Embedded Programmer Graduate Experience Jobs in Bangalore

Hiring: AUTOSAR Engineer Location: Bangalore Experience: 7-9 YearsWe are looking for an experienced AUTOSAR Engineer to develop, configure, and integrate automotive software components for embedded systems used in modern vehicles.Key Responsibilities:Develop and configure AUTOSAR Classic Platform software components.Work on BSW, RTE, MCAL, and ECU integration.Develop and integrate software using AUTOSAR architecture.Perform debugging, testing, and troubleshooting of embedded software.Collaborate with hardware, system, and validation teams.Ensure compliance with automotive software standards and project requirements.Support software integration, verification, and release activities.Key Skills: AUTOSAR, Embedded C, C/C++, BSW, RTE, MCAL, ECU Integration, CAN, LIN, UDS, Vector Tools, Automotive Software Development

We are seeking an experienced Hardware Design Engineer to design, develop, and validate electronic hardware solutions for aerospace and defence applications. The ideal candidate should have expertise in schematic design, PCB layout, analog and power electronics, FPGA/microcontroller integration, EMI/EMC compliance, and product validation. Experience with aerospace quality standards and cross-functional collaboration is preferred.

Role: Embedded Firmware EngineerJob Type: Full-timeExperience: 2-3 yearsWe are hiring an Embedded Firmware Engineer with 2-3 years of experience to work on advanced Ambarella-based camera platforms. This role involves developing firmware from scratch and enabling next-generation features like wireless connectivity, sensor integration, and edge AI capabilities.Key ResponsibilitiesBuild and develop firmware from scratch for Ambarella-based camera systemsEnable and optimize features such as WiFi, Bluetooth, 4G/LTE, and GPSPerform driver-level programming and hardware bring-upIntegrate and manage 9-axis IMU sensors (accelerometer, gyroscope, compass)Develop and maintain Linux-based embedded systemsCollaborate with hardware teams for debugging and system optimizationDeploy and optimize edge AI models on embedded platformsEnsure firmware performance, reliability, and scalabilityRequired Skills2-3 years of experience in embedded systems developmentHands-on experience with Ambarella SoCsStrong knowledge of Embedded LinuxExperience in driver development and kernel-level programmingProficiency in C/C++ programmingExperience with WiFi, Bluetooth, 4G, and GPS integrationFamiliarity with sensor integration (IMU systems)Understanding of Edge AI deploymentPreferred SkillsExperience in camera firmware developmentKnowledge of ICB architectureFamiliarity with multimedia/video pipelinesExperience with debugging and performance optimization toolsBenefitsWork on cutting-edge embedded and AI technologiesOpportunity to grow in a fast-paced environmentCollaborative and innovation-driven culture

Linux Device Driver ProgrammerWork Arrangement: On-siteSchedule: Day ShiftLocation: Bangalore, IndiaEmployment Type: Full timeSalary: Rs. 2,000,000 to Rs. 3,000,000About the Role:We are looking for highly skilled Linux Device Driver Programmers to join our team. You will be responsible for developing, maintaining, and optimizing Linux kernel modules and device drivers. This role demands strong C programming expertise, hands-on Linux kernel/user space experience, and the ability to work in X86 multi-core processor environments.Key Responsibilities: Develop and maintain Linux device drivers and kernel modules Perform kernel and user space programming for various hardware interfaces Work with X86 multi-core processor environments Write, debug, and optimize C code, shell scripts, and makefiles Collaborate with hardware and software teams to ensure seamless driver integrationMust Have: Strong C programming skills Hands-on Linux device driver or kernel module development experience Proficiency in Linux kernel and user space programming Experience in developing device drivers with a solid understanding of the Linux device model and driver framework Experience with X86 multi-core processor environments Knowledge of shell scripting and makefilesGood to Have: Knowledge of PCIe and Ethernet protocols Experience with PCIe device drivers Understanding of SR-IOV and hardware virtualization Knowledge of hypervisors and virtual machine monitors (VMM) Familiarity with GTest unit testing framework Experience with tools like JIRA, RTC, and VirtualBox Awareness of the project life cycle and Agile methodologies such as SAFeQualifications: 5 - 9 years of industry experience, with at least 2 years of relevant experience in Linux device driver programming Bachelors degree in Computer Science, Electronics, or related field (or equivalent experience)Designation: Member Engineering StaffRole: PCIe & Network Device Driver ProgrammingFunctional Area: Engineering HardwareCandidates with attached CV and relevant experience will be considered for a phone interview.

Design parts of embedded software for Automotive drive systems or Industrial Valve systems which includes Brushless DC, Stepper or DC Motors Design parts of embedded software with wired communication stacks likes LIN, SPI, I2C, SENT, CAN, PWM, UART or wireless stacks like Lorawan,BLE and Others Implementation of hardware oriented C/C++ code for microcontrollers (ARM, 8051, dsPIC) Creating of software documentations suitable for automotive customers Close cooperation with software test, hardware development and system engineering Reviewing of software test specifications (unit and integration test) and support of software testing Supporting and guiding junior designers.

