Electrical Automation Engineer Jobs

As an Electrical Automation Engineer, you will be responsible for designing, developing, and maintaining electrical automation systems. You will work closely with various engineering teams to ensure efficiency and reliability in production processes. Your role will include:- **System Design and Development**: Creating detailed designs for electrical automation systems, ensuring they meet project requirements and industry standards.- **Installation and Commissioning**: Overseeing the installation and commissioning of automation systems, ensuring they are set up correctly and function as intended.- **Troubleshooting and Maintenance**: Diagnosing issues in existing automation systems and implementing effective solutions to minimize downtime.- **Collaboration with Teams**: Working alongside mechanical and software engineers to integrate systems and optimize overall performance.- **Documentation and Reporting**: Maintaining clear documentation of all designs, modifications, and troubleshooting procedures, and preparing regular reports for management.To be successful in this role, you should possess a B.E or an equivalent advanced/higher diploma, along with 2 to 5 years of relevant experience in electrical automation. Proficiency in programming languages related to automation systems is essential. You should also have a strong understanding of electrical circuits, sensors, and control systems. Effective communication skills and the ability to work collaboratively in a team environment are important. A willingness to learn and adapt to new technologies will also contribute to your success in this position.

Service Engineer - Atlas Copco Air Compressors This is a full-time on-site role for a Service Engineer specializing in air compressors, located in Biratnagar. The Service Engineer will be responsible for conducting routine maintenance, troubleshooting technical issues, providing field service, and performing repairs on air compressor systems.

Strong knowledge of PLC programming & troubleshootingExperience in industrial automation systemsUnderstanding of control panels, sensors, and instrumentationAbility to handle installation, commissioning & maintenance workWillingness to travel for site support

Digitron India Pvt. Ltd. is looking for an experienced and skilled L2 Engineer to join our growing technical team. The ideal candidate should have handson experience in CCTV installation & troubleshooting, Access Control Systems, and hardwarelevel networking.This role involves up to 70% travel Pan India, so field-readiness and flexibility are essential.Key ResponsibilitiesInstall, configure, and maintain CCTV, ACS, and related ELV systems.Diagnose and troubleshoot onsite technical issues independently.Manage networking devices such as switches, routers, and LAN/WAN setups.Coordinate with clients and internal teams for smooth project execution.Prepare installation reports, service logs, and documentation.Provide Level 2 support for escalated technical issues.Travel to client sites as per project requirements.Required SkillsStrong technical troubleshooting skills in ELV Systems (CCTV, ACS, Networking, OFC, Wireless Devices, VMS, etc.)Ability to resolve on-site technical & operational issues independentlyProject Management & Vendor Management abilitiesTeam Management & Client Coordination skillsStrong documentation & reporting skillsGood verbal and written communicationProfessional behaviour and etiquettesUnderstanding of ground work & civil work (as per requirement)Resource planning & arrangementWillingness to travel frequently (Pan India)RequirementsEducation: Diploma or B.E. in Electronics, Electrical, Computer Science, or related fieldExperience: 35 years in CCTV, ACS, ELV systems & networkingStrong knowledge of IP Cameras, NVR/DVR, biometric systems & network architectureAbility to read wiring diagrams and site layoutsStrong client-handling and communication skillsMust be open to traveling up to 70% of the timeBenefitsCompetitive salary up to 35,000 per monthTravel and site allowances as per company policyOpportunity to work on large-scale infrastructure & security projectsSkill development and technical training supportHow to ApplySend your updated resume to: hr@digitronindia.in 9227988489 (Between 10:00 AM to 07:00 PM)

