain propellers, Auxiliary Power Units (APU), and fuel systems.Monitor engine performance and recommend corrective actions.Avionics & Electrical SystemsInspect communication and navigation systems.Maintain radar, autopilot, cockpit instrumentation, and electrical wiring.Test aircraft electronic systems for operational reliability.Ensure compliance with avionics maintenance procedures.Documentation & ComplianceComplete maintenance logs, inspection reports, and defect records.Maintain aircraft technical documentation accurately.Ensure compliance with aviation regulatory authorities.Certify aircraft for return to service after maintenance (where appropriately licensed).Follow company maintenance policies and quality assurance procedures.Safety & Quality AssuranceFollow all aviation safety regulations and standard operating procedures.Maintain clean and organized work areas.Ensure proper use of Personal Protective Equipment (PPE).Report safety hazards and technical discrepancies immediately.Participate in safety audits and quality inspections.Team CoordinationWork closely with pilots, technicians, quality inspectors, and operations staff.Coordinate maintenance schedules with flight operations.Assist junior technicians with technical guidance and training.Participate in emergency aircraft recovery and AOG (Aircraft on Ground) support.Required QualificationsDiploma or Bachelor's Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Mechanical Engineering, or Aerospace Engineering.DGCA-approved AME qualification or equivalent aviation authority certification is preferred.Valid Aircraft Maintenance Engineer License (where applicable).Type rating on specific aircraft is an advantage.Relevant experience in aircraft maintenance is preferred.Required SkillsStrong knowledge of aircraft systems and maintenance procedures.Excellent troubleshooting and fault diagnosis skills.Knowledge of aviation regulations and airworthiness standards.Ability to interpret aircraft maintenance manuals and engineering drawings.Strong analytical and problem-solving abilities.Excellent attention to detail.Good communication and teamwork skills.Ability to work under pressure and meet strict deadlines.Computer proficiency in maintenance management software.Good technical documentation skills.Technical KnowledgeAircraft StructuresGas Turbine EnginesHydraulic SystemsPneumatic SystemsElectrical SystemsAvionics SystemsFlight Control SystemsLanding Gear SystemsFuel SystemsAircraft DocumentationMaintenance PlanningAircraft Safety StandardsPreferred CertificationsDGCA Aircraft Maintenance Engineer LicenseEASA Part-66 License (preferred internationally)ICAO-compliant aviation trainingHuman Factors TrainingSafety Management System (SMS) TrainingFuel Tank Safety TrainingEWIS (Electrical Wiring Interconnection System) TrainingAircraft Type Rating CertificationWorking ConditionsAirport hangars, maintenance bases, and line maintenance stations.Rotational shifts including nights, weekends, and public holidays.Outdoor work in varying weather conditions.Physically demanding work involving standing, climbing, bending, and lifting equipment.Exposure to aircraft noise, fuels, lubricants, and hydraulic fluids while following strict safety procedures.Salary Range (India)Fresher: 3.5 - 6 LPA2-5 Years: 6 - 10 LPA5-10 Years: 10 - 18 LPALicensed/Type-Rated AME: 15 - 30+ LPA (depending on airline, aircraft type, and experience)

We are looking for an Aircraft Engineer to join our team in Mumbai. In this role, you will be responsible for ensuring the safety and efficiency of our aircraft operations. You will have the opportunity to work with experienced professionals and learn about aircraft systems and maintenance.Key Responsibilities:- Conduct Inspections: You will perform regular checks on aircraft to ensure they meet safety standards and are in good working condition.- Maintenance and Repairs: You will be responsible for diagnosing issues and carrying out repairs, ensuring that all work is completed according to regulations.- Documentation: Keeping accurate records of maintenance work and inspections is essential for compliance and safety checks.- Collaboration: You will work closely with other engineers and technicians to coordinate maintenance schedules and share knowledge.- Compliance with Standards: You will ensure all operations comply with aviation safety regulations and industry standards.Required Skills and Expectations:- A background in engineering is preferred, but a 12th-grade education is acceptable. - Strong problem-solving skills are essential for diagnosing aircraft issues effectively.- Attention to detail is crucial as aircraft maintenance requires precision and accuracy.- Basic knowledge of aircraft systems or willingness to learn is expected.- Strong communication skills are important for collaborating with team members and documenting inspections and repairs.- A proactive attitude towards safety and a desire to grow in the aviation field will be highly valued.

