Technician Jobs

ONLY INDIAN & PAKISTANI CANDIDATES APPLYDismantle and inspect AC/DC electric motors for repair and rewinding.Remove old or damaged windings from motor stators.Measure and record existing winding data, wire size, turns and connections.Prepare coils and install new copper windings according to specifications.Perform coil insertion, insulation, lacing, soldering and connection work.Carry out varnishing and drying of rewound motors.

URGENT HIRING for Medical Lab Technician in SingaporeJOB DESCRIPTIONA Medical Laboratory Technician (MLT) collects patient samples, operates specialized laboratory equipment, and performs diagnostic tests to help physicians diagnose and treat diseases. [1, 2, 3]PROFILE: ALL HEALTHCARE/MEDICAL INDUSTRYEDUCATION QUALIFICATION: MINIMUM REQUIREMENTS DIPLOMAEXPERIENCE: FRESHERS/ EXPERIENCEBENEFITS: MEALS, ACCOMMODATION, MEDICAL INSURANCE, 30 PAID LEAVES ANNUALLY WITH AIRFARE TICKETSSalary : starting 2200$-upto 4000$Contact: PreetiContact# : 7065381174 available on whats app alsoEmail id: primeadvisors2@gmail.comTERMS OF EMPLOYMENTPermanentFull-time (240 days including holiday).This is an annualized role so hours worked may vary from month to month.The salary will be paid monthly.OT (overtime) as per company requirements.For sending your application, send the below mentioned documentsResume10thMark sheet12thMarksheetDegree/DiplomaId Proof/PassportWE DO NOT CHARGE ANY PROCESSING FEES.For more information,Contact: PreetiContact# : 7065381174 available on whats app alsoEmail id: primeadvisors2@gmail.com

