Quality Control Engineer Jobs in India

Key Responsibilities1. Quality Assurance Develop, implement, and monitor Quality Assurance and Quality Control procedures forwater tanks, grain silos, and fabricated steel products. Ensure compliance with applicable IS / ASTM / ISO standards, fabrication codes, andcustomer specifications. Prepare Inspection & Test Plans (ITP), SOPs, quality checklists, and processdocumentation. Monitor incoming raw materials including steel sheets, fabricated parts, fasteners, andcoatings for quality standards.2. Quality Control Conduct stage-wise inspections during Sheet Cutting, Rolling / Bending, Welding /Fabrication, Surface Treatment / Galvanization / Coating, Assembly & Final Dispatch. Perform dimensional checks, fit-up inspections, welding inspections, coating thicknessverification, and leak / structural tests. Ensure product quality at each stage and coordinate with production teams forcorrective actions.3. Compliance & Documentation Maintain Material Test Certificates (MTC), Inspection Reports, NCR (Non-ConformanceReports), and CAPA (Corrective & Preventive Actions). Support internal, external, and third-party audits. Ensure implementation of ISO standards and quality management systems.4. Vendor Quality & Process Improvement Conduct supplier and vendor quality evaluations. Minimize rejection, rework, and customer complaints through process improvementinitiatives. Train production teams on quality standards and best practices.Educational QualificationB.Tech / B.E. in Mechanical Engineering (Mandatory)Experience RequiredMinimum 4-5 years of relevant QA/QC experience in Water Storage Tank Manufacturing,Grain Storage Silos, Steel Fabrication / Heavy Engineering / Mechanical Manufacturing.Preferred Certifications ISO 9001 Internal Auditor / Lead Auditor Welding Inspection Certification NDT Level II Certification Quality Management CertificationsRequired Skills Mechanical drawings & technical interpretation Welding inspection & fabrication quality Knowledge of QA/QC documentation Root Cause Analysis & CAPA Vendor audit & supplier quality management Inspection tools & measuring instruments MS Excel & reportingKey Competencies Strong analytical ability Attention to detail Leadership & coordination skills Problem-solving mindset Ability to work under manufacturing deadlines

We are seeking a dedicated Civil Site Engineer with 1 to 4 years of experience to join our team in Pune, India. The ideal candidate will have a diploma in Civil Engineering and a strong commitment to delivering quality work on site.Key Responsibilities:- **Site Supervision**: Oversee daily site operations, ensuring that construction activities are executed as per design specifications and safety standards.- **Project Coordination**: Collaborate with architects, contractors, and other engineers to ensure seamless communication and coordination throughout the project.- **Quality Control**: Conduct regular inspections and quality checks to ensure that materials and workmanship meet project quality standards.- **Progress Reporting**: Maintain accurate records of work progress and report any issues or delays to management promptly.Required Skills and Expectations:The successful candidate should possess a solid understanding of construction processes and techniques, with technical knowledge applicable to civil engineering. Strong problem-solving skills and the ability to work in a team environment are essential. Effective communication skills are critical for liaising with various stakeholders on-site. A proactive attitude towards learning and improving processes will be highly appreciated, along with a commitment to adhering to safety regulations and maintaining a clean, organized work environment. Male candidates are preferred for this role.

Production Engineer manages and optimizes the manufacturing of precision electric motors and motion control solutions. This involves tracking operational efficiency, allocating manpower, ensuring quality control, and driving continuous shop-floor improvements.Key Responsibilities:-Production Planning: Allocate manpower, balance assembly lines, and plan daily/weekly schedules to meet delivery commitments. Efficiency Monitoring: Track operation cycle times, identify production bottlenecks, and minimize machine downtime. Data Analysis: Record and analyze daily production data, specifically monitoring output, rework, scrap, and rejection rates. Quality Control: Ensure all manufactured parts meet strict engineering tolerances and standard operating procedures (SOPs).Shop-Floor Management: Enforce 5S, safety protocols, and waste reduction methods. Maintenance: Coordinate preventive and breakdown maintenance for production machinery. Cross-Functional Coordination: Collaborate with the Quality, Stores, and Maintenance departments to maintain a smooth production flow.Candidate Requirements Education: Diploma or B.E./ B.Tech in Mechanical or Production Engineering. Experience: Typically ranges from 2 to 8 years in the manufacturing sector, with some entry-level roles available. Technical Skills: Hands-on experience with CNC machines, plastic moulding, machine shops, and manufacturing operations. Continuous Improvement: Familiarity with lean manufacturing tools such as Kaizen, Poka-Yoke, and waste elimination

