Jobs in Oragadam, Kanchipuram

Greeting From Vishakan Placement Service!!! Hiring Senior Process Operator Position: Junior Process Operator - E-Waste Chemical RecoveryDepartment: Production / Process OperationsIndustry: E-Waste Chemical RecoveryOnly Experience: 2-4 years in chemical/process plants, metal recovery, e-waste recycling or related industries; freshers may be considered.Qualification: ITI /Any Diploma /B.E Chemical Engineering, B.E Mechanical Engineering & Bsc. Chemistry background preferred.Shift Timing: 8 Hrs Rotational 1- Rotational Week-Off Reports To: Shift In-Charge / Production SupervisorJOB DESCRIPTION - Sr.PROCESS OPERATOR1. Operate e-waste recycling process equipment as per SOP and instructions from the Process Controller/Supervisor.2. Receive, prepare, and charge raw materials into designated tanks/reactors as per batch requirements.3. Verify raw-material quantity, batch number, tank number, and charging sequence before operation.4. Handle and charge process chemicals safely as per approved SOP and required quantities.5. Operate tanks, reactors, agitators, pumps, valves, filters and related process equipment.6. Monitor process parameters such as pH, temperature, tank level, pressure, flow, and process time.7. Carry out tank-to-tank material transfer and ensure correct pipeline and valve alignment.8. Operate filtration equipment and monitor filtration flow, pressure, and performance.9. Collect, handle, and transfer filter cake/solid material without batch contamination.10. Perform routine inspection of tanks, pumps, filters, pipelines, valves, and other equipment.11. Report equipment breakdowns, leaks, spills, abnormal reactions, or process deviations immediately.12. Take process samples and maintain required process and production records.13. Maintain accurate records of raw materials, chemicals, production quantities, filtration, and material transfers.14. Follow all safety procedures, PPE requirements, chemical-handling practices, and housekeeping standards.15. Support the Process Controller/Supervisor in achieving safe, efficient, and continuous production.Fixed Salary:25 K - 35 K CTC + ESI+ PF + Medical Insurance Overtime (OT) Policy - OT eligibility and applicable OT rates 1.5 TimesAllowances - attendance allowance, Chemical AllowancesCab / Transportation Facility - based on the timing and pick up from dedicated pointsAccommodation - Near Kandigai / Oragadam ( Company Provided)Food Facility / Meal Allowance - BF, Lunch and Dinner based shift basis and We provided on subsidy for the foodNo of openings: 40Male candidate only Age limit: Till 35Interview Process: HR Round-Technical Round Immediate Joiner Must Work Location:, Oragadam, Ezhichur Village(Sriperumpudur Taluk,Kanchipuram(DT) - 603204)If Candidate Interested For Job Please Call Immediately & share your Cvs Call/Whatsapp: Vishakan Placement Service HR Pradeep

We are looking for the Office Assistant post who are Hardworking and disciplined person

As an Electrical Design Engineer, you will play a crucial role in designing and developing electrical systems. This position is best suited for candidates with 1 to 3 years of experience in electrical design and a Bachelors degree in Engineering (B.E).Key Responsibilities:- Design Electrical Systems: Create detailed designs for electrical systems, ensuring they meet project requirements and industry standards.- Conduct Simulations: Use software tools to run simulations on electrical components and systems to foresee their performance in real-world applications.- Collaborate with Teams: Work closely with cross-functional teams, including mechanical engineers and project managers, to ensure integrated system designs.- Prepare Technical Documentation: Generate and maintain documentation of designs, specifications, and testing protocols for future reference and compliance.- Troubleshoot Issues: Identify and resolve any design or operational issues in existing electrical systems to improve efficiency and performance.Required Skills and Expectations:Candidates should have a strong understanding of electrical engineering principles and practices. Proficiency in design software, such as AutoCAD or similar tools, is essential. The ability to work collaboratively in a team environment and communicate effectively with colleagues is expected. Analytical skills and attention to detail are crucial for troubleshooting and optimizing designs. Strong problem-solving abilities will aid in developing innovative solutions to overcome engineering challenges. Preference will be given to male candidates, and you must be willing to work on-site at the Oragadam location.