An Aircraft Maintenance Engineer (AME) is responsible for inspecting, maintaining, repairing, troubleshooting, and certifying aircraft to ensure they are safe, airworthy, and compliant with aviation regulations. The role involves carrying out scheduled and unscheduled maintenance on aircraft systems, engines, avionics, electrical components, hydraulic systems, landing gear, and structural components while adhering to the standards established by aviation authorities.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine, preventive, scheduled, and unscheduled aircraft maintenance.Conduct daily, transit, weekly, A-check, B-check, C-check, and heavy maintenance inspections.Inspect aircraft structures, fuselage, wings, landing gear, flight controls, and engines.Diagnose and rectify aircraft defects using approved maintenance procedures.Replace, repair, and overhaul defective aircraft components.Ensure all maintenance tasks are completed according to the Aircraft Maintenance Manual (AMM).Troubleshooting & RepairsIdentify mechanical, hydraulic, electrical, pneumatic, and avionics faults.Use specialized diagnostic tools and testing equipment.Repair aircraft systems while maintaining manufacturer specifications.Coordinate with engineering teams for complex technical issues.Perform functional tests after repairs to verify serviceability.Engine & Component MaintenanceInspect aircraft engines for wear, leaks, corrosion, and damage.Perform engine servicing, oil changes, filter replacement, and component inspections.Maintain propellers, Auxiliary Power Units (APU), and fuel systems.Monitor engine performance and recommend corrective actions.Avionics & Electrical SystemsInspect communication and navigation systems.Maintain radar, autopilot, cockpit instrumentation, and electrical wiring.Test aircraft electronic systems for operational reliability.Ensure compliance with avionics maintenance procedures.Documentation & ComplianceComplete maintenance logs, inspection reports, and defect records.Maintain aircraft technical documentation accurately.Ensure compliance with aviation regulatory authorities.Certify aircraft for return to service after maintenance (where appropriately licensed).Follow company maintenance policies and quality assurance procedures.Safety & Quality AssuranceFollow all aviation safety regulations and standard operating procedures.Maintain clean and organized work areas.Ensure proper use of Personal Protective Equipment (PPE).Report safety hazards and technical discrepancies immediately.Participate in safety audits and quality inspections.Team CoordinationWork closely with pilots, technicians, quality inspectors, and operations staff.Coordinate maintenance schedules with flight operations.Assist junior technicians with technical guidance and training.Participate in emergency aircraft recovery and AOG (Aircraft on Ground) support.Required QualificationsDiploma or Bachelor's Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Mechanical Engineering, or Aerospace Engineering.DGCA-approved AME qualification or equivalent aviation authority certification is preferred.Valid Aircraft Maintenance Engineer License (where applicable).Type rating on specific aircraft is an advantage.Relevant experience in aircraft maintenance is preferred.Required SkillsStrong knowledge of aircraft systems and maintenance procedures.Excellent troubleshooting and fault diagnosis skills.Knowledge of aviation regulations and airworthiness standards.Ability to interpret aircraft maintenance manuals and engineering drawings.Strong analytical and problem-solving abilities.Excellent attention to detail.Good communication and teamwork skills.Ability to work under pressure and meet strict deadlines.Computer proficiency in maintenance management software.Good technical documentation skills.Technical KnowledgeAircraft StructuresGas Turbine EnginesHydraulic SystemsPneumatic SystemsElectrical SystemsAvionics SystemsFlight Control SystemsLanding Gear SystemsFuel SystemsAircraft DocumentationMaintenance PlanningAircraft Safety StandardsPreferred CertificationsDGCA Aircraft Maintenance Engineer LicenseEASA Part-66 License (preferred internationally)ICAO-compliant aviation trainingHuman Factors TrainingSafety Management System (SMS) TrainingFuel Tank Safety TrainingEWIS (Electrical Wiring Interconnection System) TrainingAircraft Type Rating CertificationWorking ConditionsAirport hangars, maintenance bases, and line maintenance stations.Rotational shifts including nights, weekends, and public holidays.Outdoor work in varying weather conditions.Physically demanding work involving standing, climbing, bending, and lifting equipment.Exposure to aircraft noise, fuels, lubricants, and hydraulic fluids while following strict safety procedures.Salary Range (India)Fresher: 3.5 - 6 LPA2-5 Years: 6 - 10 LPA5-10 Years: 10 - 18 LPALicensed/Type-Rated AME: 15 - 30+ LPA (depending on airline, aircraft type, and experience)

As a Cardiology Technician, your primary responsibility will be to support cardiologists in diagnosing and treating heart-related issues. You will work in a clinical setting in Chennai.Key Responsibilities:- Conduct Diagnostic Tests: You will perform various tests like ECGs and echocardiograms to help monitor patients' heart health and identify problems.- Prepare Patients: It will be your duty to explain procedures to patients, ensuring they are comfortable and informed about what to expect during the tests.- Maintain Equipment: You will regularly check and maintain the cardiology equipment to ensure it is functioning properly, which is essential for accurate test results.- Record Data Accurately: You will be responsible for documenting test results and patient information in their medical records, ensuring all data is accurate and up-to-date.- Assist in Procedures: You may assist cardiologists during procedures by preparing instruments and monitoring patients, providing crucial support in the clinical setting.Required Skills and Expectations:You should have a degree in M.Pharma, M.Sc, M.Tech, or MVSC. Basic knowledge of cardiac procedures and equipment is essential. Attention to detail, strong communication skills, and empathy towards patients are highly valued. A willingness to learn and adapt to new technologies and methods in cardiology will be important for your success in this role. You will need to work full time in an office environment, so being punctual and organized is critical.