We are looking for enthusiastic individuals to join our team as Ground Staff in Kolkata. This entry-level position is perfect for someone eager to start a career in the aviation industry. Key Responsibilities: - Check-in Procedures: Assist passengers with check-in processes, including issuing boarding passes and managing luggage to ensure a smooth boarding experience. - Customer Service: Provide excellent assistance to passengers, resolving their queries and ensuring they have a pleasant airport experience. - Baggage Handling: Safely manage and transport luggage, ensuring it reaches the correct destination without delays. - Safety Protocols: Adhere to safety and security protocols to keep passengers and staff safe and maintain a secure environment. Required Skills and Expectations: Candidates should have completed at least the 10th grade and possess a genuine interest in customer service. Strong communication skills are essential to effectively interact with passengers and handle inquiries professionally. The ability to work in a team and stay calm under pressure is crucial, as the airport environment can be busy and fast-paced. Punctuality and reliability are expected, as you will be part of a system that relies on efficiency and teamwork. Previous experience is not necessary, making this a great opportunity for newcomers eager to learn and grow in the aviation field.

An Aircraft Maintenance Engineer (AME) is responsible for inspecting, maintaining, repairing, troubleshooting, and certifying aircraft to ensure they are safe, airworthy, and compliant with aviation regulations. The role involves carrying out scheduled and unscheduled maintenance on aircraft systems, engines, avionics, electrical components, hydraulic systems, landing gear, and structural components while adhering to the standards established by aviation authorities.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine, preventive, scheduled, and unscheduled aircraft maintenance.Conduct daily, transit, weekly, A-check, B-check, C-check, and heavy maintenance inspections.Inspect aircraft structures, fuselage, wings, landing gear, flight controls, and engines.Diagnose and rectify aircraft defects using approved maintenance procedures.Replace, repair, and overhaul defective aircraft components.Ensure all maintenance tasks are completed according to the Aircraft Maintenance Manual (AMM).Troubleshooting & RepairsIdentify mechanical, hydraulic, electrical, pneumatic, and avionics faults.Use specialized diagnostic tools and testing equipment.Repair aircraft systems while maintaining manufacturer specifications.Coordinate with engineering teams for complex technical issues.Perform functional tests after repairs to verify serviceability.Engine & Component MaintenanceInspect aircraft engines for wear, leaks, corrosion, and damage.Perform engine servicing, oil changes, filter replacement, and component inspections.Maintain propellers, Auxiliary Power Units (APU), and fuel systems.Monitor engine performance and recommend corrective actions.Avionics & Electrical SystemsInspect communication and navigation systems.Maintain radar, autopilot, cockpit instrumentation, and electrical wiring.Test aircraft electronic systems for operational reliability.Ensure compliance with avionics maintenance procedures.Documentation & ComplianceComplete maintenance logs, inspection reports, and defect records.Maintain aircraft technical documentation accurately.Ensure compliance with aviation regulatory authorities.Certify aircraft for return to service after maintenance (where appropriately licensed).Follow company maintenance policies and quality assurance procedures.Safety & Quality AssuranceFollow all aviation safety regulations and standard operating procedures.Maintain clean and organized work areas.Ensure proper use of Personal Protective Equipment (PPE).Report safety hazards and technical discrepancies immediately.Participate in safety audits and quality inspections.Team CoordinationWork closely with pilots, technicians, quality inspectors, and operations staff.Coordinate maintenance schedules with flight operations.Assist junior technicians with technical guidance and training.Participate in emergency aircraft recovery and AOG (Aircraft on Ground) support.Required QualificationsDiploma or Bachelor's Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Mechanical Engineering, or Aerospace Engineering.DGCA-approved AME qualification or equivalent aviation authority certification is preferred.Valid Aircraft Maintenance Engineer License (where applicable).Type rating on specific aircraft is an advantage.Relevant experience in aircraft maintenance is preferred.Required SkillsStrong knowledge of aircraft systems and maintenance procedures.Excellent troubleshooting and fault diagnosis skills.Knowledge of aviation regulations and airworthiness standards.Ability to interpret aircraft maintenance manuals and engineering drawings.Strong analytical and problem-solving abilities.Excellent attention to detail.Good communication and teamwork skills.Ability to work under pressure and meet strict deadlines.Computer proficiency in maintenance management software.Good technical documentation skills.Technical KnowledgeAircraft StructuresGas Turbine EnginesHydraulic SystemsPneumatic SystemsElectrical SystemsAvionics SystemsFlight Control SystemsLanding Gear SystemsFuel SystemsAircraft DocumentationMaintenance PlanningAircraft Safety StandardsPreferred CertificationsDGCA Aircraft Maintenance Engineer LicenseEASA Part-66 License (preferred internationally)ICAO-compliant aviation trainingHuman Factors TrainingSafety Management System (SMS) TrainingFuel Tank Safety TrainingEWIS (Electrical Wiring Interconnection System) TrainingAircraft Type Rating CertificationWorking ConditionsAirport hangars, maintenance bases, and line maintenance stations.Rotational shifts including nights, weekends, and public holidays.Outdoor work in varying weather conditions.Physically demanding work involving standing, climbing, bending, and lifting equipment.Exposure to aircraft noise, fuels, lubricants, and hydraulic fluids while following strict safety procedures.Salary Range (India)Fresher: 3.5 - 6 LPA2-5 Years: 6 - 10 LPA5-10 Years: 10 - 18 LPALicensed/Type-Rated AME: 15 - 30+ LPA (depending on airline, aircraft type, and experience)

