Technician Fresher Jobs in Telangana

An Aircraft Maintenance Engineer (AME) is responsible for inspecting, maintaining, repairing, troubleshooting, and certifying aircraft to ensure they are safe, airworthy, and compliant with aviation regulations. The role involves carrying out scheduled and unscheduled maintenance on aircraft systems, engines, avionics, electrical components, hydraulic systems, landing gear, and structural components while adhering to the standards established by aviation authorities.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine, preventive, scheduled, and unscheduled aircraft maintenance.Conduct daily, transit, weekly, A-check, B-check, C-check, and heavy maintenance inspections.Inspect aircraft structures, fuselage, wings, landing gear, flight controls, and engines.Diagnose and rectify aircraft defects using approved maintenance procedures.Replace, repair, and overhaul defective aircraft components.Ensure all maintenance tasks are completed according to the Aircraft Maintenance Manual (AMM).Troubleshooting & RepairsIdentify mechanical, hydraulic, electrical, pneumatic, and avionics faults.Use specialized diagnostic tools and testing equipment.Repair aircraft systems while maintaining manufacturer specifications.Coordinate with engineering teams for complex technical issues.Perform functional tests after repairs to verify serviceability.Engine & Component MaintenanceInspect aircraft engines for wear, leaks, corrosion, and damage.Perform engine servicing, oil changes, filter replacement, and component inspections.Maintain propellers, Auxiliary Power Units (APU), and fuel systems.Monitor engine performance and recommend corrective actions.Avionics & Electrical SystemsInspect communication and navigation systems.Maintain radar, autopilot, cockpit instrumentation, and electrical wiring.Test aircraft electronic systems for operational reliability.Ensure compliance with avionics maintenance procedures.Documentation & ComplianceComplete maintenance logs, inspection reports, and defect records.Maintain aircraft technical documentation accurately.Ensure compliance with aviation regulatory authorities.Certify aircraft for return to service after maintenance (where appropriately licensed).Follow company maintenance policies and quality assurance procedures.Safety & Quality AssuranceFollow all aviation safety regulations and standard operating procedures.Maintain clean and organized work areas.Ensure proper use of Personal Protective Equipment (PPE).Report safety hazards and technical discrepancies immediately.Participate in safety audits and quality inspections.Team CoordinationWork closely with pilots, technicians, quality inspectors, and operations staff.Coordinate maintenance schedules with flight operations.Assist junior technicians with technical guidance and training.Participate in emergency aircraft recovery and AOG (Aircraft on Ground) support.Required QualificationsDiploma or Bachelor's Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Mechanical Engineering, or Aerospace Engineering.DGCA-approved AME qualification or equivalent aviation authority certification is preferred.Valid Aircraft Maintenance Engineer License (where applicable).Type rating on specific aircraft is an advantage.Relevant experience in aircraft maintenance is preferred.Required SkillsStrong knowledge of aircraft systems and maintenance procedures.Excellent troubleshooting and fault diagnosis skills.Knowledge of aviation regulations and airworthiness standards.Ability to interpret aircraft maintenance manuals and engineering drawings.Strong analytical and problem-solving abilities.Excellent attention to detail.Good communication and teamwork skills.Ability to work under pressure and meet strict deadlines.Computer proficiency in maintenance management software.Good technical documentation skills.Technical KnowledgeAircraft StructuresGas Turbine EnginesHydraulic SystemsPneumatic SystemsElectrical SystemsAvionics SystemsFlight Control SystemsLanding Gear SystemsFuel SystemsAircraft DocumentationMaintenance PlanningAircraft Safety StandardsPreferred CertificationsDGCA Aircraft Maintenance Engineer LicenseEASA Part-66 License (preferred internationally)ICAO-compliant aviation trainingHuman Factors TrainingSafety Management System (SMS) TrainingFuel Tank Safety TrainingEWIS (Electrical Wiring Interconnection System) TrainingAircraft Type Rating CertificationWorking ConditionsAirport hangars, maintenance bases, and line maintenance stations.Rotational shifts including nights, weekends, and public holidays.Outdoor work in varying weather conditions.Physically demanding work involving standing, climbing, bending, and lifting equipment.Exposure to aircraft noise, fuels, lubricants, and hydraulic fluids while following strict safety procedures.Salary Range (India)Fresher: 3.5 - 6 LPA2-5 Years: 6 - 10 LPA5-10 Years: 10 - 18 LPALicensed/Type-Rated AME: 15 - 30+ LPA (depending on airline, aircraft type, and experience)