The Fork Lift Operator will be responsible for operating a forklift to move materials around a warehouse or storage facility. This includes loading and unloading trucks, organizing inventory, and safely maneuvering the forklift in tight spaces.Key Responsibilities:- Operate a forklift to move materials and products around the warehouse.- Load and unload trucks with the forklift in a safe and efficient manner.- Organize inventory and maintain storage areas.- Follow all safety protocols and guidelines when operating the forklift.Required Skills and Expectations:- Must have a valid forklift operator certification.- Ability to safely operate a forklift in a fast-paced environment.- Strong attention to detail and organizational skills.- Physical strength and ability to lift heavy objects.- Good communication skills and ability to work well in a team environment.

Assist in installation, testing, and maintenance of electrical systems and equipmentSupport senior engineers in electrical projects and site activitiesPerform basic troubleshooting of electrical panels, wiring, and equipmentRead and understand electrical drawings and schematicsMaintain records of maintenance, inspections, and work completedFollow safety rules and company procedures at all timesCoordinate with technicians and other departments as required

Strong knowledge of High Pressure Die Casting (HPDC) processAbility to operate HPDC machines (cold chamber / hot chamber)Understanding of machine parameters: pressure, speed, temperature, cycle timeBasic die & mold knowledge (die setting, clamping, alignment)Familiarity with alloys (Aluminium / Zinc / Magnesium)Basic troubleshooting of casting defects (porosity, cold shut, flash, short fill)

We are hiring DIPLOMA ,BE ,BTECH & any degeree completed( 2023-2025)Salary:17k-19.5kFree food and transportGender:male and female

Electrician Should have hands on experience;

Hiring Under NAPS SchemeDesignation: Trainee OperatorLocation : Oragadam, Chennai. Eligibility Criteria:Education: ITI / Diploma (Except CS & Civil)Gender: Male & FemaleAge: 18 to 30 years Department:Assembly Line, Production, Quality & Maintenance Job Location:Oragadam, Tamil Nadu Shift Timings (8 hrs):Shift A: 7:00 AM 3:30 PMShift B: 3:30 PM 12:00 AMShift C: 12:00 AM 7:00 AMWeek Off: Sunday Stipend:ITI / Diploma / Any Degree: 20,000/-B.E: 24,500/- Benefits:Free Transport (Up to 35 km from the company)Free Food (During duty hours)Accommodation Available (PG / Hostel)Transport from Company to HostelRetention Bonus: 12,000/- per year Transport Locations in local:Kanchipuram, Tiruvallur, Sriperumbudur, Poonamallee, Pallavaram, Tambaram, Chengalpattu

Job Openings for 30 CNC Machine Operator Jobs with minimum 1 Year Experience in Oragadam, Chennai, Oragadam, Kanchipuram, having Educational qualification of : Higher Secondary, I.T.I. with Good knowledge in CNC Turning, CNC Machines, CNC Milling, Milling etc.

As a Data Entry Operator, your main responsibility will be entering and updating data in databases and maintaining accurate records. You will also be responsible for ensuring data integrity and security.Key responsibilities include:- Entering data into databases and updating existing records- Verifying data for accuracy and completeness- Organizing and maintaining files and records- Handling sensitive and confidential information with integrity- Communicating effectively with team members and supervisors- Generating reports and providing data analysis as needed

Handle product with forklift. Should have LMV licence.

Key Responsibilities:Set up and configure VMC turning machines, ensuring proper tool selection, offsets, and cutting parameters.Read and modify VMC Setting & programs as needed to optimize machining processes while maintaining accuracy and efficiency.Inspect finished parts using measuring instruments (e.g., micrometers, calipers, gauges) to ensure compliance with specifications.Identify and resolve machine issues, conduct routine maintenance, and collaborate with maintenance teams for repairs.Follow safety protocols, maintain records of setup parameters, and ensure adherence to company quality standards.Requirements:Male candidates preferredDiploma/ITI in Mechanical Engineering or a related field.0-1 years of experience in VMC turning and VMC operations.Proficiency in reading technical drawings and using measuring instruments.Understanding of cutting tools, speeds, and feeds for various materials.Strong problem-solving skills and attention to detail.