We are urgently hiring Aircraft Maintenance Junior Engineers to support aircraft inspection, maintenance, troubleshooting, servicing, and repair activities at airports and aviation maintenance facilities. The selected candidates will work under authorized engineers and maintenance supervisors to ensure aircraft are maintained in accordance with approved maintenance procedures, safety standards, and regulatory requirements.Key ResponsibilitiesPerform routine and scheduled aircraft maintenance activities.Assist in inspection, servicing, troubleshooting, and repair of aircraft systems and components.Conduct visual inspections and identify defects, damage, leaks, or abnormal conditions.Assist licensed/certifying engineers during maintenance and rectification work.Carry out maintenance tasks according to approved Aircraft Maintenance Manuals (AMM), technical documentation, and company procedures.Assist with removal, installation, testing, and replacement of aircraft components.Perform basic troubleshooting of mechanical, electrical, hydraulic, pneumatic, and avionics systems as applicable.Maintain accurate maintenance records, work cards, inspection reports, and technical documentation.Ensure proper use and control of tools, ground support equipment, and maintenance equipment.Follow aircraft maintenance safety procedures and airport safety regulations.Ensure FOD prevention and maintain a clean and safe working environment.Report aircraft defects, technical issues, and unsafe conditions to the appropriate supervisor.Assist with aircraft turnaround and line maintenance activities when required.Support aircraft servicing activities, including relevant ground maintenance tasks.Follow company quality, safety, security, and compliance procedures.Participate in shift-based, night, weekend, and holiday duties as required.Coordinate with maintenance engineers, supervisors, operations, and other airport teams.Maintain confidentiality and proper handling of aircraft technical information.For Junior EngineersAssist senior/authorized engineers in aircraft maintenance and inspection.Review technical manuals and maintenance instructions before performing assigned tasks.Support troubleshooting and fault isolation activities.Assist in technical documentation and maintenance record preparation.Monitor maintenance activities for compliance with approved procedures.Develop practical knowledge of aircraft systems, maintenance practices, and aviation regulations.For Aircraft Maintenance TechniciansPerform assigned mechanical/electrical maintenance tasks under appropriate supervision.Inspect aircraft structures, components, and systems for defects.Remove and install aircraft components as authorized.Use maintenance tools and test equipment correctly.Assist with servicing, repair, inspection, and functional testing.Maintain tools and equipment in serviceable condition.Follow maintenance instructions and safety procedures at all times.Required QualificationsJunior Engineer:Diploma / Bachelor's degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Aerospace Engineering, Mechanical Engineering, Avionics, or a related field, depending on the employer's requirements.Relevant AME training/licensing or regulatory eligibility may be required for specific positions.Technician:ITI / Diploma / relevant technical qualification in Aircraft Maintenance, Aviation, Mechanical, Electrical, Electronics, or related discipline.Aircraft maintenance training or relevant aviation experience is an advantage.Preferred SkillsKnowledge of aircraft maintenance procedures and safety practices.Basic understanding of aircraft systems and components.Ability to read and understand technical manuals and maintenance documentation.Good troubleshooting and problem-solving skills.Strong attention to detail.Good mechanical/electrical aptitude.Ability to work effectively in a team.Good communication and reporting skills.Ability to work under time-sensitive airport operations.Willingness to work in shifts, including nights, weekends, and holidays.Strong commitment to aviation safety and quality standards.ExperienceFreshers: May be considered for trainee/junior positions subject to qualification and employer requirements.Experienced: Candidates with aircraft maintenance, MRO, airline, airport, line maintenance, or base maintenance experience may be preferred for experienced positions.Working ConditionsWork may be performed on aircraft stands, hangars, maintenance facilities, and airport operational areas.Candidates should be comfortable working outdoors and around aircraft and ground-support equipment.Shift duties may include early mornings, nights, weekends, and public holidays.The role may require standing, walking, climbing aircraft access equipment, and handling maintenance tools/equipment.Key CompetenciesTechnical Knowledge Aircraft Maintenance Troubleshooting Safety Awareness Quality Control Teamwork Attention to Detail Technical Documentation Problem Solving Time ManagementSalary & BenefitsSalary: As per company standards and candidate's qualification/experienceShift allowance may be applicable.Overtime and other benefits may be provided according to company policy.Training and career-development opportunities may be available.Statutory benefits may apply based on employer policy and applicable regulations.