An Aircraft Maintenance Engineer (AME) is responsible for inspecting, maintaining, repairing, troubleshooting, and certifying aircraft to ensure they are safe, airworthy, and compliant with aviation regulations. The role involves carrying out scheduled and unscheduled maintenance on aircraft systems, engines, avionics, electrical components, hydraulic systems, landing gear, and structural components while adhering to the standards established by aviation authorities.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine, preventive, scheduled, and unscheduled aircraft maintenance.Conduct daily, transit, weekly, A-check, B-check, C-check, and heavy maintenance inspections.Inspect aircraft structures, fuselage, wings, landing gear, flight controls, and engines.Diagnose and rectify aircraft defects using approved maintenance procedures.Replace, repair, and overhaul defective aircraft components.Ensure all maintenance tasks are completed according to the Aircraft Maintenance Manual (AMM).Troubleshooting & RepairsIdentify mechanical, hydraulic, electrical, pneumatic, and avionics faults.Use specialized diagnostic tools and testing equipment.Repair aircraft systems while maintaining manufacturer specifications.Coordinate with engineering teams for complex technical issues.Perform functional tests after repairs to verify serviceability.Engine & Component MaintenanceInspect aircraft engines for wear, leaks, corrosion, and damage.Perform engine servicing, oil changes, filter replacement, and component inspections.Maintain propellers, Auxiliary Power Units (APU), and fuel systems.Monitor engine performance and recommend corrective actions.Avionics & Electrical SystemsInspect communication and navigation systems.Maintain radar, autopilot, cockpit instrumentation, and electrical wiring.Test aircraft electronic systems for operational reliability.Ensure compliance with avionics maintenance procedures.Documentation & ComplianceComplete maintenance logs, inspection reports, and defect records.Maintain aircraft technical documentation accurately.Ensure compliance with aviation regulatory authorities.Certify aircraft for return to service after maintenance (where appropriately licensed).Follow company maintenance policies and quality assurance procedures.Safety & Quality AssuranceFollow all aviation safety regulations and standard operating procedures.Maintain clean and organized work areas.Ensure proper use of Personal Protective Equipment (PPE).Report safety hazards and technical discrepancies immediately.Participate in safety audits and quality inspections.Team CoordinationWork closely with pilots, technicians, quality inspectors, and operations staff.Coordinate maintenance schedules with flight operations.Assist junior technicians with technical guidance and training.Participate in emergency aircraft recovery and AOG (Aircraft on Ground) support.Required QualificationsDiploma or Bachelor's Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Mechanical Engineering, or Aerospace Engineering.DGCA-approved AME qualification or equivalent aviation authority certification is preferred.Valid Aircraft Maintenance Engineer License (where applicable).Type rating on specific aircraft is an advantage.Relevant experience in aircraft maintenance is preferred.Required SkillsStrong knowledge of aircraft systems and maintenance procedures.Excellent troubleshooting and fault diagnosis skills.Knowledge of aviation regulations and airworthiness standards.Ability to interpret aircraft maintenance manuals and engineering drawings.Strong analytical and problem-solving abilities.Excellent attention to detail.Good communication and teamwork skills.Ability to work under pressure and meet strict deadlines.Computer proficiency in maintenance management software.Good technical documentation skills.Technical KnowledgeAircraft StructuresGas Turbine EnginesHydraulic SystemsPneumatic SystemsElectrical SystemsAvionics SystemsFlight Control SystemsLanding Gear SystemsFuel SystemsAircraft DocumentationMaintenance PlanningAircraft Safety StandardsPreferred CertificationsDGCA Aircraft Maintenance Engineer LicenseEASA Part-66 License (preferred internationally)ICAO-compliant aviation trainingHuman Factors TrainingSafety Management System (SMS) TrainingFuel Tank Safety TrainingEWIS (Electrical Wiring Interconnection System) TrainingAircraft Type Rating CertificationWorking ConditionsAirport hangars, maintenance bases, and line maintenance stations.Rotational shifts including nights, weekends, and public holidays.Outdoor work in varying weather conditions.Physically demanding work involving standing, climbing, bending, and lifting equipment.Exposure to aircraft noise, fuels, lubricants, and hydraulic fluids while following strict safety procedures.Salary Range (India)Fresher: 3.5 - 6 LPA2-5 Years: 6 - 10 LPA5-10 Years: 10 - 18 LPALicensed/Type-Rated AME: 15 - 30+ LPA (depending on airline, aircraft type, and experience)

