Avionics Job Vacancies in Kolkata

An Aircraft Maintenance Technician is responsible for inspecting, maintaining, repairing, and ensuring the airworthiness of aircraft systems and components. They play a critical role in aviation safety by performing routine maintenance checks and troubleshooting mechanical or technical issues. Key ResponsibilitiesPerform scheduled and unscheduled maintenance on aircraftInspect aircraft systems, engines, and components for faults or wearDiagnose mechanical and electrical issues using testing equipmentRepair or replace defective aircraft partsConduct pre-flight and post-flight inspectionsEnsure compliance with aviation safety regulations and standardsMaintain accurate maintenance logs and documentationCoordinate with engineers, pilots, and ground staffFollow strict safety procedures and quality standards Core DutiesEngine inspection and servicingHydraulic and electrical system maintenanceTroubleshooting avionics and mechanical systemsTesting aircraft performance after repairsUsing technical manuals and diagnostic tools Qualifications & RequirementsDiploma or Degree in Aircraft Maintenance Engineering (AME) or relevant fieldCertification from aviation authorities such as DGCA, FAA, or equivalentValid AME license (preferred)Knowledge of aircraft systems and safety standards Skills RequiredStrong technical and mechanical aptitudeAttention to detail and problem-solving skillsAbility to read technical manuals and diagramsGood communication and teamwork skillsTime management and ability to work under pressure Work EnvironmentAirports, hangars, or maintenance workshopsMay require shift work, weekends, and night dutiesPhysically demanding (standing, lifting, working in confined spaces) Salary Range (India)Fresher: 3 - 5 LPAExperienced: 5 - 15+ LPA

Job SummaryThe Avionics Engineer is responsible for the design, development, testing, installation, and maintenance of aircraft electronic systems. This role ensures safe, efficient, and compliant operation of avionics equipment including communication, navigation, surveillance, and flight control systems. The engineer works closely with cross-functional teams to support system integration, troubleshooting, upgrades, and continuous improvement in aviation technology. Key ResponsibilitiesDesign & Development:Design, develop, and integrate avionics systems for aircraft and aerospace applications.Create system schematics, wiring diagrams, and interface control documents.Develop embedded software or hardware for avionics components.Testing & Troubleshooting:Conduct system testing, validation, calibration, and verification to ensure performance standards.Diagnose issues in avionics equipment using testing tools and propose corrective actions.Perform root cause analysis for system failures and implement preventive measures.Installation & Integration:Oversee installation and configuration of avionics systems in aircraft.Ensure seamless integration of avionics with electrical, mechanical, and flight control systems.Coordinate with manufacturing, maintenance, and flight operations teams for system implementation.Compliance & Documentation:Ensure compliance with aviation authorities (FAA, EASA, DGCA) and safety standards.Prepare technical reports, maintenance manuals, and certification documentation.Maintain accurate documentation of design changes, test results, and system configuration.Maintenance & Support:Support maintenance teams in periodic inspections, upgrades, repairs, and system checks.Provide engineering support for aircraft modifications, retrofits, and new product introductions. Required Skills & CompetenciesTechnical Skills:Strong knowledge of communication, navigation, surveillance, autopilot, and flight control systems.Expertise in embedded systems, digital/analog electronics, and circuit design.Hands-on experience with avionics protocols (e.g., ARINC 429, MIL-STD-1553, CAN bus).Proficiency in tools such as MATLAB/Simulink, LabVIEW, PSPICE, Altium, Xilinx, or similar.Knowledge of aviation standards DO-178C, DO-254, RTCA, FAA/EASA guidelines.Soft Skills:Analytical and problem-solving ability with strong attention to detail.Effective communication, teamwork, documentation, and time-management skills.Ability to work under pressure and meet strict deadlines. Education & Experience RequirementsBachelors degree in Avionics Engineering, Aerospace Engineering, Electronics & Communication, Electrical Engineering, or related field.(Preferred) Masters degree in Avionics or related specialization.Experience:Entry Level: 02 yearsMid-Level: 37 yearsSenior: 8+ years in avionics engineering or related aerospace domain Work EnvironmentMay require working in aircraft hangars, manufacturing facilities, laboratories, or test sites.Willingness to travel for project support, testing, and system installation.Must adhere to aviation safety regulations and workplace safety protocols. Job Type & CompensationFull-time / PermanentCompetitive salary based on experience and qualificationsBenefits: Health insurance, travel allowance, training & professional development