We are urgently hiring Aircraft Maintenance Junior Engineers to support aircraft inspection, maintenance, troubleshooting, servicing, and repair activities at airports and aviation maintenance facilities. The selected candidates will work under authorized engineers and maintenance supervisors to ensure aircraft are maintained in accordance with approved maintenance procedures, safety standards, and regulatory requirements.Key ResponsibilitiesPerform routine and scheduled aircraft maintenance activities.Assist in inspection, servicing, troubleshooting, and repair of aircraft systems and components.Conduct visual inspections and identify defects, damage, leaks, or abnormal conditions.Assist licensed/certifying engineers during maintenance and rectification work.Carry out maintenance tasks according to approved Aircraft Maintenance Manuals (AMM), technical documentation, and company procedures.Assist with removal, installation, testing, and replacement of aircraft components.Perform basic troubleshooting of mechanical, electrical, hydraulic, pneumatic, and avionics systems as applicable.Maintain accurate maintenance records, work cards, inspection reports, and technical documentation.Ensure proper use and control of tools, ground support equipment, and maintenance equipment.Follow aircraft maintenance safety procedures and airport safety regulations.Ensure FOD prevention and maintain a clean and safe working environment.Report aircraft defects, technical issues, and unsafe conditions to the appropriate supervisor.Assist with aircraft turnaround and line maintenance activities when required.Support aircraft servicing activities, including relevant ground maintenance tasks.Follow company quality, safety, security, and compliance procedures.Participate in shift-based, night, weekend, and holiday duties as required.Coordinate with maintenance engineers, supervisors, operations, and other airport teams.Maintain confidentiality and proper handling of aircraft technical information.For Junior EngineersAssist senior/authorized engineers in aircraft maintenance and inspection.Review technical manuals and maintenance instructions before performing assigned tasks.Support troubleshooting and fault isolation activities.Assist in technical documentation and maintenance record preparation.Monitor maintenance activities for compliance with approved procedures.Develop practical knowledge of aircraft systems, maintenance practices, and aviation regulations.For Aircraft Maintenance TechniciansPerform assigned mechanical/electrical maintenance tasks under appropriate supervision.Inspect aircraft structures, components, and systems for defects.Remove and install aircraft components as authorized.Use maintenance tools and test equipment correctly.Assist with servicing, repair, inspection, and functional testing.Maintain tools and equipment in serviceable condition.Follow maintenance instructions and safety procedures at all times.Required QualificationsJunior Engineer:Diploma / Bachelor's degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Aerospace Engineering, Mechanical Engineering, Avionics, or a related field, depending on the employer's requirements.Relevant AME training/licensing or regulatory eligibility may be required for specific positions.Technician:ITI / Diploma / relevant technical qualification in Aircraft Maintenance, Aviation, Mechanical, Electrical, Electronics, or related discipline.Aircraft maintenance training or relevant aviation experience is an advantage.Preferred SkillsKnowledge of aircraft maintenance procedures and safety practices.Basic understanding of aircraft systems and components.Ability to read and understand technical manuals and maintenance documentation.Good troubleshooting and problem-solving skills.Strong attention to detail.Good mechanical/electrical aptitude.Ability to work effectively in a team.Good communication and reporting skills.Ability to work under time-sensitive airport operations.Willingness to work in shifts, including nights, weekends, and holidays.Strong commitment to aviation safety and quality standards.ExperienceFreshers: May be considered for trainee/junior positions subject to qualification and employer requirements.Experienced: Candidates with aircraft maintenance, MRO, airline, airport, line maintenance, or base maintenance experience may be preferred for experienced positions.Working ConditionsWork may be performed on aircraft stands, hangars, maintenance facilities, and airport operational areas.Candidates should be comfortable working outdoors and around aircraft and ground-support equipment.Shift duties may include early mornings, nights, weekends, and public holidays.The role may require standing, walking, climbing aircraft access equipment, and handling maintenance tools/equipment.Key CompetenciesTechnical Knowledge Aircraft Maintenance Troubleshooting Safety Awareness Quality Control Teamwork Attention to Detail Technical Documentation Problem Solving Time ManagementSalary & BenefitsSalary: As per company standards and candidate's qualification/experienceShift allowance may be applicable.Overtime and other benefits may be provided according to company policy.Training and career-development opportunities may be available.Statutory benefits may apply based on employer policy and applicable regulations.

