Aircraft Engineer Job Vacancies in Mumbai

An Aircraft Maintenance Engineer (AME) is responsible for inspecting, maintaining, repairing, troubleshooting, and certifying aircraft to ensure they are safe, airworthy, and compliant with aviation regulations. The role involves carrying out scheduled and unscheduled maintenance on aircraft systems, engines, avionics, electrical components, hydraulic systems, landing gear, and structural components while adhering to the standards established by aviation authorities.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine, preventive, scheduled, and unscheduled aircraft maintenance.Conduct daily, transit, weekly, A-check, B-check, C-check, and heavy maintenance inspections.Inspect aircraft structures, fuselage, wings, landing gear, flight controls, and engines.Diagnose and rectify aircraft defects using approved maintenance procedures.Replace, repair, and overhaul defective aircraft components.Ensure all maintenance tasks are completed according to the Aircraft Maintenance Manual (AMM).Troubleshooting & RepairsIdentify mechanical, hydraulic, electrical, pneumatic, and avionics faults.Use specialized diagnostic tools and testing equipment.Repair aircraft systems while maintaining manufacturer specifications.Coordinate with engineering teams for complex technical issues.Perform functional tests after repairs to verify serviceability.Engine & Component MaintenanceInspect aircraft engines for wear, leaks, corrosion, and damage.Perform engine servicing, oil changes, filter replacement, and component inspections.Maintain propellers, Auxiliary Power Units (APU), and fuel systems.Monitor engine performance and recommend corrective actions.Avionics & Electrical SystemsInspect communication and navigation systems.Maintain radar, autopilot, cockpit instrumentation, and electrical wiring.Test aircraft electronic systems for operational reliability.Ensure compliance with avionics maintenance procedures.Documentation & ComplianceComplete maintenance logs, inspection reports, and defect records.Maintain aircraft technical documentation accurately.Ensure compliance with aviation regulatory authorities.Certify aircraft for return to service after maintenance (where appropriately licensed).Follow company maintenance policies and quality assurance procedures.Safety & Quality AssuranceFollow all aviation safety regulations and standard operating procedures.Maintain clean and organized work areas.Ensure proper use of Personal Protective Equipment (PPE).Report safety hazards and technical discrepancies immediately.Participate in safety audits and quality inspections.Team CoordinationWork closely with pilots, technicians, quality inspectors, and operations staff.Coordinate maintenance schedules with flight operations.Assist junior technicians with technical guidance and training.Participate in emergency aircraft recovery and AOG (Aircraft on Ground) support.Required QualificationsDiploma or Bachelor's Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Mechanical Engineering, or Aerospace Engineering.DGCA-approved AME qualification or equivalent aviation authority certification is preferred.Valid Aircraft Maintenance Engineer License (where applicable).Type rating on specific aircraft is an advantage.Relevant experience in aircraft maintenance is preferred.Required SkillsStrong knowledge of aircraft systems and maintenance procedures.Excellent troubleshooting and fault diagnosis skills.Knowledge of aviation regulations and airworthiness standards.Ability to interpret aircraft maintenance manuals and engineering drawings.Strong analytical and problem-solving abilities.Excellent attention to detail.Good communication and teamwork skills.Ability to work under pressure and meet strict deadlines.Computer proficiency in maintenance management software.Good technical documentation skills.Technical KnowledgeAircraft StructuresGas Turbine EnginesHydraulic SystemsPneumatic SystemsElectrical SystemsAvionics SystemsFlight Control SystemsLanding Gear SystemsFuel SystemsAircraft DocumentationMaintenance PlanningAircraft Safety StandardsPreferred CertificationsDGCA Aircraft Maintenance Engineer LicenseEASA Part-66 License (preferred internationally)ICAO-compliant aviation trainingHuman Factors TrainingSafety Management System (SMS) TrainingFuel Tank Safety TrainingEWIS (Electrical Wiring Interconnection System) TrainingAircraft Type Rating CertificationWorking ConditionsAirport hangars, maintenance bases, and line maintenance stations.Rotational shifts including nights, weekends, and public holidays.Outdoor work in varying weather conditions.Physically demanding work involving standing, climbing, bending, and lifting equipment.Exposure to aircraft noise, fuels, lubricants, and hydraulic fluids while following strict safety procedures.Salary Range (India)Fresher: 3.5 - 6 LPA2-5 Years: 6 - 10 LPA5-10 Years: 10 - 18 LPALicensed/Type-Rated AME: 15 - 30+ LPA (depending on airline, aircraft type, and experience)