ITI Technician - Hyderabad Location: Hyderabad Salary: Negotiable Job Type: Full-Time Freshers & Experienced Candidates Can ApplyEligibility ITI (All Trades)Job DescriptionWe are looking for dedicated and technically skilled Technicians to join our manufacturing team. The ideal candidate will be responsible for operating, maintaining, and troubleshooting equipment while ensuring smooth production operations. Freshers and experienced candidates are welcome to apply.Key Responsibilities Operate and monitor production machinery and equipment Perform routine maintenance and basic repairs Troubleshoot equipment and process-related issues Follow safety guidelines and company procedures Assist in production and manufacturing activities Conduct equipment inspections and report abnormalities Maintain records of maintenance and production activities Ensure workplace cleanliness and organization Support quality standards and compliance requirements Work effectively with team members to achieve production targetsDesired Skills Machine Operation Preventive Maintenance Troubleshooting Skills Equipment Handling Technical Knowledge Safety Awareness Quality Inspection Problem Solving Skills Teamwork and Communication Time Management

We are seeking an Electrical Technician to join our team in Hyderabad. This role is suitable for candidates with up to 3 years of experience and an I.T.I. certification. The position is full-time and based at our office.Key Responsibilities:- Installation of Electrical Systems: You will be responsible for installing electrical systems and equipment, ensuring that everything functions properly.- Troubleshooting and Repair: You will diagnose electrical issues, make repairs, and replace faulty components to keep systems running smoothly.- Maintenance Tasks: Regular maintenance on electrical systems is essential, including inspecting and testing equipment to prevent breakdowns.- Reading Technical Drawings: You must be able to read and interpret technical diagrams and blueprints to understand wiring layouts and electrical systems.- Safety Compliance: Adhering to safety standards is crucial. You will ensure that all electrical work follows local regulations and safety practices.Required Skills and Expectations:Candidates must have a solid understanding of electrical systems and components. You should be able to work independently and in teams. Strong problem-solving skills are essential for troubleshooting electrical issues effectively. Good communication skills will help you explain technical information to colleagues or clients clearly. A proactive approach and attention to detail are important traits for this role. Since the position is office-based, punctuality and a disciplined work ethic are valued.