Job for BE, BTech and Electrical diploma holder candidateCandidate job profile :-As a Service Engineer with a specialization in Electrical Engineering, you responsible for maintaining and improving electrical systems. Your role will involve troubleshooting issues, performing regular maintenance, and ensuring systems operate efficiently and safely. This position requires on-site support, technical expertise, and strong problem-solving skills.ResponsibilitiesTroubleshoot and resolve electrical system issues.Perform regular maintenance and inspections of electrical systems.Ensure compliance with safety and regulatory standards.Collaborate with other engineers and technicians to improve efficiency.Document service and maintenance activities accurately.Provide on-site technical support as needed.Manage and prioritize a schedule of multiple service tasks.

Job for Electrical diploma holder candidateCandidate job profile :-As a Service Engineer with a specialization in Electrical Engineering, you responsible for maintaining and improving electrical systems. Your role will involve troubleshooting issues, performing regular maintenance, and ensuring systems operate efficiently and safely. This position requires on-site support, technical expertise, and strong problem-solving skills.ResponsibilitiesTroubleshoot and resolve electrical system issues.Perform regular maintenance and inspections of electrical systems.Ensure compliance with safety and regulatory standards.Collaborate with other engineers and technicians to improve efficiency.Document service and maintenance activities accurately.Provide on-site technical support as needed.Manage and prioritize a schedule of multiple service tasks.