Roles and Responsibilities:Must to have: BPC Embedded with Fox code and AMDP planning functions1. 8+ years of functional experience in BPC Embedded with Fox code and AMDP planning functions2. Minimum 3 implementation experience out of which at least 1 manufacturing domain.3. The experience on BPC embedded version for S4 HANA 2020 required.4. Finance planning domain experience .5. Good customer facing skills require

looking for software engineers in Battery Management System for Automotive domain.Searching for battery control Software design engineers for EV vehicle.Candidate have both design and development skill in embedded software development.Should have practical experience in requirement specification analysis, design, prototyping and testing.3 to 6 years of experience in embedded software design and developmentExperience in model-based development by using MATLAB Simulink and state flowExperience in MBD code generation by using embedded coderExperience in MIL and SILHas experience in AUTOSAR architecture and AUTOSAR block sets in MATLB.Has experience in automotive software development with functional safety development process. (Familiarity with ISO 26262, PART6 is desirable)Can analyze customer specification and prepare software requirement specification.Can do software design and do documenting using UML diagrams (Block diagram, Sequence diagram, State machine, State transition diagram, Data flow diagram)Can do software design and code review based on quality and safety process checklists

Job Details :- knowledge of Hardware Design & Development with experience of 3 - 5 years. - Experience with Analog, Digital and mixed signal circuit design. - Knowledge of Micro-Controller architectures and its interfacing. - Ability to design circuits, perform design calculations and simulations. - Microprocessor / Controller Experience - TI, NXP, Renesas & STM32 Micro-controllers. - Hands-on experience with communication protocols like CAN, I2C, SPI and RS-485. - RF, Analog, DAC. - Wired Connectivity Ethernet, USB etc. - Test and Debug (skill using emulators and debugger) Board Bring Up, Interface testing, Level zero coding. - Should be proficient with usage of LAB equipments like oscilloscopes, logic analyzers, current and voltage probes etc. - Study the customer requirements and project guidelines/execution methodologies and quality assurance programs. - Hands-on experience for electronic component/packages selection and ability to interact with suppliers whenever needed. - Experience in working on component obsolescence, product sustenance and design enhancement projects. - Basic knowledge of OrCAD, Allegro PCB. Basic knowledge of Schematic & PCB designs. - Basic knowledge in Firmware development using C/C++. - Responsible for complete documentation package including BOM, layout, fabrication & assembly drawings. - Candidate will also work directly with PCB fabricators on technical questions and fabrication issues. - Self-driven and proactive on problem solving and test/debug of the designed product. - Skills in device driver development, Linux porting on ARM processors is an added advantage. - Handled the tasks of preparing documentation of detailed design of circuits. - Possess good judgment and decision-making skills. - Possess Good Communication skills.

Job DescriptionExperience in programming Embedded C/C++ applications with strong background in C/C++ inheritance, templates and pointers.Strong in OS concepts like efficient multi-threading and resource-sharing.Experience in working with firmware, application and board support packagesExpert knowledge on protocols like (RS485, SPI, I2C, ADCs,PWM,CAN)Embedded development tools and methodologiesVersion Control Systems Clear Case / RTC /GITStrong development experience in embedded C and RTOSShould have detailed knowledge and experience on microcontrollers / microprocessors ( 16 bit/32 bit)Experience in configuration management & defect tracking toolsOthers : Strong debugging skillsStrong communication and interpersonal skills.Must be a self-starter.Ability to work as part of a dedicated project team and independentlyExperience - 2 to 6 yrsIndustry : Consumer ElectronicsIndustrial AutomationHealthcareAerospaceEtc

We are looking for 250 Automative Embedded Software Engineers Posts in Bangalore, Chennai, Coimbatore, with deep knowledge in Fusa Engineer, PIL Vectar Caast, Linus Kennel Developer, Android HMI, C++ Developer, Trainer, Embedded Developer, Autostar BW and Required Educational Qualification is : B.Tech/B.E

Position - Embedded DeveloperExperience: 2-8 yearsNature of Experience: Experience in Embedded C, driver development, firmware development and boot loader. Good understanding of UDS protocol and UDS-based bootloader is a must. Good understanding of CAN protocol is a must. Should be familiar with various CAN tools such as CANoe, CANALYZER, VFLASH Basic understanding of CAPL scripting. Knowledge of protocols like RS232, SPI and I2C. Familiarization with SDLC and various documents. Experience working on Renesas/ NXP/Microchip microcontrollers. Experience in embedded software/hardware integration and testing. Good understanding of design documentation for embedded systems. Should have knowledge of hardware design and Problem-Solving ability. Skillset to use Hardware tools like JTAG / Jlink debuggers for troubleshooting

Experience in programming Embedded C/C++ applications with strong background in C/C++ inheritance, templates and pointers. Strong in OS concepts like efficient multi-threading and resource-sharing. Experience in working with firmware, application and board support packages Expert knowledge on protocols like (RS485, SPI, I2C, ADCs,PWM,CAN) Embedded development tools and methodologies Version Control Systems Clear Case / RTC /GIT Strong development experience in embedded C and RTOS Should have detailed knowledge and experience on microcontrollers / microprocessors ( 16 bit/32 bit) Experience in configuration management & defect tracking toolsOthers : Strong debugging skills Strong communication and interpersonal skills. Must be a self-starter. Ability to work as part of a dedicated project team and independently

