Fresher Calibration Jobs

1. Execute the installation and alignment of weighbridge platforms (pit or pitless) at customer sites.Install load cells, junction boxes, indicators, and weighbridge controllers. 2. Perform electronic commissioning, including cable laying, junction box wiring, and indicator configuration.3. Perform initial and final calibration using test weights to ensure accuracy.4. Conduct function/operational testing to verify performance.5. Servicing, Troubleshooting & RepairProvide on-site repair and maintenance (preventive and breakdown) for Electronic Weighbridges.Diagnose and fix technical issues related to load cells, indicators, and weighing software.Attend to service calls from customers and provide technical support via phone/email6. Customer Support & TrainingTrain customer personnel on operating the weighbridge and software.Maintain a cordial relationship with clients.

Job description:Roles & Responsibilities - Calibration1) Verification of all instruments and gauges calibration status in ACECMS software.2) Instruments and gauges collection from all plants (PG1, PG2, PVEE, ANNEX) andsupplier end.3) Calibration reports preparation and upload in software for all instruments & gauges.4) Instruments and gauges issue to all plants and supplier end.5) Calibration issue, details update in software for all instruments and gauges.6) All instruments like Micrometer, verniercaliper, Jigs & Fixtures, Plug gauge, Snapgauge, Receiver gauge,Ring gauge Air ring gauge and master gear inspection.7) Handling of 2D height gauge, Profile projector, Roughness tester and Hardnesstester.8) Micrometer and Plunger dial - Service and error correction.9) Drawing study & GD & T knowledge.10) SAP handling codes - QA32, MMBE, MB51, ME2L,ME23N,CO11,ZSTOCK,QP01,COOIS,MM03,ZISSUES11) Mail follow up for all new equipments and gauges.12) Gauge planning for all new developmentparts & Excel sheet preparation.13) New equipment purchasing including Enquiry from supplier, PRS preparation withapproved with top management. PO followup& verification PO mail send to supplierend.14) External calibration arrangements and verification of reports.15) AMC arrangement for 2D, profile projector, Hardness tester, Air gauge & Multigauge.16) Courier arrangement for gauge, fixture component as per instruction of Mr.Ravi sir.17) Component master preparation - OPD,Span, OD, ID, Roll test mandrel.18) Roll test mandrel and Bunk - Drawing preparation.19) Taper plug and Ring gauge inspection with sine bar , sine centre.20) Inspection and gauges equipment maintenance on daily basis.21) MSA study as per the plan.22) Calibration report filing & File arrangement.23) Daily basis Room temperature, Humidity checks sheet updating.24) All equipment number issuing & engraving - Gauge excel list entry.25) Prepare all records and Documents as per ISO & IATF standards.26) Attend the New product development meeting for new gauge procurements.27) Prepare all calibration stickers with due date and pasting on each instrument.28) Coordinating with customer for inspection of new parts, Customer audit attend29) Inspection work - FMC all parts (Stage to Final inspection)30) Inspection work - SAME Bevel gear Teeth cutting - Final inspection.Job Types: Full-time, PermanentBenefits:Provident FundExperience:total work: 1 year (Preferred)

We are looking for a Calibration Engineer who will be responsible for ensuring that all measuring instruments and equipment are properly calibrated to maintain accuracy and compliance with industry standards. This role requires attention to detail and a solid understanding of calibration processes.**Key Responsibilities:**- **Perform Calibration Tasks:** Conduct regular calibration of measuring instruments and equipment to ensure they meet specified standards and accuracy requirements. This helps in maintaining quality control.- **Maintain Calibration Records:** Document all calibration activities, including dates, results, and any discrepancies. This is essential for traceability and compliance audits.- **Identify Calibration Needs:** Assess and determine the calibration requirements for various instruments and equipment, ensuring that they operate correctly.- **Troubleshoot and Resolve Issues:** Diagnose and address any calibration-related issues that arise, working with team members to find solutions effectively.- **Collaborate with Other Departments:** Work alongside quality control and engineering teams to ensure seamless operations and assist in resolving technical challenges.**Required Skills and Expectations:**Candidates should hold an ITI certification, showcasing a foundational knowledge of technical processes. You should have a hands-on approach and be comfortable working with various measuring instruments. Strong analytical skills are essential for troubleshooting and resolving calibration issues. Attention to detail and accuracy is critical to ensure compliance with industry standards. A good team player, you should be able to communicate effectively with colleagues and work collaboratively in a full-time office setting. Ideal candidates should be motivated to learn and grow in the calibration field, even with limited experience.