Job for Electrical diploma holder candidateCandidate job profile :-As a Service Engineer with a specialization in Electrical Engineering, you responsible for maintaining and improving electrical systems. Your role will involve troubleshooting issues, performing regular maintenance, and ensuring systems operate efficiently and safely. This position requires on-site support, technical expertise, and strong problem-solving skills.ResponsibilitiesTroubleshoot and resolve electrical system issues.Perform regular maintenance and inspections of electrical systems.Ensure compliance with safety and regulatory standards.Collaborate with other engineers and technicians to improve efficiency.Document service and maintenance activities accurately.Provide on-site technical support as needed.Manage and prioritize a schedule of multiple service tasks.

We are seeking dedicated individuals to join our team as Ground Staff in Kolkata, India. This full-time position is ideal for those looking to start their careers in the aviation sector. A minimum education of 12th grade is required, and no prior experience is necessary. Key Responsibilities:1. Customer Service: Greet passengers courteously, assist with check-in processes, and address any queries they may have to ensure a pleasant travel experience.2. Baggage Handling: Safely load and unload baggage, keeping track of all items to avoid loss or damage. 3. Safety Compliance: Follow all safety regulations and procedures diligently to ensure the safety of passengers and staff at all times.4. Team Collaboration: Work effectively with fellow team members and other departments to ensure the smooth operation of daily airport activities.Required Skills and Expectations:Candidates must possess strong communication skills to interact effectively with passengers. Good organizational abilities are essential for managing tasks efficiently in a fast-paced environment. A flexible attitude and willingness to work varied shifts, including weekends and holidays, are expected. Additionally, candidates should show a commitment to providing excellent service and a desire to learn and grow within the aviation industry. Strong attention to detail and the ability to work under pressure are also important for this role.

We are seeking enthusiastic Ground Staff to join our team in Kolkata. This entry-level position is ideal for individuals who are detail-oriented and enjoy working in a dynamic environment. Key Responsibilities:1. Check-In Assistance: You will help passengers with the check-in process, ensuring a smooth and efficient experience from the moment they arrive at the airport. This includes verifying tickets and issuing boarding passes.2. Baggage Handling: Your role will involve managing passengers

As an Assistant AC Technician, your responsibilities will include:- Installing, maintaining, and repairing air conditioning systems- Diagnosing and troubleshooting issues with AC units- Conducting regular inspections to ensure efficient functioning of the equipment- Cleaning and replacing air filters as needed- Performing routine maintenance tasks to prevent breakdowns- Ensuring compliance with safety standards and regulations- Keeping accurate records of work performed and parts used- Providing excellent customer service and addressing any concerns or questions that may arise

Major Roles & Responsibilities Assist cardiologists during cardiac catheterization and interventional proceduresPrepare and position patients for Cath Lab proceduresOperate and maintain Cath Lab equipment and monitoring systemsEnsure proper sterilization and infection control protocolsMonitor patient vitals and report changes during proceduresPrepare contrast media, catheters, and surgical instrumentsMaintain accurate patient records and procedure documentationFollow radiation safety, hospital policies, and clinical standards