ITI, Diploma in EEE, BE

Our Recruitment is Rushing up so grab it quickly to get a job within a week.Criteria:Qualification:DIP,BE/B.Tech MECH/EEE/ECE/ARTSDesignation: Graduate Engineer traineeRole: Quality / Production/Assembly/ maintenanceEligible batches: 2020-2025Work Location: Around ChennaiSalary: 18 to 25k+ OTShift : Rotational Shift/Food /transport and accommodation freeJob Type: Permanent & Full timeFor further details contact:Hedwell technologiesNo.2/6, Banu Avenue,Tambaram Sanatorium, Near by IOB BankChennai - 600 047

The Production Supervisor role requires practical knowledge of manufacturing process (welding, cold forming, machining, pressing), job assignment, planning and supervising to fabricate bellows, hoses, fittings, pressure vessels.This job is in Mechanical Engineering Domain with focus in Fabrication (Structural and Pressure part)The Engineer needs to be strong in reading engineering drawings to plan the sequence of manufacturing operationsThe Production supervisor needs to provide written instructions to workers for individual operations and monitor the job progress with respect to planned deliveryThe Production representative needs to record the work order progress and create production plans for customers when requestedThe Engineer needs to be able to generate cutting plans for steel sheets, plates, coils

programming and set up CNC to complete new products/different functionschange the tooling of the CNC machineObserve machine operation to verify accuracy of machine settings and to detect malfunctions or out-of-tolerance machining using precision measuring instruments such as a micrometer and dial caliper.adjust machine control, including part processverify first piece inspection using appropriate measuring instrumentsgenerally monitor the work being undertaken and completed, testing and taking agreed critical measurements to identify problems and the need for adjustment, etc, and to immediately make any adjustments as necessarypost-edit CNC programme to fine-tune process for optimum performanceundertake agreed CNC inspectionMaintain accurate data, records, and documentation associated with your workcarry out planned tasks in accordance with contracts/requirements on services and associated systemscarry out tasks within allotted time limitsensure compliance with quality standards, policies and procedures, codes and legislation, including health and safetyimmediately report problems/failures that may impact on the organisation and/or its clients/customers to the line manager.contribute towards the smooth running of the teamresponsibly use resources and control expenses to meet agreed budgetary controlsadhere to all organisation policies and procedures

Sales:1. Meet/Exceed monthly/quarterly sales targets.2. Identify, cultivate, and convert leads.3. Build relationships with customers.4. Negotiate and close deals.5. Provide customer support.Marketing:1. Develop and execute marketing strategies to reach target audiences.2. Manage social media presence/content.3. Collaborate on email marketing and promotional materials.4. Identify and explore new marketing channels.

Oil Fired IBR BoilerOperator will be deputed to Customer location on permanent basisCurrent Opening available at PondicherryOperate and Maintain IBR BoilerShift basis workResponsibilities and DutiesCheck log book readings and compare with actual working of the boiler. Take corrective action of any discrepancy and record action taken.Check if all safeties and controls are working satisfactorily.Observe if there are errors in the instruments and take appropriate action. If errors are minor in nature inform the operator of the error in the instrument. If the error is major, recommend replacement of the instrument.Check all the electrical components and connections, clean contacts and tighten all connections.Cleaning of tubes once in 15 daysEnsure Softener is maintainedMaintain log book of all parameters

Immediate Joining Openings for Diploma /iti /BE /Any degree Freshersdept: Production, Quality, Assembly,Production,Testingsalary: Upto 20klocations: Around Chennaiinterview Process: Hr Round Only,interview One day Process Immediate Joiningfood ,Transport & Accommodation Availableinterested Candidates Come with Your Resume& Certificate Xeroxhedwelll Technologies,no:2/6,Banu Avenue,tambaram Sanatorium,chennai-600047.

Recruitment is Rushing up so grab it quickly to get a job within a week.Criteria:Qualification:DIP, B E/B Tech(ECE/EEE/MECH)Designation: Graduate Engineer traineeRole: Quality / ProductionEligible batches: 2019 to 2024Work Location: Around ChennaiSalary:15 to 20 + OTShift : Rotational ShiftJob Type: Permanent & Full timeFood and cab Facilities are providedHedwell technologiesNo2/6 Banu Avanue, Tambaram sanatorium, Chennai 47...near by IOB bank.. Railway station back side...