SSZ INFOTECH30 years old organization provides trainingOnline training available at all locationsONLINE/OFFLINE training available all over India and AbroadWe assure a quality trainingAlready Trained Coders CPC or Basic coders NEED NOTQualification:Graduates below 34 years are only eligibleBasic training for Freshers.CPC Training for Freshers /Confirmed JOBS for CPC CERTIFIED CODERSOne may have to relocate for Job if neededScience graduates below 34 years are only eligibleCertified Coders start their career with a pay scale of Rs. 28,000/- to 30,000 per month.With little Experience, one can earn Rs.35,000/- per month with other perquisites.Our Toppers in the CPC Conducted By AAPC USADr. Hemalatha 89% Sravanthy 84% Dr. Vineetha 84% Vinay Bellary 88%Dr. Ujjwala 88% Rameshwari 78% Dr. Sindhuja 84% Priyanka 89%Dr. Sravani 86% Ajitha Reddy 91% Miss Divya 89% Annapoorna 78%.Mounika 76% Sayeed Nazeem 81% Harika 85% Vinay 82% Nazeem 79%Akshya 74% Josi Kiran 76% Niharika 82% Avinash 72% Mamatha 88% Rishitha 72%Reshambi 72% Sonia 78% Santosh 76%Eligibility::Graduates below 32 years are only eligibleAny Graduate / Post GraduateB.Sc - Bio-Chemistry, Biology, Botany, Home science, Microbiology, Nursing, Zoology,M.Sc - Bio-Chemistry, Biology, Botany, Home science, Microbiology, Nursing, Zoology,B Tech Bio-Chemistry/ Bio-Technology, Biomedical,BDS - BPT - BHMS - BAMSMBBS -M.Pharma, B PharmaCAREER GROWTH:Excellent opportunity to enhance your career by getting CPC(Certified Association of Professional Coders) and AHIMA(American Health Information Management Professional Coders)Contact / walk-in-to our office.Senior EXECUTIVESSZ INFOTECH53, MADHUKUNJOpposite to METRO Parade Ground stationNear YMCA,, Next to UCO Bank Secunderabad

We are seeking a Mechanical Engineer to join our team in Hyderabad. This full-time position is perfect for recent graduates who are eager to begin their careers in engineering. The role is specifically open to female candidates.Key Responsibilities:1. Design and Development: Assist in the design and development of mechanical systems and components. You will use engineering software to create prototypes and make improvements to existing designs.2. Analysis and Testing: Conduct tests on prototypes and existing products. You will analyze results to ensure that designs meet performance and safety standards.3. Documentation: Prepare and maintain technical documentation. This includes creating reports and specifications to ensure clear communication of design details and project status.4. Collaboration: Work closely with other engineers and team members. You will collaborate to integrate mechanical systems with electrical and software components, ensuring a cohesive final product.

Position: Paramedical TechnicianResponsibilities:1. Perform various medical tests and procedures as per the instructions from healthcare professionals2. Assist in collecting samples, conducting diagnostic tests, and analyzing results3. Monitor patients' vital signs and report any abnormalities to the medical team4. Maintain accurate records of patient information and medical history5. Ensure cleanliness and maintenance of medical equipment and instruments6. Provide support and assistance to patients during medical procedures

Required Paramedical Technician.

Life Science Graduates Wanted in Srikalahasti, Tirumala, Tirupati, Vishnu Nagar, Parvathipuram, Krishna, Ganeshguri, Karpaga Vinayagar Nagar, Krishnagiri, TirumalagiriMedical Coding is the fastest-growing profession in the healthcare industry today. IT is a niche specialization and the demand for trained and certified medical coders is increasing exponentially and bound to increase in upcoming years, especially in India.You have at least a Diploma/Degree in any field.This role is open to fresh graduates with excellent English communication skills.You pay strong attention to details and are capable of delivering top-quality workYou are goal-oriented and thrive in fast-paced environmentsMaintains a working knowledge of CPT-4, ICD-10-CM, and ICD-10-PCS coding principles, governmental regulations, UHDDS (Uniform Hospital Discharge Data Set) guidelines, AHA coding clinic updates, and third-party requirements regarding coding and documentation guidelinesCt Us:HR BHAVANI7358126888

* Candidates should have Good Communication & Analytical Skills and should be Good at Medical Terminology (Physiology & Anatomy).* Should be a good team player with good attitude.* Should be flexible to work in rotational shifts whenever required*Ready to Join with us immediately.The coder reads the documentation to understand the patient's diagnoses assigned - Transforming of healthcare diagnosis, procedures, medical services, and equipment into universal medical alphanumeric codes - Creating uniform vocabulary for describing the causes of injury, illness & death is the role of medical coders - Medical coding allows for Uniform documentation between medical facilities - The main task of a medical coders is to review clinical statements and assign standard Codes Requirements of the role include: - 0 -1 Year of experience in any Healthcare BPO - University degree or equivalent that required 3+ years of formal studies in Life science/BPT/Pharm/Nursing - Good knowledge in human Anatomy/Physiology - 1+ year(s) of experience using a computer with Windows PC applications that required you to use a keyboard, navigate screens, and learn new software tools - Ability to work scheduled shifts from Monday-Friday 7:30 AM to 5:30 PM IST and the shift timings can be changed as per client requirements.CT:HR BHAVANI

