Engineering Job Vacancies in Raigarh

Responsibilities:Ensure that keys, materials, and required equipment are in good working condition and sufficient for the day's job.Provide technical support to helpers.Demonstrate expertise in working alone or with a team as required.Before starting a job, ensure the supervisor possesses the written permit for that specific job and area at that particular time; refusal to start the job is not allowed without proper authorization.Perform primary labelling. Conduct final labelling, either direct or indirect, with a suitable back sheet according to company guidelines and training provided by the supervisor.Tasks may include drilling, grouting, grinding, civil work, and other site/company-related activities as briefed by the supervisor or Project Engineer. Wear Personal Protective Equipment (PPE) while performing tasks.Maintain general 5S, housekeeping, and cleanliness at the workstation and workplace during Execution.Ensure proper care of stairs, tools, tackles, and other company assets. Be prepared to work overtime or on Sundays as needed, with proper intimation from the supervisor.Ensure quality execution, focusing on level/stint, prevention of air bubbles, surface preparation, edge sealing, and aesthetics.Follow all the safety guidelines provided by the customer and Brigs, as briefed by the supervisor.Maintain a professional demeanour and good behaviour during duty hours. Achieve the daily targets set by the supervisor.Facilitate all required tools and tackles at the work area, including stairs and soap water.Acquire knowledge of different applications and decide on execution methods for increased effectiveness and accuracy, contributing to the pace of execution.Perform crucial tasks with strict adherence to safety requirements.Strictly follow the leadership of the supervisor; in case of problems or concerns, consult with a supervisorKey Performance Expectations and Behavioural Requirements:Avoid unplanned leave.Ensure timely arrival at the site.Prevent damage to tools and tackles due to negligence (memo issued by the supervisor).Avoid abusive behaviour, unwanted confrontation, and misconduct.Comply with document requirements: ID card, photo, visiting pass, work permit, gate pass, etc.Follow basic safety practices and manage PPE (helmet, shoes, etc.); loss of pay for the day for non-compliance.Use polite, respectful, and measured words when interacting with clientsEligibility: 10th + 12th + ITI (Civil, Mechanical, Fitter, Welder)

Job Title: Transmission Line SurveyorCompany Name: Jaidada Eng. & Techno Survey Location: Various Locations Across IndiaJob Type: Full-TimeExperience Level: Entry-Level / Mid-Level / Senior-Level (Specify as per your requirement)Application Deadline: [Insert Deadline Date]About Us[Your Company Name] is a leading transmission survey company specializing in high-quality transmission line surveys across India. We pride ourselves on delivering accurate, efficient, and reliable survey services to support the development of critical infrastructure projects. Our team works in diverse terrains and locations, ensuring excellence in every project we undertake.We are looking for dedicated, hardworking, and skilled individuals to join our dynamic team and contribute to our mission of building a stronger, connected India.Job DescriptionAs a Transmission Line Surveyor at Jaidada Eng. & Techno Survey , you will be responsible for conducting surveys for transmission line projects in various parts of India. This role requires fieldwork, attention to detail, and adherence to company guidelines to ensure the successful completion of projects.Key Responsibilities:Conduct detailed surveys for transmission line projects, including route surveys, topographic surveys, and other related tasks.Use surveying tools and equipment provided by the company with care and responsibility.Collaborate with team members, including seniors, to ensure project goals are met.Follow all instructions and guidelines provided by the company to maintain quality and safety standards.Prepare accurate reports and documentation as required.Travel to various project locations across India as per project requirements.Skills and QualificationsDiploma or Degree in Civil Engineering, Surveying, or a related field (preferred but not mandatory, depending on experience).Experience in transmission line surveys or similar fieldwork (preferred but freshers may also apply).Knowledge of surveying tools and techniques (e.g., Total Station, GPS, etc.).Ability to work in challenging terrains and weather conditions.Strong communication and teamwork skills.Willingness to travel and work in various locations across India.Company Rules and ExpectationsAt [Your Company Name], we value professionalism, respect, and responsibility. Candidates are expected to adhere to the following company rules:Care for Company Resources: Handle tools, equipment, and resources provided by the company or partner organizations with utmost care and responsibility.Respect for Seniors and Team Members: Treat seniors, colleagues, and team members with respect and maintain a positive working environment.Adherence to Instructions: Follow all instructions, guidelines, and safety protocols provided by the company to ensure project success and personal safety.Commitment to Quality: Deliver high-quality work and maintain professionalism in all tasks.What We OfferCompetitive salary and benefits package.Opportunities for career growth and skill development.A supportive and respectful work environment.Travel allowances and accommodation (as per company policy) for fieldwork.Job receipt provided upon joining as proof of employment (details below).