We are seeking a Production Quality Engineer with 2 to 7 years of experience to ensure our products meet high-quality standards in our Jaipur office. The ideal candidate will have a strong educational background and a passion for quality in manufacturing.Key Responsibilities:- **Quality Control**: Monitor production processes to identify any issues that may affect product quality. This involves regular inspections and testing to ensure compliance with standards.- **Process Improvement**: Analyze production data to find areas where processes can be optimized. Propose and implement changes that enhance efficiency and reduce defects in the manufacturing process.- **Collaboration**: Work closely with production teams and other departments to resolve quality-related issues. Effective communication is essential to ensure everyone is aligned on quality goals.- **Documentation**: Maintain accurate records of inspections and quality checks. This includes reporting findings and providing recommendations for improvements based on data analysis.- **Training**: Educate staff on quality control procedures and best practices. This involves creating training materials and sessions to ensure that everyone understands their role in maintaining quality standards.Required Skills and Expectations:Candidates must have a degree in engineering or a related field. Strong analytical skills are essential to assess quality metrics and make data-driven decisions. Excellent communication and teamwork abilities are crucial, as the role involves working with various teams. Finally, a keen eye for detail and problem-solving skills will help drive continuous improvement in the production process.

ROLE OVERVIEWThe Quality Control Engineer will be responsible for incoming material inspection, in-process quality checks, and finished laminate testing across the CCL manufacturing plant. This role requires deep familiarity with IPC standards, raw material specifications, and laminate test procedures.KEY RESPONSIBILITIESIncoming Material Inspection- Inspect and qualify incoming glass fabric: weave style, GSM, thickness, width, defects (filling breaks, knots, weave distortions)- Test incoming ED copper foil: thickness (oz/m), surface quality, oxidation, bond strength- Inspect prepreg for resin content, flow, gel time, and volatile content- Maintain raw material test records and release/rejection documentationIn-Process Quality Control- Monitor treater line output: resin pickup %, volatile content, and prepreg flow characteristics- Check dimensional parameters during press operation: thickness tolerance, bow, twist- Track press cycle parameters and correlate with quality outcomesFinished Laminate Testing- Conduct peel strength testing per IPC-TM-650 methods- Perform Tg measurement using DSC (Differential Scanning Calorimetry) or TMA- Measure dielectric constant (Dk) and dissipation factor (Df) per IPC standards- Conduct thermal stress testing (solder float / thermal shock) for reliability evaluation- Test surface finish, dimensional accuracy, and appearance inspection of finished laminatesSystems & Documentation- Maintain quality records, SPC charts, COA (Certificate of Analysis), and NCR logs- Drive corrective and preventive actions (CAPA) for recurring defects- Support customer audits, IPC conformance documentation, and lab accreditation activitiesCANDIDATE PROFILEExperience- 3-10 years in quality control in CCL, PCB, composites, or laminates manufacturing- Hands-on lab testing experience with laminate and copper foil characterisation- Working knowledge of IPC standards (IPC-4101, IPC-TM-650 test methods)Technical Skills- Proficiency with instruments: DSC, TMA, peel tester, LCR meter, impedance analyser- Knowledge of glass fabric weave classifications and defect identification- Familiarity with UL 94, IPC-4101C, and halogen-free laminate standards- Experience with SPC tools and quality management systems (ISO 9001)Education- B.E. / B.Tech in Chemical, Polymer, Electronics, or Materials EngineeringCritical Requirement: Must be familiar with: IPC-4101 laminate specifications, IPC-TM-650 test methods, and standard lab procedures for peel, Tg, Dk/Df, and thermal stress testing.REPORTING & LOCATIONReports To Plant Head / QA ManagerLocation Plant Site / QC Lab, India