Design and Development:Create and develop electrical systems, components, and products, ensuring they meet specifications and standards.Use computer-aided design (CAD) software to create schematics and layouts.Testing and Evaluation:Conduct testing of electrical systems and components to ensure functionality and compliance with safety regulations.Analyze test data and troubleshoot issues to improve designs.Project Management:Plan and oversee engineering projects, ensuring they are completed on time and within budget.Coordinate with other engineers and departments to ensure project alignment.Research and Innovation:Stay abreast of advancements in electrical engineering and technology to integrate innovative solutions into projects.Conduct research to develop new methodologies or improve existing processes.Compliance and Standards:Ensure that all electrical designs and systems comply with relevant German and European regulations and standards.Participate in the certification processes for products and systems.Collaboration and Communication:Work closely with multidisciplinary teams, including mechanical engineers, software developers, and project managers.Communicate technical information clearly to non-engineering stakeholders.Maintenance and Support:Provide technical support for electrical systems and equipment, troubleshooting issues as they arise.Develop maintenance procedures and schedules for electrical infrastructure.Documentation:Create and maintain detailed documentation of design processes, test results, and project updates.Prepare technical reports and presentations for stakeholders and clients.

Indigo Airlines jobs ground staff available.Full time job available apply fast and joinNow we are hiring for indigo AirlinesIndigo Airlines near by jobs available apply fast and join usFreshers apply fast and join us indigo Airlines urgent hiring1. Manager. 650002.Supervisor . 420003. Driver . 350004.Helper. 220005. Guard .250006. Ticket excutive ,380007. Passport checker. 420008. Cash Counter executive. 450009. Lodder. 2500010. Ramp assistant. 3500011. Cargo executive. 32000All facilities like PF, ESI, INSURANCE, CAB AND ACCOMODATION provide to selected candidates.Indigo Airlines vacancyGround Staff and Security line.JOB LOCATION:Nearest Airport in Home LocationAll Domestic/International Airports.COMMUNICATION SKILL:Candidates Good Communication Skill, Good Personality.LANGUAGE KNOWN:Hindi, English Language.AGE LIMIT:Driver: 18 to 54 Years.Ground Staff : 18 to 42 Years.Security Staff:18 to 42 Years.DRIVER (150) POSTLocation. Near by Airport availableApply fast and join usCall HRView

Indigo Airlines jobs ground staff available.Full time job available apply fast and joinNow we are hiring for indigo AirlinesIndigo Airlines near by jobs available apply fast and join usFreshers apply fast and join us indigo Airlines urgent hiring1. Manager. 650002.Supervisor . 420003. Driver . 350004.Helper. 220005. Guard .250006. Ticket excutive ,380007. Passport checker. 420008. Cash Counter executive. 450009. Lodder. 2500010. Ramp assistant. 3500011. Cargo executive. 32000All facilities like PF, ESI, INSURANCE, CAB AND ACCOMODATION provide to selected candidates.Indigo Airlines vacancyGround Staff and Security line.JOB LOCATION:Nearest Airport in Home LocationAll Domestic/International Airports.COMMUNICATION SKILL:Candidates Good Communication Skill, Good Personality.LANGUAGE KNOWN:Hindi, English Language.AGE LIMIT:Driver: 18 to 54 Years.Ground Staff : 18 to 42 Years.Security Staff:18 to 42 Years.DRIVER (150) POSTLocation. Near by Airport availableApply fast and join usCall HR

Indigo Airlines jobs ground staff available.Full time job available apply fast and joinNow we are hiring for indigo AirlinesIndigo Airlines near by jobs available apply fast and join usFreshers apply fast and join us indigo Airlines urgent hiring1. Manager. 650002.Supervisor . 420003. Driver . 350004.Helper. 220005. Guard .250006. Ticket excutive ,380007. Passport checker. 420008. Cash Counter executive. 450009. Lodder. 2500010. Ramp assistant. 3500011. Cargo executive. 32000All facilities like PF, ESI, INSURANCE, CAB AND ACCOMMODATION provide to selected candidates.Indigo Airlines vacancyGround Staff and Security line.JOB LOCATION:Nearest Airport in Home LocationAll Domestic/International Airports.COMMUNICATION SKILL:Candidates Good Communication Skill, Good Personality.LANGUAGE KNOWN:Hindi, English Language.AGE LIMIT:Driver: 18 to 54 Years.Ground Staff : 18 to 42 Years.Security Staff:18 to 42 Years.DRIVER (150) POSTLocation. Near by Airport availableApply fast and join usCall HR