Only for TAMILNADU Candidates can apply !!JOB TITLE: Medical Instruments Technician - Saudi Arabia COUNTRY: Saudi ArabiaCITY: RiyadhJOB LOCATION: Riyadh, Saudi ArabiaJOB CATEGORY: Medical / Healthcare / BiomedicalVACANCY: Top Urgent RequirementSALARY: Negotiable / Good Salary PackageCURRENCY: SAR (Saudi Riyal)JOB TYPE: Full TimeDUTY HOURS: 10 Hours / DayJOB DESCRIPTION:Top Urgent Requirement for Medical Instruments Technician for a reputed hospital / medical company in Riyadh, Saudi Arabia. Candidate will be responsible for installation, maintenance, calibration, and repair of medical instruments and biomedical equipment. Immediate departure.REQUIREMENTS / ELIGIBILITY:*Diploma / Degree in Biomedical Engineering / Medical Equipment Technology*Minimum 2-3 Years Experience as Medical Instruments Technician*Knowledge of medical devices, calibration and troubleshooting*Immediate joiners preferredEXPERIENCE: 2 - 5 Years (In Medical Equipment Field)BENEFITS:*Good Salary Package*Free Accommodation & Transportation (As per company policy)*Medical Insurance (As per KSA Law)*Immediate DepartureINTERVIEW MODE: Online / CV SelectionOnly for TAMILNADU Candidates can apply !!Contact Person:-Mr. Abdul Jaleel8940404074Address-NO.12 Ground Floor, Sun Complex Ultra Complex Street, Anna Nagar, Madurai, Tamil Nadu, India - 625020

JOB DESCRIPTION - LAB TechnicianPROFILE: ALL HEALTHCARE/MEDICAL INDUSTRYEDUCATION QUALIFICATION: MINIMUM REQUIREMENTS DIPLOMAEXPERIENCE: FRESHERS/ EXPERIENCEBENEFITS: MEALS, ACCOMMODATION, MEDICAL INSURANCE, 30 PAID LEAVES ANNUALLY WITH AIRFARE TICKETSOverview: Sample Management: Collect, receive, label, and store biological samples or chemical substances safely.Testing and Analysis: Run diagnostic tests on blood, tissue, and other materials following precise methods.Equipment Maintenance: Clean, sterilize, calibrate, and troubleshoot lab tools and automated instruments.Data Recording: Log test results accurately into digital databases or medical records and report findingsSalary : starting 2200$-upto 4000$Duty hours: 8hrsContact: SelviTERMS OF EMPLOYMENTPermanentFull-time (240 days including holiday).This is an annualized role so hours worked may vary from month to month.The salary will be paid monthly.OT (overtime) as per company requirements.For sending your application, send the below mentioned documentsResume10th Mark sheet12th Mark sheetDegree/DiplomaId Proof/PassportWE DO NOT CHARGE ANY FEES.For more information,Contact: Selvi