We are seeking an experienced Construction Manager in Civil Engineering to oversee and manage construction projects in Bangalore. This role requires strong leadership skills and a commitment to ensuring projects are completed on time and within budget.Key Responsibilities:1. **Project Planning**: Develop detailed project plans that outline various phases of construction and timelines to ensure smooth execution from start to finish.2. **Team Management**: Lead and coordinate a team of engineers, workers, and subcontractors, ensuring clear communication and collaboration among all members for efficient workflow.3. **Quality Control**: Monitor work quality on-site to ensure all construction meets industry standards and regulations. Conduct regular inspections to identify any issues requiring immediate attention.4. **Budget Management**: Oversee project budgets, tracking expenses and resources to ensure costs remain within approved limits while efficiently allocating funds to different project needs.5. **Safety Compliance**: Implement and monitor safety measures and protocols to maintain a safe working environment for all staff, ensuring adherence to health and safety regulations.

We are looking for a Fabrication Engineer with 5 to 7 years of experience to join our team in Jhajjar. The ideal candidate will have a strong background in fabrication processes and technologies, along with a relevant educational qualification such as a Post Graduate Diploma, M.C.H., or M.Tech. The position is full-time and requires on-site presence in the office.**Key Responsibilities:**- **Design and Development**: Create and improve fabrication designs to enhance product efficiency and quality.- **Process Optimization**: Analyze existing fabrication processes and recommend improvements to minimize waste and reduce costs.- **Material Selection**: Identify and select appropriate materials for projects to ensure durability and performance.- **Quality Control**: Implement and oversee quality control procedures during the fabrication process to meet industry standards.- **Project Coordination**: Work closely with project managers and other engineers to ensure fabrication aligns with project timelines and specifications.- **Troubleshooting**: Identify and resolve technical issues that arise during the fabrication process to ensure smooth operations.- **Documentation**: Maintain accurate records of fabrication processes, materials used, and any modifications made during projects.The successful candidate will possess strong analytical skills, attention to detail, and the ability to work collaboratively in a team. Strong communication skills are essential for effectively communicating ideas and project requirements. Practical knowledge of CAD software and fabrication technologies will be crucial in this role. The candidate should also be able to manage multiple projects efficiently while adhering to deadlines.

Develop and implement quality assurance and quality control procedures for construction projects. Inspect materials, workmanship, and completed work to ensure compliance with specifications and standards. Prepare and maintain QA/QC documentation, reports, and checklists. Coordinate with site engineers, project managers, and consultants on quality-related issues . Conduct site audits and internal inspections. Ensure compliance with safety and quality regulations. Identify non-conformance issues and implement corrective actions. Monitor testing of materials (concrete, steel, etc.) and maintain records. Review drawings and specifications for quality requirements. Assist in client inspections and third-party auditsRequirements: Bachelors degree in Civil Engineering or related field 1-5 years of experience in QA/QC in construction/infrastructure projectsKnowledge of quality standards, IS codes, and testing procedures Strong documentation and reporting skills Familiarity with MS Excel and quality management systemsGood communication and problem-solving skills.

1. QC Documentation and Coordination EngrLocation - Ambernath East / Anand Nagar MIDCSalary (gross) - Rs 2 to 3 lakhs pa Sundays offRequiredDiploma/ BE with min. 2 years experience in QC, Inspection, Production coordination in similar static process industriesNDT ASNT Level I or II certification essentialPractical experience and knowledge of ASNT codesProficient in MS Office (Word and Excel)Job profile: Prepare/Organise/maintain complete Documentation and Dossier of Equipments with respect to Material heat chartPrepare lab challans and follow up with technical queries with Sub-vendor/Job Worker and Customers.Checking incoming materials, vendor product bought out items and inform its result/report to store and purchase dept. and clear the MRN in timeTo carry out in-process inspection according to procedures and as per approved drawing. Prepare report and raise inspection callMaintaining all the records of TPI reports, Internal IR, Material Test Certificates, etc Update & maintain online/offine Material Register/ RT Register Day to day follow up with lab and any other supplier related to technical discussionOrganise and maintain lab/RT ReportHandle emails correspondence with Sub-vendors/customers etc.2. ENGR / SR ENGINEER - QC Location- Rabale MIDC Salary (gross) - Rs 3 to 4.2lakhs (in hand 25000 to 38000 pm) Sundays offRequiredDiploma/ BE with min. 5 years experience in similar industriesNDT ASNT Level II essentialCapable of handling QA/ QC dept independentlyAge profile- 28 years and aboveBoth cos are established and reputed mfrs / fabricators of static process equipmentProducts - pressure vessels, heat exchangers, storage tanks, reactors, columns etc_____________________If interested, pl mail or whatsapp (9820824647) following details immediately ..1. Updated Resume2. Present/ last salary3. Reasonable expected salary4. Willing to travel to/ work at Ambernath/ Rabale5. Joining period Mail or whatsapp details to 9820824647________________________Further details will follow as per your response with details as aboveCall/ contact urgentlySHOBANARank & File consultants9820824647