Job Description:Fire Alarm, PA, BMS, DCS, SCADA, PLC, MCC control System Installation. The ideal candidate will be responsible for the installation, maintenance, and testing systems to ensure they meet safety codes and regulations. This role requires strong technical abilities, attention to detail, and a commitment to safety standards.Duties:Basic troubleshooting:Identifying and resolving simple electrical issues like faulty switches, blown fuses, or malfunctioning outlets. Component installation replacement:Replacing worn-out electrical components like sensors, machine parts, and standard electrical fixtures. Wire connection:Connecting wires to fixtures and appliances according to proper electrical codes. Circuit testing:Performing basic electrical tests using multimeters to check voltage, current, and continuity. Conduit installation:Measuring, cutting, threading, drilling and installing electrical conduit as needed. Cable pulling:Pulling wires through conduit, Cable trays. Preventative maintenance:Conducting routine inspections of electrical systems to identify potential problems. Following safety procedures:Adhering to all safety guidelines including proper use of personal protective equipment (PPE). Reading basic electrical diagrams:Interpreting simple electrical schematics to understand wiring layouts. Reporting issues:Communicating any complex electrical problems to higher-level technicians or engineers

Innovic India Pvt. Ltd. Offers Jobs for B.Tech/Diploma Fresher Engineers, Electrical Fresher engineers in Industrial Automation Field.We are Looking B.E/B.Tech/Diploma Electrical fresher engineers who have good Practical Knowledge of PLC, SCADA, VFD, HMI, DCS, Panel Designing, Basic Instrumentation, AutoCAD Designing and more..for more details about job contact on +91-8882999066

Roles & Responsibilities-To manage all technical aspects of production including BOM creation, wiring diagrams, quality assurance, and supporting assembly teams.Requirement Skills-Prepare, update, and validate BOMs, wiring diagrams, and panel layouts-Support creation of job cards (MJC, PJC, RJC) from technical perspective-Perform and document quality control checks-Coordinate with workers for correct assembly & wiring practices-Maintain document revisions, project history, and customer-specific versions-Participate in training, testing, and custom project execution-Provide technical input to design or troubleshooting when requiredWork Location-Factory (SANAND)Job Type-Full-time Duty: 10:00 am to 6:30 pmWeek Off-Sunday (1st & 3rd Saturday)

Perform troubleshooting, repair, inspection, and maintenance of marine electrical and automation systems onboard vessels and shipyards.Install, configure, and commission:Navigation systems (Radar, Gyro Compass, GPS, ECDIS, Autopilot)Communication systems (VHF, MF/HF, GMDSS, Satcom)Engine room automation and monitoring systems (AMS, PLC, I/O Systems, Control Panels)Electrical distribution equipment (Switchboards, MCCs, Transformers, Breakers)Conduct fault diagnosis using test instruments (multimeters, loop testers, oscilloscopes, etc.).Perform wiring, cable routing, termination, and panel assembly as required.Read and interpret technical manuals, electrical drawings, P&ID, and system schematics.Prepare service reports, job completion notes, and update documentation.Coordinate with ship crew, shipyards, and internal teams for smooth execution of work.Travel to shipyards, offshore anchorage, customer sites as required (short notice work possible).Minimum 4+ years hands-on experience in marine electrical/automation field.Strong knowledge of marine navigation, communication, or engine room automation systems.Ability to independently troubleshoot and resolve faults onboard.Good understanding of control circuits, sensors, PLC logic, relays, and signal loops.Familiarity with brands such as Furuno, JRC, Raytheon Anschtz, Sperry, Sailor, Skipper, Yokogawa, Siemens, HMI/SCADA, etc. is an advantage.Comfortable working onboard vessels, engine rooms, and shipyards.Ability to work under pressure and meet operational timelines.