Hiring for 38 Jobs in Aircraft Maintenance at Aviation Industry Jobs in Kurnool, Visakhapatnam, Itanagar, Patna, Vadodara, Belagavi, Kochi/Cochin, Mumbai, Bhubaneswar, Jaipur, for Freshers,Required Educational Qualification is : Secondary School, I.T.I., B.Arch, B.C.A, B.E, B.Tech, Other Bachelor Degree, Post Graduate Diploma, M.Tech, Any Master Degree with Good knowledge in Aircraft Maintenance, Aircraft Servicing, Aircraft Engineer, Aircraft Mechanic, Aircraft Technician, Aircraft Supervisor, Aircraft Maintenance Engineer, Aircraft Maintenance Technician, Electrical Engineer, Mechanical Engineer, Civil Engineer, Aeronautical Engineer etc.

SSZ INFOTECH30 Years Old Organization ProvidesOnline Medical Coding Training at all locations inanywhere in India and abroadClass room training availableAlready Trained Coders CPC or Basic coders NEED NOT applyConfirmed JOBS for CPC CERTIFIED CODERS trained at SSZ INFOTECHOne may have to relocate for Job if neededScience graduates below 34 years are onlyBasics / CPC Training Cum JOB forBSc /Nurses/GNM / staff Nurse/nursing Freshers/para Medicals/technicians/DentistBasic Classroom Training for Freshers.CPC Training for Non Certified Experienced / Working Coders.Confirmed Job for CPC Certified CodersPreferred age 34 and below for freshersCandidates may haves to relocate for jobs depending on vacancies.Certified Coders Start Their Career with a Pay Scale of Rs. 28,000/- to 30,000 per Month. with Little Experience, One Can Earn Rs.35,000/- per Month with other Perquisites and Benefits. Certified Medical Coders with 2 to 4 Years Experience Earnsrs.50, 000/- P.m + Perquisites.CPC Certified Coders have Lucrative Jobs Offers in US, UK, UAE etc.Qualification: Preferred upper age limit 34Any Graduate / Post GraduateNurse/GNM/Staff Nurse/Nursing FreshersBSc - Bio-chemistry, Biology, Botany, Home Science, Microbiology, Nursing, Zoology,MSc - Bio-chemistry, Biology, Botany, Home Science, Microbiology, Nursing, Zoology,B Tech Bio-chemistry/ Bio-technology, Biomedical,BDS - BPT - BHMS - BAMS & Pharm DM. Pharma B Pharma - B.com M.comOur Toppers in the CPC Conducted By AAPC USADr. Hemalatha 89% Sravanthy 84% Dr. Vineetha 84% Vinay Bellary 88%Dr. Ujjwala 88% Rameshwari 78% Dr. Sindhuja 84% Priyanka 89%Dr. Sravani 86% Ajitha Reddy 91% Miss Divya 89% Annapoorna 78%.Mounika 76% Sayeed Nazeem 81% Harika 85% Vinay 82% Nazeem 79%Akshya 74% Josi Kiran 76% Niharika 82% Avinash 72% Mamatha 88% Rishitha 72%Reshambi 72% Sonia 78% Santosh 76%Contact / walk-in-to our office.SENIOR EXECUTIVESSZ INFOTECH53, MADHUKUNJOpposite to METRO Parade Ground stationNear YMCA,, Next to UCO Bank.S P ROAD, SECUNDERABAD