Position #1:QUALITY ENGINEER / SR ENGINEERLocation: Rabale MIDCProducts fabricated - FRP based static equipment like storage tanks, pollution control equipment, pipes & fittings, process reaction vessels, etcWeekly off - Sundays Salary - Rs 25000 to 40000 pm gross (23000 to 38000 in hand)Accommodation is not providedREQUIRED:Diploma/ Graduate Engr with min. 3 years experience in Quality in similar static process equipment fabrication industriesGood knowledge of QC of incoming, process qualityGood knowledge of testingNDT Level II certificate required ________________________________________________________Position#2SR QUALITY ENGINEER (HOD)Location - Ambernath East, Anand Nagar MIDCProducts fabricated - static equipment pressure vessels, reactors, heat exchangers, columns, tanks etcWeekly off - Sundays offSalary - Rs 25000 to 35000 pm gross (23000 to 32000 in hand)Accommodation - Not providedREQUIRED:Diploma/ Graduate Engr with min. 10 years experience in similar static process equipment industryPractical knowledge and experience of all relevant tests and standards as per ASNT codes.Basic / practical knowledge of AutoCADNDT Level II certificate essentialAble to lead a team_______________________________________________________Kindly respond with following details urgently if interested1. UPDATED RESUME2. PRESENT SALARY (in hand)3. DECENT SALARY EXPECTATION4. PREFERENCE OF LOCATIONS5. EARLIEST JOINING DATEMail or whatsapp to 9820824647Both cos. are established engineering firms with good work environment and scope for learning and growth.Call / contact immediatelySHOBANARank & File consultants9820824647

Post - Site EngineerQualification - Diploma / B.Tech/ BE CivilExperience - 1 to 4 yearLocation - Surat Salary - 25,000 to 42,000 CTCSite - ConstructionDuty - 10 to 12 hours/ 26 daysAccommodation Available Role & responsibilities;1. Monitor day-to-day site activities and ensure smooth execution of work.2. Identify operational issues and implement effective solutions to improve productivity.3. Coordinate with cross-functional teams for project planning and execution.4. Supervise site work while maintaining quality and safety standards.5. Support project coordination, reporting, and timely completion of tasks.

As a Mechanical Engineer, you will be responsible for designing, testing, and implementing mechanical systems and processes. Your key responsibilities will include conducting research, analyzing data, developing prototypes, and collaborating with cross-functional teams to ensure the efficiency and reliability of mechanical systems. You will be expected to possess strong technical skills in areas such as thermodynamics, fluid mechanics, and materials science. Proficiency in CAD software and experience in designing mechanical components will be essential. Additionally, you should have excellent problem-solving abilities, attention to detail, and the ability to work well under pressure. Effective communication skills and the ability to work collaboratively with a team are also important in this role.The ideal candidate will have 1-4 years of experience in a similar role and possess at least a 12th Pass education. This position is open to male candidates and requires full-time availability for work from the office in Gurgaon, India.