An Aircraft Maintenance Engineer (AME) is responsible for inspecting, maintaining, repairing, troubleshooting, and certifying aircraft to ensure they are safe, airworthy, and compliant with aviation regulations. The role involves carrying out scheduled and unscheduled maintenance on aircraft systems, engines, avionics, electrical components, hydraulic systems, landing gear, and structural components while adhering to the standards established by aviation authorities.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine, preventive, scheduled, and unscheduled aircraft maintenance.Conduct daily, transit, weekly, A-check, B-check, C-check, and heavy maintenance inspections.Inspect aircraft structures, fuselage, wings, landing gear, flight controls, and engines.Diagnose and rectify aircraft defects using approved maintenance procedures.Replace, repair, and overhaul defective aircraft components.Ensure all maintenance tasks are completed according to the Aircraft Maintenance Manual (AMM).Troubleshooting & RepairsIdentify mechanical, hydraulic, electrical, pneumatic, and avionics faults.Use specialized diagnostic tools and testing equipment.Repair aircraft systems while maintaining manufacturer specifications.Coordinate with engineering teams for complex technical issues.Perform functional tests after repairs to verify serviceability.Engine & Component MaintenanceInspect aircraft engines for wear, leaks, corrosion, and damage.Perform engine servicing, oil changes, filter replacement, and component inspections.Maintain propellers, Auxiliary Power Units (APU), and fuel systems.Monitor engine performance and recommend corrective actions.Avionics & Electrical SystemsInspect communication and navigation systems.Maintain radar, autopilot, cockpit instrumentation, and electrical wiring.Test aircraft electronic systems for operational reliability.Ensure compliance with avionics maintenance procedures.Documentation & ComplianceComplete maintenance logs, inspection reports, and defect records.Maintain aircraft technical documentation accurately.Ensure compliance with aviation regulatory authorities.Certify aircraft for return to service after maintenance (where appropriately licensed).Follow company maintenance policies and quality assurance procedures.Safety & Quality AssuranceFollow all aviation safety regulations and standard operating procedures.Maintain clean and organized work areas.Ensure proper use of Personal Protective Equipment (PPE).Report safety hazards and technical discrepancies immediately.Participate in safety audits and quality inspections.Team CoordinationWork closely with pilots, technicians, quality inspectors, and operations staff.Coordinate maintenance schedules with flight operations.Assist junior technicians with technical guidance and training.Participate in emergency aircraft recovery and AOG (Aircraft on Ground) support.Required QualificationsDiploma or Bachelor's Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Mechanical Engineering, or Aerospace Engineering.DGCA-approved AME qualification or equivalent aviation authority certification is preferred.Valid Aircraft Maintenance Engineer License (where applicable).Type rating on specific aircraft is an advantage.Relevant experience in aircraft maintenance is preferred.Required SkillsStrong knowledge of aircraft systems and maintenance procedures.Excellent troubleshooting and fault diagnosis skills.Knowledge of aviation regulations and airworthiness standards.Ability to interpret aircraft maintenance manuals and engineering drawings.Strong analytical and problem-solving abilities.Excellent attention to detail.Good communication and teamwork skills.Ability to work under pressure and meet strict deadlines.Computer proficiency in maintenance management software.Good technical documentation skills.Technical KnowledgeAircraft StructuresGas Turbine EnginesHydraulic SystemsPneumatic SystemsElectrical SystemsAvionics SystemsFlight Control SystemsLanding Gear SystemsFuel SystemsAircraft DocumentationMaintenance PlanningAircraft Safety StandardsPreferred CertificationsDGCA Aircraft Maintenance Engineer LicenseEASA Part-66 License (preferred internationally)ICAO-compliant aviation trainingHuman Factors TrainingSafety Management System (SMS) TrainingFuel Tank Safety TrainingEWIS (Electrical Wiring Interconnection System) TrainingAircraft Type Rating CertificationWorking ConditionsAirport hangars, maintenance bases, and line maintenance stations.Rotational shifts including nights, weekends, and public holidays.Outdoor work in varying weather conditions.Physically demanding work involving standing, climbing, bending, and lifting equipment.Exposure to aircraft noise, fuels, lubricants, and hydraulic fluids while following strict safety procedures.Salary Range (India)Fresher: 3.5 - 6 LPA2-5 Years: 6 - 10 LPA5-10 Years: 10 - 18 LPALicensed/Type-Rated AME: 15 - 30+ LPA (depending on airline, aircraft type, and experience)