Need Diploma / Any degree female freshers Criteria:Qualification:Diploma/Any degree(ECE/EEE/MECH)Designation: Graduate Engineer traineeRole: Quality / ProductionEligible batches: 2019 to 2023Work Location: Around ChennaiSalary: 15 to 20k+ OTShift : Rotational ShiftJob Type: Permanent & Full time

highly skilled Electronics & Telecommunication Engineer with expertise in circuit design, embedded systems, wireless communication, and signal processing. Proficient in VLSI, IoT, automation, and power electronics, with hands-on experience in microcontrollers (Arduino, Raspberry Pi, ARM), FPGA programming (Verilog, VHDL), and telecommunication technologies (4G, 5G, RF, Optical Fiber). Strong knowledge of network protocols, troubleshooting electronic systems, and industrial automation (PLC, SCADA, HMI). Adept at problem-solving, teamwork, and project management, ensuring efficient system design and optimization.

Greeting From Vishakan Placement Service !!! Hiring Junior Process Operator Technician (Fresher Graduate)Position: Junior Process Operator Technician - E-Waste Chemical RecoveryDepartment: Production / Process OperationsIndustry: E-Waste Chemical RecoveryShift Timing: 8 Hrs Rotational 1- Rotational Week-Off Reports To: Shift In-Charge / Production SupervisorJD:Handle and charge processed e-waste/raw materials into leaching tanks as per SOP and batch requirements.Handle process chemicals safely and follow approved chemical addition procedures.Operate leaching tanks, agitators, pumps, valves and chemical dosing systems.Monitor and record process parameters such as pH, temperature, level, time and agitation.Operate filter press/filtration equipment and handle slurry and filtrate safely.Collect, segregate, weigh and transfer sludge/filter cake/residues to designated areas.Assist in metal recovery processes such as precipitation, cementation or electrowinning as per SOP.Collect process samples and coordinate with QC/Lab for analysis.Maintain batch sheets, chemical consumption, production, recovery and shift records.Perform basic equipment checks and immediately report leaks, blockages, breakdowns or abnormalities.Follow PPE, EHS, chemical handling, LOTO and emergency procedures at all times.Maintain good housekeeping, 5S and cleanliness around the process area.Qualification: ITI / Diploma / 12th Science; B.E Chemical Engineering, B.E Mechanical Engineering & Bsc. Chemistry background preferred.Experience: 0-4 years in chemical/process plants, metal recovery, e-waste recycling or related industries; freshers may be considered.Key Skills: Safety awareness, SOP compliance, basic chemical/process knowledge, teamwork, documentation and willingness to work in shifts.Fixed Salary:20 K CTC + ESI+ PF + Medical Insurance Overtime (OT) Policy - OT eligibility and applicable OT rates 1.5 TimesAllowances - attendance allowance, Chemical AllowancesCab / Transportation Facility - based on the timing and pick up from dedicated pointsAccommodation - Near Kandigai / Oragadam ( Company Provided)Food Facility / Meal Allowance - BF, Lunch and Dinner based shift basis and We provided on subsidy for the foodNo of openings: 35 Male candidate only Interview Process: HR Round-Technical Round Immediate Joiner Must Work Location:, Oragadam, Ezhichur Village(Sriperumpudur Taluk,Kanchipuram(DT) - 603 204)If Candidate Interested For Job Please Call Immediately & share your Cvs Call/Whatsapp: Vishakan Placement Service HR Pradeep jobvpservice@gmail.com