Position OverviewThe Aircraft Mechanic / Aircraft Technician is responsible for performing maintenance, repair, inspection, and modification tasks on aircraft to ensure they are safe, airworthy, and fully operational. The role involves hands-on technical work, strict adherence to aviation regulations, and close coordination with engineers, quality inspectors, and flight crews to support efficient flight operations.Key Responsibilities Aircraft Maintenance & RepairPerform scheduled (A, B, C, D checks) and unscheduled maintenance on aircraft and components.Inspect, troubleshoot, and repair airframes, engines, hydraulic, pneumatic, fuel, and electrical systems.Carry out defect rectification, part replacement, and system testing as per maintenance manuals.Conduct routine inspections and ensure all work meets safety and airworthiness standards.Perform line maintenance and base maintenance activities according to daily operational needs.Support pre-flight and post-flight checks to ensure aircraft readiness. Technical & Diagnostic WorkDiagnose and repair mechanical and electrical malfunctions using testing equipment and manuals.Follow manufacturer and regulatory guidelines for maintenance tasks.Utilize specialized tools, precision instruments, and ground support equipment (GSE).Coordinate with engineers to ensure accurate troubleshooting and defect clearance.Ensure calibration and care of maintenance tools and test instruments. Documentation & ReportingRecord all maintenance activities in job cards, logbooks, and technical documents.Update maintenance tracking systems (e.g., AMOS, Trax, Ramco, or Rusada Envision).Ensure accurate documentation for all inspections, replacements, and modifications.Report component failures, delays, and discrepancies to supervisors or engineering teams.Maintain proper traceability of spares and materials used in maintenance. Safety & ComplianceComply with DGCA / FAA / EASA / CAR-145 safety and maintenance standards.Adhere to company safety management systems (SMS) and quality procedures.Follow proper lockout/tagout and hazardous materials handling procedures.Conduct work in accordance with approved maintenance data and aviation legislation.Ensure Foreign Object Damage (FOD) control and maintain a clean work environment. Team CoordinationWork collaboratively with engineers, quality control inspectors, and flight operations teams.Assist in training junior technicians or apprentices on maintenance practices.Communicate effectively with supervisors regarding progress and issues.Support quick turnaround during AOG (Aircraft on Ground) situations.Required Skills & CompetenciesExcellent technical and mechanical aptitude.Strong problem-solving and troubleshooting skills.Proficiency in using hand tools, torque wrenches, and diagnostic equipment.Sound understanding of aviation maintenance manuals and documentation.High level of attention to detail, accuracy, and discipline.Ability to work under pressure, at heights, and in outdoor conditions.Good communication and teamwork abilities.Educational QualificationDiploma / Degree in Aircraft Maintenance Engineering (AME) or Aeronautical Engineering.Certification from an approved training organization (DGCA / EASA / FAA Part-147).Valid AME license in relevant category (B1 Mechanical / B2 Avionics) preferred.Experience05 years of experience in aircraft maintenance, repair, or overhaul (MRO).Experience on specific aircraft types (e.g., Airbus A320, Boeing 737, ATR, Embraer) is an advantage.Fresher candidates with DGCA-approved AME training may also apply (for trainee roles).Working ConditionsWork performed in hangars, workshops, or ramp areas (day/night shifts).May involve rotational shifts, weekends, and emergency standby duties.Physically demanding role requiring manual handling, climbing, and precision work.

We have vacant of 42 Urgent Hiring of Aircraft Maintenance at Airports Jobs in Mumbai, Kolkata, Goa, Visakhapatnam, Trivandrum/Thiruvananthapuram, Kozhikode/Calicut, Chennai, Kannur, Mangalore, Surat, for Freshers Educational Qualification : I.T.I., B.C.A, B.B.A, B.E, B.Tech, Other Bachelor Degree, Post Graduate Diploma, M.Tech, Integrated PG, Any Master Degree Skill Aircraft Maintenance, Aeronautical Engineer, Aviation, Aircraft Engineer, Aircraft Maintenance Engineer, Aircraft Technician, Electrical Engineer, Mechanical Engineer, Civil Engineer, Site Engineer, Project Engineer, Avionics etc.