An Aircraft Maintenance Engineer (AME) is responsible for inspecting, maintaining, repairing, troubleshooting, and certifying aircraft to ensure they are safe, airworthy, and compliant with aviation regulations. The role involves carrying out scheduled and unscheduled maintenance on aircraft systems, engines, avionics, electrical components, hydraulic systems, landing gear, and structural components while adhering to the standards established by aviation authorities.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine, preventive, scheduled, and unscheduled aircraft maintenance.Conduct daily, transit, weekly, A-check, B-check, C-check, and heavy maintenance inspections.Inspect aircraft structures, fuselage, wings, landing gear, flight controls, and engines.Diagnose and rectify aircraft defects using approved maintenance procedures.Replace, repair, and overhaul defective aircraft components.Ensure all maintenance tasks are completed according to the Aircraft Maintenance Manual (AMM).Troubleshooting & RepairsIdentify mechanical, hydraulic, electrical, pneumatic, and avionics faults.Use specialized diagnostic tools and testing equipment.Repair aircraft systems while maintaining manufacturer specifications.Coordinate with engineering teams for complex technical issues.Perform functional tests after repairs to verify serviceability.Engine & Component MaintenanceInspect aircraft engines for wear, leaks, corrosion, and damage.Perform engine servicing, oil changes, filter replacement, and component inspections.Maintain propellers, Auxiliary Power Units (APU), and fuel systems.Monitor engine performance and recommend corrective actions.Avionics & Electrical SystemsInspect communication and navigation systems.Maintain radar, autopilot, cockpit instrumentation, and electrical wiring.Test aircraft electronic systems for operational reliability.Ensure compliance with avionics maintenance procedures.Documentation & ComplianceComplete maintenance logs, inspection reports, and defect records.Maintain aircraft technical documentation accurately.Ensure compliance with aviation regulatory authorities.Certify aircraft for return to service after maintenance (where appropriately licensed).Follow company maintenance policies and quality assurance procedures.Safety & Quality AssuranceFollow all aviation safety regulations and standard operating procedures.Maintain clean and organized work areas.Ensure proper use of Personal Protective Equipment (PPE).Report safety hazards and technical discrepancies immediately.Participate in safety audits and quality inspections.Team CoordinationWork closely with pilots, technicians, quality inspectors, and operations staff.Coordinate maintenance schedules with flight operations.Assist junior technicians with technical guidance and training.Participate in emergency aircraft recovery and AOG (Aircraft on Ground) support.Required QualificationsDiploma or Bachelor's Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Mechanical Engineering, or Aerospace Engineering.DGCA-approved AME qualification or equivalent aviation authority certification is preferred.Valid Aircraft Maintenance Engineer License (where applicable).Type rating on specific aircraft is an advantage.Relevant experience in aircraft maintenance is preferred.Required SkillsStrong knowledge of aircraft systems and maintenance procedures.Excellent troubleshooting and fault diagnosis skills.Knowledge of aviation regulations and airworthiness standards.Ability to interpret aircraft maintenance manuals and engineering drawings.Strong analytical and problem-solving abilities.Excellent attention to detail.Good communication and teamwork skills.Ability to work under pressure and meet strict deadlines.Computer proficiency in maintenance management software.Good technical documentation skills.Technical KnowledgeAircraft StructuresGas Turbine EnginesHydraulic SystemsPneumatic SystemsElectrical SystemsAvionics SystemsFlight Control SystemsLanding Gear SystemsFuel SystemsAircraft DocumentationMaintenance PlanningAircraft Safety StandardsPreferred CertificationsDGCA Aircraft Maintenance Engineer LicenseEASA Part-66 License (preferred internationally)ICAO-compliant aviation trainingHuman Factors TrainingSafety Management System (SMS) TrainingFuel Tank Safety TrainingEWIS (Electrical Wiring Interconnection System) TrainingAircraft Type Rating CertificationWorking ConditionsAirport hangars, maintenance bases, and line maintenance stations.Rotational shifts including nights, weekends, and public holidays.Outdoor work in varying weather conditions.Physically demanding work involving standing, climbing, bending, and lifting equipment.Exposure to aircraft noise, fuels, lubricants, and hydraulic fluids while following strict safety procedures.Salary Range (India)Fresher: 3.5 - 6 LPA2-5 Years: 6 - 10 LPA5-10 Years: 10 - 18 LPALicensed/Type-Rated AME: 15 - 30+ LPA (depending on airline, aircraft type, and experience)