Job Description:Good Knowledge of C and Embedded C Programming.Good Knowledge of 32-bit ARM Microcontrollers like STM32Good Knowledge of Keil IDE and IAR Embedded Workbench IDEGood Knowledge of Hardware Debugger tools JTAGs.Good Knowledge of communication Protocols like UART, I2C, SPI, USB, Ethernet.Candidates with knowledge of Automotive protocols like CAN, Lin will be preferred.Candidates with knowledge of RTOS programming will be preferred.Good Knowledge of Version Control Systems like Git, Jira, Bitbucket.Good communication skills and ability to learn new thingsInterested candidates can share your Updated CV to the below email

Design and Develop Embedded Software (Low Level Driver) for multicore Controller, Safety and Security modules Analyze Software and System Requirements in line with AUTOSAR Spec Participation in customer meetings for requirement clarification Derive Verification and Validation criteria for Requirements Derive the simulation software requirements based on the validation scope and approach Configure base Software components in accordance with customer specific requirement AUTOSAR sw component integration and RTE Configurations Perform SW Safety Analysis as per ISO26262 Support in task estimations, technical reviews, technical clarifications, problem analysis discussions Willing to travel to customer site @Europe on business need

Training Graduate Engineers, Working Professionals, Corporate Freshers and Laterals.College Workshop Trainings.Content Development, Technical Assessment and Evaluation, Project developmentSkills Required * Strong in Electronics Fundamentals, C-programming, Micro-controllers STM, CAN, LIN Protocol, AutosarMandatory * C-programming, Analog and Digital Electronics, ARM controllerDesirable * Arduino, NodeMCU Microcontroller programming, Autosar

Education : BE/B-tech in EEE/ECExperience : 3-6 yearsRole : Embedded EngineerDepartment: Design and R&DSkills and Requirement:1. Work experience and well knowledge of C, C++ and Embedded C programming.2. Should have experience in protocols like SPI, UART .3. Good knowledge of ADC, DAC, Unipolar signal generate/read, Memory operation, Watchdog timer, PWM and interpt programming concept.4. Should have good knowledge of trouble shooting for software and hardware.5. Good knowledge of AVR and PIC microcontroller coding6. Good commands on Microchip and Arduino software7. Should have good experience in handling Customer queries and coordination8. Good Team worker with interpersonal and strong communication skills necessary to work well with others

Responsible for developing/modifying the Low Level drivers or Firmware This work involves Bare Metal Programming =>o Expected to understand Micro-controller Datasheets.o Responsible for Register/Assembly Programming. Domain can be Automotive/Platform/Mobile/MultimediaRequirements - Minimum 5-8 years' experience in developing Low Level Drivers/Firmwareo Bus Protocols :- I2C, SPI, USB , PCI or CAN etco Devices :- EEPROM, NAND Flash, RTC ,LCD, ADC etco Firmware :- Audio/WLAN/Bluetooth etc. Good Embedded C programming Skills. Good Hand-on in Microcontrollers ( Renesas/Infineon/Freescale ( NxP) Good in ARM Micro-processor, preferable ARM-Cortex variants Extensive debugging skills , preferably Trace32 Debugger. Bachelor's degree in Electronics Engineering or similarSoft skills Good Communication Skill and Good Attitude to work in service based companiesGood to have Knowledge of IAR, Keil, Eclipse development environments Good Knowledge in RTOS (uCOS/ThreadX/Free RTOS/Nucleus/MQX/VxWorks)Good in ARM Assembly Programming

2 Software Engineer with 5+ years of experience in C++who worked onmedical devices domain. Work from home option. Need to take one Hacker rank Test online to qualify for further process. send your CVs urgently

Experience in C/C++ programming for Embedded Systems. Experience in developing SDK's/libraries in C/C++. Strong Experience in Linux programming. Experience in V4L2, LibCamera libraries. Experience in developing Device Drivers. Experience in RTOS programming Experience in Designing, Coding and Testing of Embedded Systems Hands on work experience on Hardware Boards like Raspberry Pi / Microcontroller based boards. Strong Debugging skills of Embedded Software. Experience in SPI, UART, I2C protocols Experience in Image processing libraries like OpenCV. Experience in Software Release Management. Experience in Source Code Management Tools like GitHub / Bitbucket Experience in CI/CD tools like Jenkins.[Good to have Skills]: Experience in Python programming Experience on IoT technologies and communication protocols Experience in ML, Deep learning Excellent communication and presentation skills, a great attention to detail.

C ProgrammingLinux Internals ( System calls, IPC, Network Programming, POSIX Multi-thread programming)Systemd and D-BUSDESIRABLE SKILLS :-C++ ProgrammingLinux system start-up, uBootBasic Linux Device driver knowledgeLinux Build framework Yacto-Bitbake, BuildrootPython scriptingDebug using tools such as GDBVersion control - GIT and SVN