We are looking for Electrical Engineers to join our marine service team.Responsibilities include:Installation and troubleshooting of marine electrical systemsAutomation and control system work onboard vesselsPanel wiring, testing, and commissioningSupport ship repair and retrofit projectsRequirements:Diploma/ITI/Engineering background in Electrical or AutomationExperience in marine or shipyard environment preferredWilling to travel between Singapore and Indonesia

Installation & Commissioning:CCTV camera installation and integration Install smart devices like keypads, touch panels, sensors, smart lighting, motorized blinds, AV systems, and networking devices.Ensure proper wiring, integration, and physical setup of all equipment.System Configuration & Programming:Configure and program automation systems (e.g., lighting, HVAC, audio-video, security, and curtains).Coordinate with programmers or carry out basic system programming if required (depending on experience).Testing & Handover:Test system functionality and ensure all devices communicate as expected.Conduct demonstrations for the client during project handover and provide basic training.Troubleshooting & Support:Diagnose and fix system issues (hardware or software).Attend service calls for device replacement, system errors, or client-reported problems.Preventive & Annual Maintenance:Carry out scheduled preventive maintenance for AMC clients.Check system performance, firmware updates, and hardware health.Client Coordination:Interact with homeowners, architects, and interior designers for site-level coordination.Provide updates to project managers or team leads on service call status and installation progress

Knowledge Of Electrical Automation Engineer

the candidate should have extensive knowledge of electrical panels, motors, pneumatic systems. He should be able to setup/ install plant and machinery. Also, he should be motivated with newer technologies.

Prestige Consortium Continental (PCC) is the Best Group Construction & Supply Co. and was established mainly targeting for factory, engineering, works, oil and gas and office construction. PCC was established aiming to provide higher quality factory building construction to meet new demand of American businesses.We have more than 20 years of experience in designing and building factories, warehouses, steel structures and showrooms for the variety of business fields and successfully completed more than 100 projects and satisfied our customers, mostly Japanese and European companies.AVAILABLE POSITIONS:HR Recruiter, Safety Officer, Electrician, Architectural engineers, Civil Engineer, Construction manager, Construction Engineer, Construction worker, Site Engineer, Admin Officer, Mechanical Engineer, QC/QA Engineer, QS Engineer, HSSE Manager, IT, Administration, Site Admin, Piping Design engineer, Crane Operator, Welder,HR,Accounting,Marketing etc.For interested and qualified candidates you can apply by emailing us with your resume on the above position for screening and must posses a valid international passport in case you are selected.Other available jobs are Construction,Carpenter, Healthcare workers (Registered Nurses, Home Health Aides), Food Service (Canteen Fast Food Workers, Servers). Highly needed for site posting .

Innovic India Pvt. Ltd. is hiring for B.E/B.Tech/Diploma/ITI Fresher engineer/Electrical Engineer/Mechanical Engineer/Instrumentation & Control Engineer for Patna, Noida, Delhi NCR Location.We are seeking Fresher Electrical Engineer with Hands on Practical Training on Industrial Automation( PLC, SCADA, DCS, HMI, VFD, Instrumentation, Panel Designing, AutoCAD Designing etc...Interested candidate can contact us on +91-8882999066Email- bharti.innovic@gmail.comEmail- www.innovicindia.com

Role: Electrical Automation EngineerWork Experience: 0-1 years.Work Location: Delhi NCRMust-Have Skills: SCADA, PLC, HMI, VFD.Job Description:Development, Programming, Troubleshooting & Modification: Should have expertise in Development, Programming, troubleshooting & Modification of automation Products (PLC, HMI/SCADA, VFD, SERVO, RTU etc).Commissioning: Visiting onsite to ensure if commissioning is done within the time frame. Providing timely Feedback on the ground realities through documentation to the Core Engineering and Manufacturing teams. Strong analytic, verbal, and written communication skills.contact on +91-8882999066

Innovic India is Looking for Electrical, Electronics, Instrumentation, Mechanical Fresher Engineers for Our Prestigious Client Companies. We offer Electrical Engineering jobs, Mechanical Engineering jobs, Automation Trainee engineer jobs, PLC Programmer Jobs in Delhi Fresher Candidates Must Have proper practical knowledge of Industrial Automation like PLC, SCADA, HMI, VFD, PANEL DESIGN, AUTO CAD, DCS, MOTOR etc.Role: Automation Trainee Engineer.Call or whatsapp on: +91-8882999066email: bharti.innovic@gmail.com