We are looking for an Aircraft Engineer to join our team in Mumbai. In this role, you will be responsible for ensuring the safety and efficiency of our aircraft operations. You will have the opportunity to work with experienced professionals and learn about aircraft systems and maintenance.Key Responsibilities:- Conduct Inspections: You will perform regular checks on aircraft to ensure they meet safety standards and are in good working condition.- Maintenance and Repairs: You will be responsible for diagnosing issues and carrying out repairs, ensuring that all work is completed according to regulations.- Documentation: Keeping accurate records of maintenance work and inspections is essential for compliance and safety checks.- Collaboration: You will work closely with other engineers and technicians to coordinate maintenance schedules and share knowledge.- Compliance with Standards: You will ensure all operations comply with aviation safety regulations and industry standards.Required Skills and Expectations:- A background in engineering is preferred, but a 12th-grade education is acceptable. - Strong problem-solving skills are essential for diagnosing aircraft issues effectively.- Attention to detail is crucial as aircraft maintenance requires precision and accuracy.- Basic knowledge of aircraft systems or willingness to learn is expected.- Strong communication skills are important for collaborating with team members and documenting inspections and repairs.- A proactive attitude towards safety and a desire to grow in the aviation field will be highly valued.

An Aircraft Maintenance Technician is responsible for inspecting, maintaining, troubleshooting, repairing, and servicing aircraft systems and components to ensure aircraft airworthiness, safety, and compliance with aviation regulations. The technician performs scheduled and unscheduled maintenance activities on aircraft structures, engines, avionics, hydraulic systems, and other critical equipment.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine, preventive, and scheduled maintenance on aircraft.Conduct pre-flight, transit, daily, weekly, and periodic inspections.Inspect aircraft structures, engines, landing gear, and mechanical systems.Ensure aircraft meet safety and airworthiness standards.Identify defects, wear, corrosion, or damage.Troubleshooting & RepairsDiagnose mechanical, electrical, hydraulic, and pneumatic faults.Repair or replace defective aircraft components.Troubleshoot aircraft systems using technical manuals and diagnostic equipment.Perform corrective maintenance and emergency repairs.Aircraft Systems MaintenanceMaintain aircraft engines and propulsion systems.Service hydraulic, fuel, pneumatic, and environmental control systems.Inspect and maintain landing gear and braking systems.Assist in avionics and electrical system maintenance.Perform lubrication and component servicing.Documentation & ComplianceRecord maintenance activities accurately in maintenance logs.Complete work orders, inspection reports, and service records.Ensure compliance with DGCA, FAA, EASA, and airline maintenance standards.Follow aircraft maintenance manuals and engineering procedures.Safety & Quality AssuranceFollow aviation safety regulations and company SOPs.Maintain a clean and organized work environment.Use Personal Protective Equipment (PPE) appropriately.Participate in safety audits and quality inspections.Report safety hazards and maintenance irregularities.Ground Support OperationsOperate aircraft servicing equipment and tools.Assist in aircraft towing and hangar operations.Coordinate with engineers, technicians, and flight operations staff.Support aircraft turnaround activities when required.Required SkillsAircraft maintenance and inspection knowledge.Mechanical and electrical troubleshooting skills.Knowledge of aircraft systems and components.Ability to read technical manuals and engineering drawings.Familiarity with aviation regulations and safety procedures.Problem-solving and analytical skills.Teamwork and communication abilities.Attention to detail and accuracy.Computer literacy and maintenance software knowledge.Educational QualificationsEssentialDiploma or Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Mechanical Engineering, or related field.PreferredDGCA-approved AME course.Aircraft Type Training Certification.Aviation maintenance certifications.Experience RequirementsFresherBasic knowledge of aircraft maintenance procedures.Practical training or apprenticeship experience preferred.Experienced1-5+ years of aircraft maintenance experience.Experience on commercial, cargo, or private aircraft.Knowledge of aircraft maintenance documentation systems.Working ConditionsAirport, hangar, workshop, and maintenance facilities.Rotational shifts including nights, weekends, and holidays.Exposure to aircraft noise and outdoor weather conditions.Physical work involving lifting, climbing, and working in confined spaces.Salary Range (India)Fresher: 25,000 - 30,000 per month1-3 Years Experience: 30,000 - 50,000 per month3-5 Years Experience: 50,000 - 80,000 per monthLicensed/Highly Skilled Technicians: 80,000+ per month