Technical Support Engineer

Graduate Engineer Trainee (Raigarh, Chhattisgarh)Scania Steels and Power Limited, an integrated steel plant, seeks a Graduate Engineer Trainee. You will assist senior engineers in power generation projects, operations, and maintenance within a steel manufacturing environment. Requires a Bachelor's in Mechanical/Electrical Engineering, strong analytical skills, and interest in sustainable energy. Competitive salary and benefits. Contact: 7898004254

our company are hiring some mining engineer for our iron/ore and coal mine project. As a mining and geological engineer, locates, extracts, and transports natural resources from under the Earth's surface. They work with mining and mineral extraction companies, coordinating their activities within mine sites.

Online co-commerc company distributorship as a work

We have vacant of 53 Software Engineer Jobs in Jabalpur,Bilaspur, Chhattisgarh,Kanpur,odisha,Mysore Banglore Highway,Satna,Panna,Raigarh, Chhattisgarh,Dhanbad,Ranchi, for Freshers Educational Qualification : B.A, B.C.A, B.Com, B.Sc, B.E, B.Tech, MBBS, Post Graduate Diploma, M.C.A, M.Sc Skill React Js,Software Project Management,Nodejs,Advanced Java,PHP,Algorithms,Python,Object Oriented Programming,Mysql etc.

riliyaw582@aiworldx.comWe are looking for 52 WeView Limitec ApplicantsExecutive Posts Jhansi, Gwalior,chattisgarh, Kanpur, Ranchi, Hyderaba Chhattisgarh, Katni, Fatehpur, Nagpur, with deep knowledge in Web Analyzer, Sales Administration, Team Calling, Trainer, Software Building, Sales, Cold Sales, Website Educational Developer and Required Qualification is B.A, B.C.A, B.Com, B.Ed, B.Sc, B.Tech, MBBS, Post Graduate Diploma, M.A, M.Sc

Job Openings for 52 Software Executive Jobs for Freshers in Raipur, Chhattisgarh,Janjgir-Champa, Chhattisgarh,Rajnandgaon, Chhattisgarh,Bemetra, Chhattisgarh,Bilaspur, Chhattisgarh,Korba, Chhattisgarh,Raigarh, Chhattisgarh,Balarampur,Dantewada, Chhattisgarh,Sakti, Janjgir-Champa, having Educational qualification of : Diploma, B.A, B.C.A, B.Com, B.Sc, B.Tech, Post Graduate Diploma, M.C.A, M.B.A/PGDM, M.Sc with Good knowledge in Soft Skills,Software Dev Analyst,Salesforce Com Developer,Information Technology,AI Developer,Business Process Re-engineering,Business Planning,Service Marketing etc.

Candidate will be responsible for Managing and expanding company data base in the assigned territory. The day to day activity involve identify new opportunities, maintain good relationship with existing customer, handling enquiry, providing technical support, Product demonstration and generate business.

Hiring for 1 civil engineer Job in , with minimum 5 Years Experience,Required Educational Qualification is : Diploma, B.Tech/B.E with Good knowledge in Site Execution,Building Construction etc.

Design and test parts for moving vehicles.Design, manufacture, and operate engineering subsystems.Engineer attributes of an automobile.Produce visual interpretations of automobiles and their parts.Select materials for production.Use mechanical, thermodynamic, pneumatic, hydraulic and electrical principles to resolve engineering problems.Research designs and past machinery.Build prototypes.Develop test procedures and test moving vehicles.Supervise the process of manufacturing, installation, and operation of vehicles.Inspect vehicle for defects.Investigate mechanical failures.Select and purchase appropriate materials.Prepare cost and timing estimates.Supervise technicians and technologists.Review, change, and approve designs.Test drive vehicles and check for faults.Specify functional requirements during development phase.Integrate components into the final design.Evaluate the effectiveness of the design and change if necessary.Estimate cost, reliability, and safety factors.Test products thoroughly for safety issues and defects.Use computers extensively to produce and analyze designs.Generate specifications for parts.Control the efficiency of processes

We are looking for an innovative Mining Engineer to join our organization. In this position, you will oversee and develop production systems in our Coal and iron ore mine. Engineering knowledge, great attention to detail, and the ability to optimize production processes for maximum efficiency. Mining engineers provide support to and manage mining operations, create estimates for mining projects, design mines, and assist with mining equipment selection. They are primarily hired by mining companies and conglomerates to work full-time shifts, usually during daytime business hours.

Travel between sites. Another responsibility you may have as a civil site engineer is the duty of travelling between construction sites. ...Enforce safety protocols. ...Quality assurance. ...Solve technical issues. ...Problem-solving. ...Time management. ...Communication. ...Project management.Ensure that projects are completed timely and cost effectively following engineering standards and city specifications. Negotiate, manage, and prepare compensation for contractors engaged in City contracts. Prepare and review plans and check construction for conformance with standards and specifications.