SSZ INFOTECH30 years old organization provides trainingOnline training available at all locationsWe assure a quality trainingOur Trainees Include Medical Professionals Doctors, Nurses, MTs, BHMS, Dentist, Post Graduate and Life Science Graduates.We are Proud to Say that all Trained with Us Till March 2026 are in job..Online training available at all locations.ONLINE/OFFLINE training available all over India and AbroadQualification:Graduates below 34 years are only eligibleBasic training for Freshers.CPC Training for Freshers /Confirmed JOBS for CPC CERTIFIED CODERSOne may have to relocate for Job if neededScience graduates below 34 years are only eligibleCertified Coders start their career with a pay scale of Rs. 28,000/- to 30,000 per month.With little Experience, one can earn Rs.35,000/- per month with other perquisites.Our Toppers in the CPC Conducted By AAPC USADr. Hemalatha 89% Sravanthy 84% Dr. Vineetha 84% Vinay Bellary 88%Dr. Ujjwala 88% Rameshwari 78% Dr. Sindhuja 84% Priyanka 89%Dr. Sravani 86% Ajitha Reddy 91% Miss Divya 89% Annapoorna 78%.Mounika 76% Sayeed Nazeem 81% Harika 85% Vinay 82% Nazeem 79%Akshya 74% Josi Kiran 76% Niharika 82% Avinash 72% Mamatha 88% Rishitha 72%Reshambi 72% Sonia 78% Santosh 76%Eligibility::Graduates below 32 years are only eligibleAny Graduate / Post GraduateB.Sc - Bio-Chemistry, Biology, Botany, Home science, Microbiology, Nursing, Zoology,M.Sc - Bio-Chemistry, Biology, Botany, Home science, Microbiology, Nursing, Zoology,B Tech Bio-Chemistry/ Bio-Technology, Biomedical,BDS - BPT - BHMS - BAMSMBBS -M.Pharma, B PharmaCAREER GROWTH:Excellent opportunity to enhance your career by getting CPC(Certified Association of Professional Coders) and AHIMA(American Health Information Management Professional Coders)Contact / walk-in-to our office.Senior EXECUTIVESSZ INFOTECH53, MADHUKUNJOpposite to METRO Parade Ground stationNear YMCA,, Next to UCO Bank Secunderabad

SSZ INFOTECH30 years old organization provides trainingOnline training available at all locationsWe assure a quality trainingOnline training available at all locations.ONLINE/OFFLINE training available all over India and AbroadQualification:Graduates below 34 years are only eligibleBasic training for Freshers.CPC Training for Freshers /Confirmed JOBS for CPC CERTIFIED CODERSOne may have to relocate for Job if neededScience graduates below 34 years are only eligibleCertified Coders start their career with a pay scale of Rs. 28,000/- to 30,000 per month.With little Experience, one can earn Rs.35,000/- per month with other perquisites.Our Toppers in the CPC Conducted By AAPC USADr. Hemalatha 89% Sravanthy 84% Dr. Vineetha 84% Vinay Bellary 88%Dr. Ujjwala 88% Rameshwari 78% Dr. Sindhuja 84% Priyanka 89%Dr. Sravani 86% Ajitha Reddy 91% Miss Divya 89% Annapoorna 78%.Mounika 76% Sayeed Nazeem 81% Harika 85% Vinay 82% Nazeem 79%Akshya 74% Josi Kiran 76% Niharika 82% Avinash 72% Mamatha 88% Rishitha 72%Reshambi 72% Sonia 78% Santosh 76%Eligibility::Graduates below 32 years are only eligibleAny Graduate / Post GraduateB.Sc - Bio-Chemistry, Biology, Botany, Home science, Microbiology, Nursing, Zoology,M.Sc - Bio-Chemistry, Biology, Botany, Home science, Microbiology, Nursing, Zoology,B Tech Bio-Chemistry/ Bio-Technology, Biomedical,BDS - BPT - BHMS - BAMSMBBS -M.Pharma, B PharmaCAREER GROWTH:Excellent opportunity to enhance your career by getting CPC(Certified Association of Professional Coders) and AHIMA(American Health Information Management Professional Coders)Contact / walk-in-to our office.Senior EXECUTIVESSZ INFOTECH53, MADHUKUNJOpposite to METRO Parade Ground stationNear YMCA,, Next to UCO Bank Secunderabad