Job Summary:The Aerospace Engineer is responsible for the design, development, testing, and maintenance of aircraft, spacecraft, missiles, and related systems and components. The role involves applying advanced engineering principles to improve performance, safety, and efficiency, ensuring compliance with industry standards and regulatory requirements.Key Responsibilities: Design & DevelopmentDesign and develop aerospace systems, components, and structures (aircraft, satellites, propulsion systems, etc.).Use CAD and simulation tools (CATIA, SolidWorks, ANSYS, MATLAB, Simulink) to create and test design prototypes.Develop new materials, manufacturing methods, or structural designs to enhance performance.Optimize aerodynamic, thermal, and propulsion system performance. Analysis & TestingConduct aerodynamic and structural analyses using CFD and FEA software.Test prototypes for functionality, safety, reliability, and performance under various conditions.Evaluate data from wind tunnel tests, flight tests, and simulations.Troubleshoot and resolve design or performance issues. Project & System ManagementPlan, manage, and oversee aerospace design or research projects from concept to completion.Integrate subsystems (avionics, propulsion, structures, controls) into a complete vehicle.Coordinate with multidisciplinary teams including electrical, mechanical, and software engineers.Prepare technical documentation, project plans, and progress reports. Research & InnovationConduct R&D for new aerospace technologies, materials, or propulsion systems.Stay updated on emerging trends such as unmanned aerial systems (UAVs), sustainable fuels, and space technologies.Develop innovative solutions to improve flight safety, fuel efficiency, and environmental performance. Compliance & Quality AssuranceEnsure all designs and products comply with aviation regulations and safety standards (FAA, EASA, DGCA, ISO, AS9100).Participate in audits, inspections, and certification processes.Implement quality assurance procedures to ensure reliability and durability of products.Required Skills & Competencies:Strong foundation in aerodynamics, propulsion, thermodynamics, and fluid mechanics.Proficiency in engineering software: CATIA, AutoCAD, MATLAB, Simulink, ANSYS, SolidWorks, or NASTRAN.Analytical and problem-solving abilities for complex engineering challenges.Excellent written and verbal communication skills for technical reporting.Attention to detail and adherence to precision engineering standards.Ability to work independently and as part of a cross-functional team.Strong time management and project coordination skills.Qualifications:Education: Bachelors degree in Aerospace Engineering, Aeronautical Engineering, Mechanical Engineering, or related field.Preferred: Masters degree or specialization in Aerodynamics, Propulsion, or Avionics.Experience: 05 years for entry-level roles; 5+ years for senior positions.Certifications (optional): Professional Engineer (PE), Six Sigma, or Project Management certification.Work Environment:Typically office or laboratory-based, with occasional field or test-site work.Involves collaboration with research institutions, defense organizations, or aviation companies.May include travel to manufacturing plants, airfields, or client sites.Requires adherence to strict safety and confidentiality standards.

As an Aircraft Maintenance Engineer, your responsibilities will include conducting avionics and structural repairs, performing engine overhauls, troubleshooting aircraft systems, and ensuring the safe and efficient operation of aircraft. You will need to have strong technical ability, safety awareness, and excellent communication skills. Key skills required for this position include analytical thinking, problem-solving abilities, and proficiency with diagnostic equipment. You must also have a thorough understanding of aircraft systems and be able to effectively repair and maintain them.

Ground Staff are responsible for ensuring the smooth operation of airport activities, including passenger handling, baggage handling, and aircraft operations. They play a key role in ensuring the safety and comfort of passengers throughout their journey.Responsibilities for Ground Staff may include:- Greeting and assisting passengers at check-in counters- Ensuring passengers' baggage is safely stowed and unloaded- Assisting passengers with boarding and disembarking from aircraft.

We are looking for 71 Vacancies for Mechanical and Electrical Engineers at Aviation Industries Posts in Mumbai, Bangalore, Coimbatore, Imphal, Kolkata, Hyderabad, Tiruchirappalli/Trichy, Chennai, Kozhikode/Calicut, Surat, with deep knowledge in Aircraft Maintenance, Electrical Engineer, Mechanical Engineer, Aerospace Engineering, Aeronautical Engineer, Avionics, Aircraft Engineer, Aircraft Maintenance Engineering and Required Educational Qualification is : I.T.I., B.E, B.Tech, Other Bachelor Degree, Post Graduate Diploma, M.Tech, Any Master Degree