We are looking for an Aircraft Maintenance Engineer to join our team in Surat. This position requires an individual with a keen eye for detail and a passion for aviation.Key Responsibilities:- Conduct Inspections: Regularly check aircraft systems and components to ensure they meet safety and performance standards.- Perform Maintenance: Execute scheduled maintenance tasks and repairs on aircraft, ensuring all work is compliant with regulations and procedures.- Troubleshoot Issues: Identify and diagnose potential problems in aircraft systems and components, applying effective solutions to ensure operational safety.- Keep Records: Maintain accurate documentation of inspections, maintenance, and repairs performed on each aircraft to comply with regulatory standards.- Collaborate with Teams: Work closely with pilots, ground crew, and other engineers to communicate needs and ensure the aircraft are ready for operation.Required Skills and Expectations:The ideal candidate should have a strong understanding of aircraft systems and maintenance procedures, along with problem-solving abilities. Good communication skills are essential for working with a team in a collaborative environment. A genuine interest in aviation technology and safety practices is crucial. Since this is an entry-level position, we welcome applications from recent graduates or individuals with up to six years of experience. Candidates should have at least completed their 12th grade education. A proactive attitude towards learning and adapting to new challenges in the aviation sector is expected.

As a Paramedical Technician in Chennai, you will play a vital role in supporting medical professionals and ensuring the smooth operation of healthcare services. This position requires dedication and attention to detail, especially in a fast-paced environment.Key Responsibilities:- Patient Preparation: Assist in preparing patients for examinations and treatment by taking vital signs, history, and other necessary information to ensure they are ready for care.- Equipment Maintenance: Ensure that medical instruments and equipment are cleaned, sterilized, and maintained properly to meet safety standards and provide reliable service.- Assisting Healthcare Providers: Work alongside doctors and nurses by providing necessary support during procedures, ensuring all required materials are available and organized.- Record Keeping: Maintain accurate and up-to-date patient records and data to facilitate smooth communication within the healthcare team and ensure compliance with regulations.- Emergency Response: Be prepared to assist in emergency situations, following protocols to ensure patient safety and effective care.Required Skills and Expectations:Candidates should possess a degree in BDS, B.Pharma, B.Sc, B.E, or BVSC. Strong communication and interpersonal skills are essential for interacting with patients and medical staff. A proactive approach to problem-solving and the ability to work in a team are vital. Attention to detail and the ability to handle sensitive information with confidentiality will also be expected. Previous experience is not required, making this position ideal for recent graduates looking to start their careers in healthcare.

Key Responsibilities:Install, inspect, maintain, and troubleshoot biomedical and medical equipment.Perform preventive and corrective maintenance of medical devices.Ensure proper calibration and functioning of equipment.Coordinate with hospital staff and equipment vendors for technical support.Maintain equipment service records, maintenance logs, and documentation.Assist in equipment procurement, evaluation, and installation.Ensure medical equipment complies with safety and quality standards.Provide technical guidance and basic training to healthcare staff.Identify equipment issues and coordinate timely repairs.Follow hospital safety procedures and biomedical equipment protocols.Eligibility / Qualification:B.E./B.Tech in Biomedical Engineering.Freshers and experienced candidates can apply.Good communication and problem-solving skills.Basic knowledge of medical equipment and troubleshooting is preferred.

Key Responsibilities:Conduct vision and eye examinations.Perform visual acuity and refraction tests.Assess patients for common vision problems.Prescribe and dispense spectacles and contact lenses as required.Assist ophthalmologists during eye-care procedures when needed.Maintain accurate patient records and examination reports.Assist with collection, handling, labeling, and processing of biological samples.Support genetic and molecular laboratory procedures.Perform basic laboratory testing and maintain proper documentation.Assist with DNA/RNA extraction and sample preparation where applicable.Maintain laboratory records and test reports.Follow laboratory safety, quality-control, and standard operating procedures.Assist in data entry and interpretation of laboratory/genetic test results under supervision.