Need FARO CMM Operator for indore pithampur location

Job Opening: Calibration Engineer (Fresher)Company Name: NCQC Laboratory LLPLocation: Ahmedabad, Gujarat (Local candidates preferred)Job Type: Full-TimeSalary: Rs. 2 Lakh to 3 Lakh per yearOther Benefits: Travel allowance for client visits Food allowance during on-site workAbout NCQC Laboratory LLPNCQC Laboratory LLP is a NABL-accredited calibration laboratory located in Ahmedabad with over 25 years of experience. We provide accurate and reliable calibration services using modern instruments and advanced technology.We serve industries such as manufacturing, construction, engineering, and pharmaceutical companies.Job Role Calibration Engineer (Fresher)We are hiring Fresh graduates / diploma holders who are interested in building a career in calibration and measurement. You will receive on-the-job training and work with experienced engineers to learn calibration of different instruments.Key Responsibilities Calibration Work Assist in calibration of instruments such as:o Pressure gaugeso Thermometerso Flow meterso Energy meterso Weighing scales and other instruments Follow calibration standards such as ISO/IEC 17025 Documentation & Reporting Prepare and maintain calibration records, certificates, and reports Ensure all documents are accurate and properly maintainedRequired Skills & Qualifications Education Diploma or Bachelors degree in:o Mechanical Engineeringo Electrical Engineering Basic Skills Basic computer knowledge (MS Word, Excel, etc.) Willingness to learn new skills and techniques Attention to detail and good record-keeping skills Good communication skillsAdditional Requirements Candidate must be a local resident of Ahmedabad (Highly Preferred) Willing to travel to client locations for on-site calibration work Valid driving license required Own vehicle preferred

Key Responsibilities:1. Ensure compliance with medical devices regulations: As a biomedical trainee, you will be responsible for ensuring that all medical devices and equipment meet the necessary regulatory standards and guidelines.2. Assist in conducting clinical trials: You will support the team in planning and executing clinical trials to evaluate the effectiveness and safety of new medical devices.3. Manage CE certifications: You will help in obtaining and maintaining CE certifications for medical devices, ensuring they meet European regulatory requirements.4. Support FDA submissions: Assist in preparing and submitting documentation to the FDA for approval of new medical devices or modifications to existing ones.5. Assist in patent applications: Help in researching, drafting, and filing patent applications to protect the intellectual property of new medical devices.6. Assist in ISO certifications: Support in obtaining and maintaining ISO certifications for quality management systems related to medical devices.7. Assist in devices calibration: Help in calibrating medical devices to ensure accurate and reliable performance.Required Skills and Expectations:- Post Graduate Diploma or M.Sc in Biomedical Engineering or related field.- Knowledge of medical devices compliances and regulations.- Strong attention to detail and ability to follow strict protocols.- Familiarity with CE certifications, FDA regulations, patent processes, ISO standards, and devices calibration.- Excellent communication and teamwork skills.- Ability to work under supervision and learn quickly in a fast-paced environment.

Job Openings for 2 Calibration Engineer Jobs for Freshers & EXPERIANCE I CALIBRATION FEILD in Ambattur Chennai having Educational qualification of DIPLOMO , : I.T.I., B.E, B.Tech, Diplomate of National Board with Good knowledge in Calibration, Instrument Calibration etc.

We require freshers and experienced engineers for our Hyderabad, Naidupeta, Jadcherla and Visakhapatnam Branch. Person willing to travel local in preferred area and perform calibration at Pharma Industries.

Hiring for 4 Calibration Engineer Jobs in Indore for Freshers,Required Educational Qualification is : I.T.I., B.Sc, B.E, B.Tech with Good knowledge in Must have knowledge of English, MS word and excel etc.

A UPS (Uninterruptible Power Supply) service engineerinstalls, maintains, and repairs UPS systemsand related equipment. Key duties include performing installations and breakdown services,troubleshooting technical issues, conducting routine maintenance, and managingdocumentation. This role requires strong electrical and mechanical knowledge, excellentproblem-solving skills, and good customer service.Responsibilities Installation and Maintenance:Install, test, and commission UPS systems,batteries, and stabilizers. Perform routine inspections and preventive maintenance toensure system performance. Troubleshooting and Repair:Respond to emergency breakdown calls to diagnoseand repair faults in UPS systems. Troubleshoot technical issues and perform repairs,such as replacing parts like capacitors and batteries. Documentation:Maintain accurate records of all service activities, including repairs,maintenance, and equipment configurations. Customer Support:Provide technical support to customers via phone or in person.Investigate customer complaints to find the root cause of problems and recommendsolutions. Collaboration:Work with other engineers and cross-functional teams to resolvecustomer issues and provide faster resolutions.Requirements Education:A diploma or ITI in Electrical and Electronics Engineering is oftenrequired. Technical Skills:o Strong understanding of electrical and mechanical systems.o Proficiency in technical troubleshooting.o Experience with equipment like UPS, inverters, and stabilizers. Soft Skills:o Excellent communication and customer service skills.o Strong problem-solving and analytical abilities.o Ability to work independently and as part of a team. Other:o Possession of a valid two-wheeler license is sometimes required for field service.o Familiarity with industry-specific software and diagnostic tools is often necessary.;

Quality Control Asst. in Manufacturing of Automobile Industries

Candidate should be aware about Analytical instruments, Chemical testing, Knowledge of GMP & ISO documentation.

Hiring for 01 Service Engineer Job in East Sikkim, for Freshers,Required Educational Qualification is : I.T.I. with Good knowledge in Machine Maintenance, Instrument Calibration, Preventive Maintenance, Breakdown etc.