We are seeking an experienced Senior Design Engineer to join our team in Greater Noida. The ideal candidate will have 8 to 10 years of relevant experience and a diploma in engineering. Key Responsibilities:- **Design Development**: Create and develop detailed design solutions for engineering projects, ensuring they meet functionality and performance standards.- **Collaboration**: Work closely with cross-functional teams, including production and quality assurance, to ensure designs can be efficiently manufactured and meet quality specifications.- **Technical Review**: Conduct thorough reviews of design concepts and make necessary revisions based on feedback, ensuring all designs are compliant with industry standards.- **Project Management**: Oversee multiple projects simultaneously, monitoring timelines and ensuring milestones are met while adhering to budget constraints.- **Documentation**: Maintain accurate records of design specifications, changes, and approvals, providing comprehensive documentation for each project.Required Skills and Expectations:The ideal candidate should possess strong technical skills in design software such as AutoCAD and SolidWorks. A solid understanding of materials and manufacturing processes is essential. Candidates should have excellent problem-solving abilities and be able to think critically to develop innovative design solutions. Strong communication skills are required to effectively collaborate with team members and stakeholders. A proactive approach towards project challenges and the ability to work independently in a fast-paced environment are key expectations for this role.

As a Graduate Trainee Engineer, you will be responsible for assisting senior engineers in various projects and learning the ropes of the engineering field. Your key responsibilities will include conducting research, analyzing data, assisting in the design and testing of prototypes, and providing technical support. To excel in this role, you must have a graduate degree in engineering or a related field. Strong analytical skills, attention to detail, and problem-solving abilities are essential. You should also have a good understanding of engineering principles and techniques. Excellent communication skills and the ability to work independently and as part of a team are also important for this position. Overall, as a Graduate Trainee Engineer, you will have the opportunity to gain hands-on experience and develop your skills in a supportive and collaborative work environment.

As a Graduate Trainee Engineer, you will be responsible for learning and assisting in various engineering tasks. Your key responsibilities will include shadowing experienced engineers, participating in training sessions, and completing assigned tasks accurately and on time. You will need to possess strong analytical skills, attention to detail, and the ability to work both independently and collaboratively. A solid understanding of engineering principles and a willingness to learn and grow in a fast-paced environment are essential for this role. A degree in engineering or a related field is required.

As a Diploma Mechanical Engineer, you will be responsible for providing technical support and hands-on assistance in various stages of our operations, which may include production supervision, quality inspection, machine maintenance, or assisting in design and development. You will work closely with senior engineers and technicians to ensure efficient processes, adherence to quality standards, and smooth daily operations. This role is ideal for diploma holders eager to gain practical industry experience and grow their mechanical engineering expertise.ResponsibilitiesOperational Support:Assist in supervising daily production activities, ensuring adherence to schedules and production targets.Monitor machine performance, identify minor faults, and support troubleshooting activities.Ensure proper utilization of tools, equipment, and raw materials.Implement and follow Standard Operating Procedures (SOPs) for various tasks.Quality Control & Inspection:Conduct quality checks on raw materials, in-process components, and finished products using various measuring instruments (e.g., Vernier calipers, micrometers, gauges).Identify and report defects or non-conformities, assisting in initial root cause analysis.Ensure adherence to drawing specifications and quality standards.Maintenance Assistance (if applicable):Assist in preventive and breakdown maintenance of machinery and equipment.Support the assembly and installation of mechanical components or systems.Maintain records of maintenance activities and spare parts usage.Documentation & Reporting:Accurately record production data, quality inspection results, and maintenance logs.Prepare basic reports on daily activities, production output, and identified issues.Maintain organized technical documents, drawings, and records.Safety & Compliance:Strictly adhere to all company safety policies and procedures, promoting a safe working environment.Ensure compliance with environmental regulations and quality management systems (e.g., ISO 9001).Technical Drawing & CAD (if applicable):Read and interpret engineering drawings, blueprints, and schematics.Assist in making minor modifications to existing drawings using CAD software (e.g., AutoCAD, SolidWorks - basic level).Team Collaboration:Collaborate effectively with cross-functional teams, including production, quality, maintenance, and design departments.Actively participate in problem-solving discussions and improvement initiatives.