As a Cardiac Technician, you will play a crucial role in supporting healthcare professionals in diagnosing and treating heart-related conditions. Your work will involve operating specialized equipment and performing various cardiac tests while ensuring patient safety and comfort.Key Responsibilities:- Conduct Electrocardiograms (ECGs): You will perform ECGs to measure the electrical activity of the heart, helping doctors assess heart health.- Assist in Stress Testing: You will prepare patients for exercise or pharmacological stress tests to evaluate heart function under stress.- Maintain Cardiac Equipment: It will be your responsibility to regularly check and maintain medical devices used in cardiac testing, ensuring they are functioning properly.- Monitor Patient Vital Signs: During procedures, you will observe and record patients' vital signs, alerting healthcare providers to any changes.- Provide Patient Care: You will help patients feel comfortable during tests, explaining procedures and addressing any concerns they may have.Required Skills and Expectations:You should have a diploma in a relevant field and at least 1-7 years of experience as a cardiac technician. Strong attention to detail and the ability to work with medical technology is essential. You should have good communication skills to explain procedures to patients clearly. A strong sense of empathy is important, as you will be interacting with patients in potentially stressful situations. Teamwork is crucial as you will collaborate with doctors and other healthcare professionals to provide the best care.

We are seeking a dedicated Blood Bank Technician to join our team in the United Arab Emirates. This role is ideal for candidates with a diploma and those who are eager to start their careers or gain further experience in the medical field. The Blood Bank Technician will work in our facility, contributing to the critical process of blood donation and transfusion.Key Responsibilities:- Blood Collection: Assist in collecting blood samples from donors while ensuring a comfortable experience and adhering to safety protocols.- Testing and Processing: Conduct tests on blood samples to ensure safety and compatibility. This includes screening for infections and determining blood types.- Storage Management: Properly store and manage blood products in accordance with established guidelines to maintain quality and safety.- Inventory Control: Monitor blood inventory levels and report any shortages to ensure that an adequate supply is available for patient needs.- Record Keeping: Maintain accurate and detailed records of blood collections and testing results, ensuring compliance with regulations and protocol.Required Skills and Expectations:Candidates should possess a diploma in medical technology or a related field. Attention to detail and strong organizational skills are essential for managing records and ensuring safety protocols. Good communication skills are necessary for interacting with donors and team members. Basic knowledge of laboratory equipment and procedures is beneficial. A commitment to adhering to health and safety regulations is essential. Being a team player with a positive attitude will help you thrive in this role.

As an X Ray Technician, you will play a key role in assisting medical professionals by using imaging technology to produce detailed images of patients' internal structures. This position requires a strong attention to detail and a commitment to patient care.Key Responsibilities:- Operate X-ray Equipment: You will be responsible for using radiographic equipment to perform X-ray procedures, ensuring proper positioning and safety measures are followed.- Prepare Patients: You will greet patients, explain the procedure, and ensure their comfort while preparing them for X-ray imaging.- Maintain Imaging Records: You will document patient information and keep accurate records of imaging procedures and results for further analysis by doctors.- Follow Safety Protocols: You must adhere to established safety guidelines to protect both patients and staff from unnecessary radiation exposure during imaging procedures.- Collaborate with Healthcare Staff: You will work closely with radiologists and other healthcare professionals to discuss imaging techniques and provide support as needed.Required Skills and Expectations:Candidates should have a minimum of 2 years of relevant experience in X-ray technology. A valid certification in radiologic technology is essential. Strong technical skills to operate imaging equipment effectively are required, along with excellent communication skills to interact with patients and team members. Attention to detail is critical for capturing high-quality images and ensuring patient safety. Flexibility to work in a fast-paced environment and a compassionate approach to patient care are expected as well.

ONLY INDIAN & PAKISTANI CANDIDATES APPLYAssist with lifting, moving, and positioning heavy materials and equipment.Select and inspect slings, shackles, hooks, chains, and other lifting accessories before use.Properly secure and balance loads for safe lifting operations.Attach and detach loads from cranes and other lifting equipment.Communicate with crane operators using standard hand signals or radio communication.Guide suspended loads safely to the required location.Follow lifting plans and instructions from supervisors.

ONLY INDIAN & PAKISTANI CANDIDATES APPLYDiagnose and repair vehicle electrical and electronic systems.Install, maintain, and repair wiring, batteries, alternators, starters, and lighting systems.Troubleshoot electrical faults using diagnostic tools and equipment.Repair and maintain vehicle electrical components and accessories.Check and repair air-conditioning electrical systems.Perform preventive electrical maintenance on vehicles.