Greeting From Vishakan Placement Service Hiring Maintenance Head (Engineer)!!!Role/ Position: Maintenance Head Industry: E-Waste Chemical RecoveryDepartment: Maintenance Experience: 8+ Yrs Qualification: Diploma EEE/Mech & B.E (EEE/Mech)Job Summary & Responsibility:1. Maintenance Strategy & ExecutionDevelop, schedule, and oversee daily, weekly, and shutdown maintenance for chemical, metallurgical, and mechanical assets.Implement Preventive Maintenance (PM) and Predictive Maintenance (PdM) programs (vibration analysis, thermography, oil analysis, thickness testing, corrosion monitoring).Plan and execute turnarounds (major refractory relines, chemical scrubber overhauls, electrical distribution servicing).2. Process Safety & Corrosion ManagementManage maintenance of equipment handling aggressive chemicals (sulfuric, hydrochloric, caustic, or solvent-based circuits) - including lining integrity, gaskets, and material selection.Maintain critical safety devices: pressure relief valves, rupture discs, emergency isolation valves, gas detection, flame monitoring systems.3. Aluminum Alloy Manufacturing SupportMaintain melting/holding furnaces - burner management systems, recuperators, thermocouples, charge well tilting mechanisms.Manage molten metal contact components (launders, troughs, spouts, degassing rotors) - preventive change-outs to avoid refractory failures.Maintain casting equipment: water cooling systems, mold tables, hydraulic shears, billet handling.Ensure hot work and molten metal area safety protocols are integrated into all maintenance permits.4. General Engineering WorkshopManage compressed air systems (dryers/filters), overhead cranes (periodic statutory inspection), forklifts, and general lifting tackle.5. People & Contractor ManagementLead, train, and schedule mechanical, electrical, instrumentation, and welding technicians (direct and indirect).Develop skills matrix - especially for hazardous area work, hot work, confined space entry, and chemical handling.Manage external contractors for specialist work (refractory installation, NDT, high-voltage, thermography).6. Budget & Spares OptimizationPrepare and control maintenance budget (labor, materials, third-party services, consumables).Manage critical spares strategy 7. Reliability & Continuous ImprovementLead root cause analysis (RCA) for unplanned failures - especially chemical leaks, furnace refractory failures, or pump seal failures.Track Overall Equipment Effectiveness (OEE) .Implement reliability improvements (e.g., upgraded seal materials, better refractory design, machine PM optimization).8. HSE & ComplianceIssue and audit safe work permits (hot work, confined space, work at height, electrical isolation, line breaking for chemical lines).Ensure statutory inspections: pressure vessels, cranes, lifting equipment, electrical systems, fire suppression.Lead maintenance contribution to process hazard analyses (HAZOPs) and pre-startup safety reviews (PSSRs).Fixed Salary: 50 K Takehome+ PF+Medical Insurance (As Per interview performance & Experience based )C License Holder & B License Holder Shift Timing: 8 hrs Rotational / 1- Rotational WeekOff Overtime (OT) Policy - OT eligibility and applicable OT rates 1.5 TimesPF & ESI - ApplicableCab / Transportation Facility: Oragadam Pickup pointAccommodation - Near Kandigai / Oragadam ( Company Provided)Food Facility / Meal Allowance - BF, Lunch and Dinner based shift basis and We provided on subsidy for the foodNo of openings: 5 Male Candidate only Interview round: HR Round - MD Round Immediate Joiner Must Work Location:, Oragadam, Ezhichur Village(Sriperumpudur Taluk,Kanchipuram(DT) - 603 204)

As a Junior Process Operator Technician, you will play a key role in supporting the production process in our facility. Your responsibilities will include:- Monitoring Production Equipment: Keep a close eye on machines and equipment during operations to ensure they are running smoothly and efficiently.- Assisting in Process Setup: Help with setting up production lines and equipment, ensuring everything is ready for manufacturing.- Conducting Quality Checks: Perform regular checks on products and processes to maintain quality standards and report any issues promptly.- Documenting Process Data: Record operational data and keep logs of activities, ensuring all information is accurate and up-to-date.- Maintaining Cleanliness and Safety: Ensure that the workspace is clean and follows safety protocols to create a safe working environment.To succeed in this role, you should have a diploma in a relevant field and possess keen attention to detail to catch any deviations in the process. Strong basic technical knowledge is essential, along with the ability to work in a team. Good communication skills will help you report findings and collaborate with other team members effectively. Being proactive and willing to learn is crucial, especially since you may encounter new processes and technologies. This position is ideal for individuals looking to start their career in a dynamic manufacturing environment.

VMC & CNC setter programmer with Aluminum die casting industry experience