Requirement for Scada Developer in Schneider Software

We are looking for Mechanical Maintenance Engineer,who has experience in power plant equipments like boilers,turbine,fans,compressors,CHP, AHP, preventive maintenance,shutdown jobs etc.,we have openings in Andhra Pradesh, Odisha,West Bengal and Chattisgrah locations

Position Electrical shift incharge ( sponge iron unit )Location - Raigarh chhattisgarhSalary - 25000 to 30000Experience - 4 +yearQualification Diploma / B.E in electricalRole & ResponsibilitiesShift Supervision:Supervise and lead the electrical team during assigned shifts, ensuring smooth operations and adherence to safety protocols.Equipment Operation and Maintenance:Oversee the operation and maintenance of electrical equipment, including but not limited to transformers, switchgear, motors, and control systems within the sponge iron manufacturing unit.Troubleshooting:Conduct troubleshooting and diagnostic assessments of electrical systems to identify and rectify faults, minimizing downtime and ensuring continuous production.Preventive Maintenance:Implement and manage preventive maintenance schedules for electrical equipment, ensuring optimal performance and longevity.Safety Compliance:Enforce safety procedures and guidelines, promoting a culture of safety among the electrical team. Conduct regular safety audits and implement corrective actions.Coordination with Other Departments:Collaborate with mechanical, production, and quality control teams to ensure seamless coordination and communication for effective production processes.Emergency Response:Lead the electrical team in responding to emergency situations, including power outages, equipment failures, and other critical incidents. Implement contingency plans to minimize disruptions.Documentation:Maintain accurate records of electrical maintenance activities, equipment performance, and incident reports. Prepare shift reports detailing activities and issues.Training and Development:Conduct training sessions for the electrical team to enhance technical skills and ensure a high level of competency. Stay updated on industry advancements and share knowledge with the team.Energy Efficiency:Implement measures to enhance energy efficiency, reduce power consume

Job Openings for 1 Installation Technician (GPS INSTALLATION ENGINEER/TECHNITIAN) Job for EXPERIENCED in Raigarh, Chhattisgarh, Drilling Machine, Installation Maintenance, AC Installer, CCTV Technician, TECHNICIAN, having Educational qualification of : Higher Secondary, Secondary School with Good knowledge in Drilling Machine, Installation Maintenance, AC Installer, CCTV Technician, TECHNICIAN etc.,

We are looking to hire an experienced Costing and Estimation Engineer to determine costs of various electrical installations. You should also be able to identify ways to continuously improve cost-estimating procedures to reduce inconsistencies between estimated and actual project costs. Carefully review Purchase Order/ Tender / RFP document to understand specific requirements of the project , Performing Estimation & Costing of LT Panels, Tap-Off Boxes, APFC Panels, AMF Panels, Meter Boards Indoor / Outdoor Type Panels Calculation of bill of material (BOM) & estimation & costing of electrical panelsStudy the PID (Process & Instrumentation Diagram) prepared by Process/ Project team and recommend improvement Costing of all types of LT Panels such as MCC PCC AMF APFC etc. Studying BOQs and Single Line Diagrams Studying Technical Specifications of various Switch gears and Bus bars Estimating the cost of bus bar required in the panel Prepare bill of material as per client requirements Technical Specifications of various Switch gears and Bus bars Design of Electrical panel like PCC,MCC,APFC,PDB and control panel based on CPRI & IEC 61439 & other local / international standards for LT panel design. Coordination with the client regarding queries Prepare Panel GA & BOQ & get approval of panel GA from client/ consultant as & when required. Prepare wiring drawing & get approval of from client/ consultant as & when required Follow up with purchase & suppliers for timely delivery for allotted project Prepare final as built wiring drawings for Panels ready to dispatch. Should have Proficiency AUTOCAD Electric Proficiency in EPLAN is an added advantage

We are looking to hire a skilled maintenance engineer to install and maintain industrial equipment for our clients. As a maintenance engineer, you will be required to install new equipment, conduct routine maintenance, and troubleshoot equipment faults on site.

We are looking for a well-organized site engineer with strong leadership skills to join our growing team. The site engineer's responsibilities include managing different parts of construction projects, supervising crew members, preparing estimates for time and material costs, completing quality assurance, observing health and safety standards,Key skill-Preparing, scheduling, coordinating and monitoring the assigned engineering projectsMonitoring compliance to applicable codes, practices, QA/QC policies, performance standards and specificationsInteracting daily with the clients to interpret their needs and requirements and representing them in the field

We are Urgently Looking for Plc Programmer.