Electrical Designer Graduate Experience Jobs in Delhi

The Electrical Design Engineer is responsible for designing and developing electrical systems for building and infrastructure projects. The role ensures efficient, safe, and code-compliant electricaldesigns covering power distribution, lighting, and low-voltage systems.Key Responsibilities:1. Electrical System Design (HT/LT):- Collaborate with project teams to understand client requirements and electrical load needs.- Prepare electrical load calculations and power distribution layouts including control schematics.- Design lighting systems, emergency power, grounding & earthing systems, and lightning protection etc.- Selection and sizing of equipment including Transformers, Generators, UPS, Panels, Circuit Breakers, Cables, and Switchgear etc.- Prepare detailed single-line diagrams (SLDs), wiring/control schematics, and equipment layouts.- Design of ELV systems (Fire Alarm, CCTV, Access Control, Data & Communication).- Carry out HV, LV and EIV with load calculations and system design2. Code Compliance:- Ensure compliance with IEC, NEC, IS, and local authority regulations.- Stay updated on latest electrical codes, standards, and sustainable design practices.3. Technical Support:- Provide technical input during design development and construction.- Assist in resolving site-related issues and ensure adherence to design intent.4. Documentation:- Prepare and maintain electrical design reports, drawings, and calculation sheets.- Maintain clear and accessible documentation for project teams/records.Qualifications:- Diploma or Bachelors degree in Electrical Engineering.- Minimum 5 years of experience in electrical design.- Strong knowledge of electrical design principles, power distribution, and low-voltage systems.- Proficiency in AutoCAD, Revit MEP, or similar software.- Knowledge of load analysis software (ETAP, Dialux, etc.) preferred.- Effective communication and collaboration skills. - Attention to detail and strong organizational skills.

MUST HAVE 5-10 years experience in making AUTOCADDrawings, is capable to interpret electrical circuits into drawings

Create and review control panel wiring diagrams and schematics.Ensure that all wiring diagrams comply with relevant standards and regulations.Specification Management:Gather and understand project specifications and requirements.Translate customer requirements into detailed wiring plans.Component Selection:Select appropriate components and materials for the control panel.Ensure compatibility of components with the control panel design.Wiring and Assembly:Oversee the wiring and assembly of control panels according to design specifications.Ensure correct installation and connection of electrical components.Quality Assurance:Conduct inspections and testing of wiring to ensure functionality and safety.Troubleshoot and resolve any wiring or electrical issues that arise.Compliance:Ensure all work meets relevant electrical codes and safety standards.Prepare documentation for compliance and regulatory purposes.Coordination:Coordinate with other teams or departments involved in the project, such as engineering, manufacturing, or installation teams.Communicate with clients to address any wiring-related queries or issues.Documentation and Reporting:Maintain accurate records of wiring designs, changes, and updates.Prepare reports and documentation for project stakeholders.Training and Support:Provide training or support to installation teams or clients regarding wiring and control panel operation.Offer technical assistance for troubleshooting and maintenance.Project Management:Manage timelines and ensure that wiring tasks are completed on schedule.Oversee the allocation of resources and materials for wiring tasks.Each role may vary depending on the specific needs of the project and organization,

JMB is looking for Electrical Design Engineer with 2-4 Years of designing experience into Residential, Commercial, Hospitals, Malls projects etc.Hands on experience of working on AutoCAD and Indian codes NBC is a must.Can take responsibility, accountability of work assigned in team as well as individually.As a part of the building services for delivering electrical building and external services detailed design development services Electrical load requirement and development of fault level and voltage drop calculations; Equipment Selection like transformers, diesel generators, and HT panels; Preparation of Design Basis Report, Tender, and specification documents; Development of Single Line Diagram (SLD) and space planning for substations including meter room; Approval of shop drawing, G.A. drawings, and control scheme; and Street Lighting Design. Electrical load requirement and development of fault level and voltage drop calculations; Equipment Selection like transformers, diesel generators, and HT panels; Preparation of Tender and Specification documents; and Development of Single Line Diagram (SLD) and space planning for substations including meter room.,

As a part of the building services for delivering electrical building and external services detailed design development services Electrical load requirement and development of fault level and voltage drop calculations; Equipment Selection like transformers, diesel generators, and HT panels; Preparation of Design Basis Report, Tender, and specification documents; Development of Single Line Diagram (SLD) and space planning for substations including meter room; Approval of shop drawing, G.A. drawings, and control scheme; and Street Lighting Design. Electrical load requirement and development of fault level and voltage drop calculations; Equipment Selection like transformers, diesel generators, and HT panels; Preparation of Tender and Specification documents; and Development of Single Line Diagram (SLD) and space planning for substations including meter room.