Job SummaryThe Avionics Engineer is responsible for the design, development, testing, installation, and maintenance of aircraft electronic systems. This role ensures safe, efficient, and compliant operation of avionics equipment including communication, navigation, surveillance, and flight control systems. The engineer works closely with cross-functional teams to support system integration, troubleshooting, upgrades, and continuous improvement in aviation technology. Key ResponsibilitiesDesign & Development:Design, develop, and integrate avionics systems for aircraft and aerospace applications.Create system schematics, wiring diagrams, and interface control documents.Develop embedded software or hardware for avionics components.Testing & Troubleshooting:Conduct system testing, validation, calibration, and verification to ensure performance standards.Diagnose issues in avionics equipment using testing tools and propose corrective actions.Perform root cause analysis for system failures and implement preventive measures.Installation & Integration:Oversee installation and configuration of avionics systems in aircraft.Ensure seamless integration of avionics with electrical, mechanical, and flight control systems.Coordinate with manufacturing, maintenance, and flight operations teams for system implementation.Compliance & Documentation:Ensure compliance with aviation authorities (FAA, EASA, DGCA) and safety standards.Prepare technical reports, maintenance manuals, and certification documentation.Maintain accurate documentation of design changes, test results, and system configuration.Maintenance & Support:Support maintenance teams in periodic inspections, upgrades, repairs, and system checks.Provide engineering support for aircraft modifications, retrofits, and new product introductions. Required Skills & CompetenciesTechnical Skills:Strong knowledge of communication, navigation, surveillance, autopilot, and flight control systems.Expertise in embedded systems, digital/analog electronics, and circuit design.Hands-on experience with avionics protocols (e.g., ARINC 429, MIL-STD-1553, CAN bus).Proficiency in tools such as MATLAB/Simulink, LabVIEW, PSPICE, Altium, Xilinx, or similar.Knowledge of aviation standards DO-178C, DO-254, RTCA, FAA/EASA guidelines.Soft Skills:Analytical and problem-solving ability with strong attention to detail.Effective communication, teamwork, documentation, and time-management skills.Ability to work under pressure and meet strict deadlines. Education & Experience RequirementsBachelors degree in Avionics Engineering, Aerospace Engineering, Electronics & Communication, Electrical Engineering, or related field.(Preferred) Masters degree in Avionics or related specialization.Experience:Entry Level: 02 yearsMid-Level: 37 yearsSenior: 8+ years in avionics engineering or related aerospace domain Work EnvironmentMay require working in aircraft hangars, manufacturing facilities, laboratories, or test sites.Willingness to travel for project support, testing, and system installation.Must adhere to aviation safety regulations and workplace safety protocols. Job Type & CompensationFull-time / PermanentCompetitive salary based on experience and qualificationsBenefits: Health insurance, travel allowance, training & professional development

We have vacant of 42 Urgent Hiring of Aircraft Maintenance at Airports Jobs in Mumbai, Kolkata, Goa, Visakhapatnam, Trivandrum/Thiruvananthapuram, Kozhikode/Calicut, Chennai, Kannur, Mangalore, Surat, for Freshers Educational Qualification : I.T.I., B.C.A, B.B.A, B.E, B.Tech, Other Bachelor Degree, Post Graduate Diploma, M.Tech, Integrated PG, Any Master Degree Skill Aircraft Maintenance, Aeronautical Engineer, Aviation, Aircraft Engineer, Aircraft Maintenance Engineer, Aircraft Technician, Electrical Engineer, Mechanical Engineer, Civil Engineer, Site Engineer, Project Engineer, Avionics etc.

Aircraft Maintenance professionals are responsible for inspecting, repairing, and maintaining aircraft systems to ensure safety, airworthiness, and compliance with aviation regulations. They work on airframes, engines, electrical systems, and avionics. Key Responsibilities1. Inspection & MaintenanceConduct routine inspections before and after flightsPerform scheduled maintenance (A-check, B-check, C-check, D-check)Diagnose mechanical and technical faults2. Repair & TroubleshootingRepair or replace defective aircraft componentsTroubleshoot engine, hydraulic, and electrical issuesUse diagnostic tools and maintenance manuals3. Testing & Quality ControlTest aircraft systems after maintenanceEnsure all systems meet safety standardsPerform functional and operational checks4. DocumentationMaintain accurate maintenance logs and recordsEnsure compliance with aviation authoritiesReport defects and corrective actions5. Safety ComplianceFollow strict aviation safety regulationsUse proper tools and protective equipmentEnsure aircraft meets airworthiness standards Types of Aircraft MaintenanceLine Maintenance - Routine checks at airportsBase Maintenance - Major repairs in hangarsPreventive Maintenance - Scheduled servicingCorrective Maintenance - Fixing faults/issues Education & QualificationsDiploma/Degree in Aircraft Maintenance Engineering or Aerospace EngineeringCertification from aviation authorities like:DGCA IndiaFAAEASAAME License (mandatory for certifying engineers) Required SkillsStrong technical and mechanical knowledgeAttention to detailProblem-solving abilityKnowledge of aircraft systems and toolsAbility to work under pressureGood communication and teamwork Tools & Equipment UsedDiagnostic testing equipmentHand and power toolsAircraft maintenance softwareTechnical manuals and blueprints Working ConditionsShift-based work (including nights and weekends)Work in hangars, airports, or outdoor environmentsPhysically demanding (lifting, climbing, bending)Exposure to noise and chemicals Career OpportunitiesAircraft Maintenance TechnicianLicensed Aircraft Maintenance EngineerQuality InspectorMaintenance SupervisorMRO SpecialistTop aviation employers include airlines, defense organizations, and companies like Air India, IndiGo, and SpiceJet. Salary (India Approx.)Fresher: 2.5 - 4 LPAExperienced: 5 - 12+ LPALicensed AME: 10 - 25+ LPA