Measuring instrument calibration

Key Responsibilities:Perform calibration of instruments in accordance with NABL standardsPrepare calibration reports and maintain recordsField/site calibration as requiredEnsure adherence to quality and safety protocolsRequirements:ITI / Diploma / Degree in Engineering (Mechanical, Electrical, or Instrumentation preferred)Experience in calibration (03 years; freshers can also apply)Good understanding of measurement standards and proceduresWillingness to travel for on-site calibrationsWhat We Offer:Training and career growth opportunitiesExposure to NABL-accredited systems and documentationSupportive and professional work environmento apply, send your CV to:astracalibration@gmail.com For inquiries, contact: 7276496777 / 8379078777

we are hiring staff for technical work

Key Responsibilities:Maintenance & Calibration:Perform regular maintenance and calibration of Gas detectors, analyzers, and other test & measuring instruments.Troubleshoot and repair faulty instruments to ensure optimal performance.Prepare calibration certificates and maintain service records.Installation & Commissioning:Install and commission field instruments and associated control systems at client locations.Ensure proper system integration with existing control systems.Conduct system testing and verification to ensure instruments are operating according to designated specifications.Spare Sales & Service Enquiries:Handle customer inquiries related to spares, technical support, and service requirements.Identify, recommend, and supply spares required by clients, ensuring correct specifications.Process orders and ensure timely delivery of requested spares.Quotation Preparation:Prepare and submit accurate and competitive quotations for services and spares, ensuring clarity and alignment with customer requirements.Collaborate with the sales & projects team to provide pricing and support for project bids.Client Interaction & Follow-up:Maintain continuous communication with clients to provide service updates, technical support, and ensure satisfaction.Follow up on service-related requests and ensure timely resolution of issues.Build and maintain strong relationships with clients for future service opportunities and projects.Documentation:Maintain comprehensive records of all service activities, including maintenance logs, calibration data, quotations, and client correspondence.Ensure proper documentation for compliance with Industry / ISO standards and regulations.

We are seeking a detail-oriented Calibration Engineer/Technician to join our team. The ideal candidate will be responsible for performing calibration, validation, and maintenance of instruments and equipment to ensure accuracy

A UPS (Uninterruptible Power Supply) service engineerinstalls, maintains, and repairs UPS systemsand related equipment. Key duties include performing installations and breakdown services,troubleshooting technical issues, conducting routine maintenance, and managingdocumentation. This role requires strong electrical and mechanical knowledge, excellentproblem-solving skills, and good customer service.Responsibilities Installation and Maintenance:Install, test, and commission UPS systems,batteries, and stabilizers. Perform routine inspections and preventive maintenance toensure system performance. Troubleshooting and Repair:Respond to emergency breakdown calls to diagnoseand repair faults in UPS systems. Troubleshoot technical issues and perform repairs,such as replacing parts like capacitors and batteries. Documentation:Maintain accurate records of all service activities, including repairs,maintenance, and equipment configurations. Customer Support:Provide technical support to customers via phone or in person.Investigate customer complaints to find the root cause of problems and recommendsolutions. Collaboration:Work with other engineers and cross-functional teams to resolvecustomer issues and provide faster resolutions.Requirements Education:A diploma or ITI in Electrical and Electronics Engineering is oftenrequired. Technical Skills:o Strong understanding of electrical and mechanical systems.o Proficiency in technical troubleshooting.o Experience with equipment like UPS, inverters, and stabilizers. Soft Skills:o Excellent communication and customer service skills.o Strong problem-solving and analytical abilities.o Ability to work independently and as part of a team. Other:o Possession of a valid two-wheeler license is sometimes required for field service.o Familiarity with industry-specific software and diagnostic tools is often necessary.;

A UPS (Uninterruptible Power Supply) service engineerinstalls, maintains, and repairs UPS systemsand related equipment. Key duties include performing installations and breakdown services,troubleshooting technical issues, conducting routine maintenance, and managingdocumentation. This role requires strong electrical and mechanical knowledge, excellentproblem-solving skills, and good customer service.Responsibilities Installation and Maintenance:Install, test, and commission UPS systems,batteries, and stabilizers. Perform routine inspections and preventive maintenance toensure system performance. Troubleshooting and Repair:Respond to emergency breakdown calls to diagnoseand repair faults in UPS systems. Troubleshoot technical issues and perform repairs,such as replacing parts like capacitors and batteries. Documentation:Maintain accurate records of all service activities, including repairs,maintenance, and equipment configurations. Customer Support:Provide technical support to customers via phone or in person.Investigate customer complaints to find the root cause of problems and recommendsolutions. Collaboration:Work with other engineers and cross-functional teams to resolvecustomer issues and provide faster resolutions.Requirements Education:A diploma or ITI in Electrical and Electronics Engineering is oftenrequired. Technical Skills:o Strong understanding of electrical and mechanical systems.o Proficiency in technical troubleshooting.o Experience with equipment like UPS, inverters, and stabilizers. Soft Skills:o Excellent communication and customer service skills.o Strong problem-solving and analytical abilities.o Ability to work independently and as part of a team. Other:o Possession of a valid two-wheeler license is sometimes required for field service.o Familiarity with industry-specific software and diagnostic tools is often necessary.;