Job descriptionWe Have Multiple Positions Available in Solar MNC. Kindly advise for your best matching position1.Technical Head2.Head Solar Design3.Electrical Transmission Head.4.Tendering Manager5.Project Manager Technical6.Execution Site Project ManagerRequired Candidate profileTravel to Africa: As and When RequiredSalary :-Depends on your previous /current salaryExcellent Communication

We are looking for Solar Site Engineers for our sites:Openings:- No. of Openings:- 4- North IndiaJob Responsibilities:-Should have prior experience of Working in Solar Industry /Electrical Projects-- Experience in erection, installation and commissioning in PV power projects &conducting electrical work inspections. Designing of arrangements of the solar panels for Rooftop & Ground Mounted & other various supported Electrical equipments & selection of cables for plant including layouts & schematic diagrams and calculation of technical Sizing, BOQ/BOM End to end execution of solar projects (Rooftop & Ground Mounted).--- System & Component Failure Investigations / Root Cause Analysis AMC / Service Support.--- Understanding and designing in AutoCAD and coordinating with the installation team.--- Comfortable in traveling, required to travel & stay at various Work Location.--- Ensures that all the works done are in accordance with the approved construction drawings, contract project specifications, and all applicable standards.--- Provide technical direction or support to installation teams during installation, start-up, testing, system--- Responsible for complete project management through the installation, testing and commissioning of the system. Working with the company's other engineers and program managers to ensure customers needs are met.--- Develops plans, coordinates and directs the engineering work for a major project, or several smaller, but complex projects, or for the design within a specific discipline.--- Maintains engineering records, lists and reports as required to ensure compliance with the clients schedule, adherence to the budget, adherence to procurement specification, or to ensure engineering problems are monitored and resolved.--- Responsible for operational level understanding of the requirement of the client/customer, Site Visits, Site feasibility & Solar Systems Design and complete execution.

Job Openings for 1 Electrical Engineer Job with minimum 5 Years Experience in Bawana industrial area Delhi having Educational qualification of : B.Tech/B.E with Good knowledge in Electrical Engineering,Mechanical Engineering,Electronics Engineering,Electrical Maintenance,Cable Laying in Ceiling fan production. Relevant candidate can contact us.

WE NEED AN ELECTRICAL ENGINEER. WHO HAS EXPERIENCED IN OFFICE INTERIOR PROJECTS. OUR OFFICE IN DEFENCE COLONY, DELHI. OUR SITES ARE IN DELHI NCR.

We are looking for an experienced and detail-focused MEP Costing Engineer. The person will handle cost estimates and tender documents for HVAC, Plumbing, Utility, and Firefighting systems. They will also work with vendors and project teams to manage budgets and pricing.Key Responsibilities:Prepare cost estimates for materials, labor, and equipmentManage the full tender process: prepare documents, submit bids, and negotiateWork with project teams, suppliers, and procurement to get cost detailsKeep CRM system updated with project inquiries and client follow-upsTalk to vendors and get price quotesKeep records of all costing and make sure rules and standards are followedQualifications and Skills:Bachelors degree in Mechanical EngineeringAt least 5 years of experience in HVAC/MEP costingGood knowledge of HVAC, Plumbing, Firefighting, and Utility systemsGood skills in Microsoft Excel; CRM tools are a plusStrong in analyzing data and negotiatingwithvendors

1. Design and planning of Security and ELV systems for all types of buildings from concept design through to detailed design. Design , Fire Alarm , CCTV , BMS, Access Control , BOQ.2. Provide design solutions for technical issues for Security and ELV systems design.3. Auto CAD Knowledge.4. Good understanding of building systems related to HVAC, Electrical, Plumbing, etc.5. Design acumen for Smart Services and Building management system will be an added advantage.

A degree BE/ME in electrical engineering from a recognized university. Candidate with a minimum of 5 years of experience in the areas of Renewable Energy Systems like Solar PV, Wind Energy and Battery Energy Storage Systems. Out of which minimum of 2 years should be of working on the design, simulation, and commissioning of the utility scale BESS (Battery Energy Storage System). Experience with microgrid and hybrid energy system simulation tools (Homer, Homer Grid, Fractal OR Plexos) and power system simulation tools (PSSE, Dig-Silent Power-Factory, ETAP) would be preferred. Clear understanding of the different parameters for the design, selection, and sizing of the batteries as well as leveraging the parameters to arrive at the most optimum sizes of the batteries. Should have a good understanding of Battery Energy Storage System chemistry selection, design, performance modelling, lifetime estimation simulations of batteries, degradation and augmentation schedules. Experience in the design of battery system sizing using simulation tools like MATLAB or equivalent software. Knowledge of different applications of battery systems and dispatch optimization for different applications. Preparation of single line diagrams and layout for the battery energy storage system and coordination with the electrical, civil and PV design teams for complete packages for installation. Basic understanding of the overall integration of BMS, EMS and SCADA systems would be an added advantage. Prepare/ review technical specifications for BESS systems and other electrical equipment, preparation of scopes of work documents and performance/ testing documents. Knowledge of energy modelling and LCOE/ LCOS (as applicable) calculation for Hybrid Renewable Energy project (especially Solar/ Wind + BESS). Investigate design factors such as function, durability, performance, efficiency, and contractual requirements.

Electrical Design Electrical safety category circuit PLC wiring and Logic Calculation of load for selection of fuse sizing for the system and their end power devices Sensors type and wiring Electrical Design,PLC Design, AutoCAD Design. Panel Design machine Design . 5 Days working(Work from office) Timing- 12AM To 8PM