ONLY INDIAN & PAKISTANI CANDIDATES APPLYInstall, maintain and repair split, window, ducted and central AC systems.Diagnose electrical, mechanical and refrigeration faults.Perform regular preventive and corrective maintenance.Check compressors, condensers, evaporators, motors, fans and thermostats.Carry out refrigerant charging, recovery and leak detection.Clean filters, coils, blowers, drain lines and other AC components.Check electrical wiring, capacitors, contactors and control systems.Troubleshoot poor cooling, unusual noise, water leakage and system breakdowns.Replace faulty AC components and test the system after repair.Work on package units, chillers, AHUs and FCUs where required.

URGENT RECRUITMENT FOR MALDIVES Position: AC TECHNICIAN CUM ELECTRICIAN - 01 No Salary: USD 500/- + OT(Salary will be in MVR or USD)Job Details: Contract Period : 2 Years Work Site : Male City Duty Hours : 10 HoursBenefits Provided: Food Allowances : By Company Accommodation : By CompanyCandidate Requirements: Age : 22 - 35 Years Experience : Required (AC & Electrical) Able to do Multi-Task Good Communication Skills Medically Fit Candidates OnlyInterested candidates can share their CV / Documents.Contact:STAR TRAVELS AND CONSULTANCY

We are seeking an Executive Mechanical Maintenance professional to ensure that all mechanical systems operate efficiently and reliably. The ideal candidate will have 1 to 7 years of relevant experience and a diploma in a related field.Key Responsibilities:- Perform Maintenance Inspections: Regularly inspect and assess mechanical systems to identify any faults or required repairs, ensuring optimal performance and safety.- Conduct Repairs: Execute timely and effective repairs on mechanical equipment, minimizing downtime and improving overall efficiency of operations.- Document Maintenance Activities: Maintain accurate records of inspections, repairs, and maintenance activities to track performance and compliance with quality standards.- Support Installation Projects: Assist in the installation of new machinery and equipment, ensuring proper setup and integration into existing systems.- Collaborate with Team Members: Work closely with other maintenance staff and departments to facilitate a smooth workflow and address any mechanical issues as they arise.Required Skills and Expectations:Candidates should possess a strong understanding of mechanical systems and maintenance practices. Excellent troubleshooting and problem-solving skills are essential. Effective communication and teamwork abilities are crucial, as the role involves working with various departments. A proactive attitude toward safety and compliance with industry standards is expected. Flexibility to adapt to changing circumstances and readiness to improve skills through ongoing learning are also important for success in this position.

URGENT HIRING for Anesthesia Technician in SingaporeJOB DESCRIPTIONAn anesthesia technician is a healthcare professional who prepares, tests, and maintains specialized equipment used to deliver anesthesia and assists the surgical team during medical procedures. They are not doctors or nurses, but they provide vital support in the operating room. PROFILE: ALL HEALTHCARE/MEDICAL INDUSTRYEDUCATION QUALIFICATION: MINIMUM REQUIREMENTS DIPLOMAEXPERIENCE: FRESHERS/ EXPERIENCEBENEFITS: MEALS, ACCOMMODATION, MEDICAL INSURANCE, 30 PAID LEAVES ANNUALLY WITH AIRFARE TICKETSSalary : starting 2200$-upto 4000$Contact: PreetiContact# : 7065381174 available on whats app alsoEmail id: primeadvisors2@gmail.comTERMS OF EMPLOYMENTPermanentFull-time (240 days including holiday).This is an annualized role so hours worked may vary from month to month.The salary will be paid monthly.OT (overtime) as per company requirements.For sending your application, send the below mentioned documentsResume10thMark sheet12thMarksheetDegree/DiplomaId Proof/PassportWE DO NOT CHARGE ANY PROCESSING FEES.For more information,Contact: PreetiContact# : 7065381174 available on whats app alsoEmail id: primeadvisors2@gmail.com