We are seeking a skilled Civil Engineer to join our team in Visakhapatnam. The ideal candidate will have 2 to 8 years of experience and a strong educational background in civil engineering. This full-time position requires a proactive approach to design, construction, and project management.**VISIT BHADANIS QUANTITY SURVEYING WEBSITE**Key Responsibilities:**VISIT BHADANIS QUANTITY SURVEYING WEBSITE**1. 1. Project Quantity Surveying: QS & Estimation , Billing ,Planning , Tendering , Contracts , Cost Control Budgeting2. **Site Supervision**: You will oversee construction activities on-site, monitoring progress and ensuring that work adheres to design specifications and safety regulations.3. **Quality Control**: Conducting regular inspections and tests will be part of your role to ensure materials and workmanship meet the required quality standards.4. **Problem-Solving**: You will identify and resolve any issues that arise during project execution, providing innovative solutions to maintain project timelines.Required Skills and Expectations:Candidates should have a degree in civil engineering and practical experience in construction or site management. Strong analytical and problem-solving skills are essential. Proficiency in CAD software and other engineering tools is required. Excellent communication skills will help you work effectively with teams and clients. You should be detail-oriented and committed to delivering high-quality work while adhering to safety regulations.

We are looking for a Civil Engineer to join our team in Bangalore. The ideal candidate should have 2 to 8 years of experience in civil engineering projects. This is a full-time office-based position, where you will contribute to various construction and infrastructure developments.**VISIT BHADANIS QUANTITY SURVEYING WEBSITE**Key Responsibilities:**VISIT BHADANIS QUANTITY SURVEYING WEBSITE**1. 1. Project Quantity Surveying: QS & Estimation , Billing ,Planning , Tendering , Contracts , Cost Control Budgeting2. Site Management: You will oversee construction sites to ensure that projects are completed on time and within budget. You will coordinate with contractors and monitor work progress.3. Quality Control: You will implement quality control measures to ensure that all materials and work meet industry standards and safety regulations.4. Cost Estimation: You will be involved in estimating costs for projects, including materials, labor, and equipment, to help maintain budget accuracy.5. Collaboration: You will work closely with architects, surveyors, and other engineers to ensure project requirements are met and to resolve any issues that arise during construction.Required Skills and Expectations:Candidates must have a degree in Civil Engineering and demonstrate strong technical knowledge and proficiency in engineering software such as AutoCAD. Excellent communication and teamwork skills are essential for collaborating with various stakeholders. Additionally, candidates should be detail-oriented and possess problem-solving abilities to address challenges in the design and execution of projects.

We are looking for a dedicated Civil Engineer to join our team in Gurgaon, India. The ideal candidate will have 2 to 8 years of experience and a strong educational background in civil engineering. This full-time position requires working from the office.**VISIT BHADANIS QUANTITY SURVEYING WEBSITE**Key Responsibilities:**VISIT BHADANIS QUANTITY SURVEYING WEBSITE**- **Design and Planning**: Develop detailed engineering plans and drawings for construction projects. Analyze site conditions and produce designs that meet safety and regulatory standards.- **Project Management**: Oversee construction projects from start to finish. Ensure that projects are completed on time, within budget, and to the desired quality.- **Site Inspections**: Conduct regular inspections of construction sites to monitor progress and quality. Identify any issues and recommend solutions to ensure project compliance.- **Collaboration**: Work closely with architects, contractors, and other stakeholders. Communicate effectively to ensure all parties are aligned and informed throughout the project lifecycle.- **Technical Support**: Provide technical assistance and support to team members and clients. Address any engineering-related queries and provide solutions to challenges that arise.Required Skills and Expectations:The ideal candidate should possess strong analytical skills and attention to detail. Proficient knowledge of engineering software such as AutoCAD or Civil 3D is essential. Excellent communication and teamwork abilities are vital, along with a proactive approach to problem-solving. Candidates should be able to manage multiple projects efficiently and adapt to changing demands. A strong understanding of local building codes and regulations is necessary.

RESPONSIBILITY : setting and tool selection. Operationand output. Manpower handling Shift handling Drawing reading Documentation knowledge 7 qc tools Rejection analysis and rejection control Machine OEE Maximize productivity of machinery and workers Assess and anaiyze current production method Good knowledge of welding process.

Quality Control,Site Engineering,Construction Material Quality Chek,