Maintenance Planning Engineer Jobs

We are looking for a dedicated Production Operator to join our team in Pune, India. This entry-level position is perfect for individuals with 0 to 3 years of experience who are eager to learn and grow in a manufacturing environment.Key Responsibilities:1. **Machine Operation**: You will operate various production machines according to established procedures, ensuring they run smoothly and efficiently.2. **Quality Control**: It is your responsibility to monitor product quality throughout the manufacturing process, making sure that everything meets our standards and specifications.3. **Equipment Maintenance**: You will perform routine maintenance on machines and equipment, keeping them clean and in good working condition to prevent breakdowns.4. **Production Reporting**: You will keep accurate records of production numbers, including any issues that arise during the process, and report these to your supervisor.5. **Safety Compliance**: Following all safety regulations and guidelines is crucial. You will ensure that your work area is safe and that you are using equipment correctly to avoid accidents.Required Skills and Expectations:Candidates should have completed an Industrial Training Institute (I.T.I.) course. You must be able to work effectively as part of a team and communicate clearly with colleagues and supervisors. Basic problem-solving skills and attention to detail are important, as well as a strong willingness to learn and adapt. Reliability and punctuality are crucial for maintaining production schedules.

** Major Responsibilities **Planned and executed preventive and corrective maintenance activities for mechanical equipment.Diagnosed mechanical faults and performed troubleshooting to minimize downtime.Inspected, repaired, and maintained industrial machinery and plant equipment.Monitored equipment performance and implemented reliability improvement measures.Conducted root cause analysis (RCA) of equipment failures and breakdowns.Managed maintenance schedules, work orders, and technical documentation.Supervised installation, commissioning, and testing of mechanical systems.Maintained hydraulic, pneumatic, pumps, compressors, and rotating equipment.Ensured compliance with safety, environmental, and quality standards.Coordinated with production and engineering teams to ensure smooth operations.Managed spare parts inventory and maintenance resources effectively.Supported continuous improvement initiatives to enhance equipment efficiency and productivity.

We are looking for a motivated and talented female Mechanical Engineer to join our team in Chennai. This role is ideal for fresh graduates eager to apply their knowledge and skills in a dynamic work-from-home environment.Key Responsibilities: - Design and Analysis: Create and analyze mechanical components and systems using CAD software to ensure they meet industry standards and project specifications. - Project Support: Assist in various projects by providing technical support and collaborating with other team members to solve engineering challenges. - Documentation: Prepare detailed documentation of designs and processes, ensuring clear communication of project requirements and updates. - Research and Development: Engage in research to support innovative engineering solutions and stay updated with the latest technologies in the field.Required Skills and Expectations: Candidates should have a degree in mechanical engineering or a related field. Strong proficiency in CAD software is essential, along with a good understanding of engineering principles and materials. We expect excellent communication skills, a proactive mindset, and the ability to work independently while managing time effectively. Attention to detail and a passion for problem-solving will contribute to success in this role. As a fresh graduate, eagerness to learn and adapt in a fast-paced environment is highly valued.

Hiring for 1 Project Manager Job in Koraput, with minimum 5 Years Experience,Required Educational Qualification is : M.Tech with Good knowledge in Civil Construction, Estimation etc.

Job Summary:The Civil Engineer Aviation Projects is responsible for planning, designing, and supervising the construction and maintenance of airport infrastructure such as runways, taxiways, aprons, terminal buildings, and support facilities. This role ensures that all civil engineering works comply with national and international aviation standards, environmental regulations, and safety requirements. The engineer works closely with multidisciplinary teams to deliver high-quality, cost-effective, and sustainable airport infrastructure projects.Key Responsibilities: 1. Airport Design & PlanningParticipate in the design, layout, and development of airside (runways, taxiways, aprons) and landside (roads, terminals, parking) infrastructure.Prepare engineering drawings, design reports, and technical specifications.Conduct feasibility studies and assist in the preparation of airport master plans.Ensure design compliance with ICAO Annex 14, FAA, and DGCA standards. 2. Construction Supervision & Site ManagementOversee the execution of civil works at airport construction sites.Supervise contractors, monitor progress, and ensure adherence to quality, safety, and schedule targets.Conduct inspections and verify materials, workmanship, and testing procedures.Manage and resolve site-level issues, variations, and technical queries.Maintain as-built documentation and project progress reports. 3. Pavement Design & MaintenanceDesign flexible and rigid pavements for runways and taxiways using FAARFIELD, COMFAA, or equivalent tools.Analyze aircraft load data and subgrade conditions for pavement design optimization.Develop pavement maintenance and rehabilitation plans based on performance evaluations. 4. Drainage, Utilities & Environmental ComplianceDesign stormwater drainage systems, culverts, and airfield grading layouts.Coordinate with MEP teams for utility planning (water, power, sewer, communication).Ensure compliance with environmental and sustainability regulations (EIA, noise, and waste management). 5. Coordination & DocumentationCollaborate with architects, structural, electrical, and mechanical engineers to ensure design integration.Prepare project documentation, including BOQs, cost estimates, and tender specifications.Liaise with clients, consultants, and aviation authorities for approvals and inspections.Support project management teams with reports, presentations, and technical data.Qualifications and Requirements:Bachelors degree in Civil Engineering (Masters in Transportation, Structural, or Airport Engineering preferred).06 years of relevant experience in aviation or infrastructure development projects.Proficiency in engineering software such as:AutoCAD Civil 3D, Revit, STAAD.Pro, MS Project, Primavera, FAARFIELD, PCASE, or COMFAA.Sound knowledge of ICAO, FAA, DGCA, BIS, and IRC codes and standards.Strong analytical, problem-solving, and project management skills.Excellent communication and coordination abilities.Ability to work under pressure and within high-security airport environments.Key Skills:Airport design and planningPavement and drainage designProject execution and site supervisionQuantity estimation and cost controlAutoCAD Civil 3D and engineering software proficiencyTeam leadership and coordinationSafety and regulatory complianceReport writing and documentationBehavioral Attributes:Detail-oriented and safety-consciousStrong leadership and teamwork abilitiesProfessional ethics and integrityAdaptability to dynamic project environmentsTime management and accountabilityPerformance Indicators:Timely delivery of project milestonesCompliance with design standards and safety normsQuality of engineering documentation and reportingCost efficiency and adherence to project budgetsClient and stakeholder satisfaction

Position: Head Electrical MaintenanceExperience: 5 to 10 YearsLocation: Mumbai SuburbanAnnual Salary: 6 7.5 LPAJob Summary:We are seeking an experienced and proactive Electrical Maintenance Head to oversee and lead our electrical maintenance department. The ideal candidate will be responsible for ensuring smooth operation, timely maintenance, and compliance with safety standards across all electrical systems within the facility.Key Responsibilities Area:Lead and manage the electrical maintenance teamPlan, schedule, and execute preventive and corrective maintenanceTroubleshoot and resolve electrical issues across Transformer, panels, and SwithgearsEnsure minimal downtime of operations due to electrical failuresMaintain safety compliance as per statutory and company standardsCoordinate with external contractors and vendors as requiredMaintain detailed documentation of maintenance logs and equipment historyDesired Candidate Profile:Degree/Diploma in Electrical Engineering5 to 10 years of hands-on experience in electrical maintenance, preferably in a manufacturing/industrial environmentStrong knowledge of electrical systems, panels, drives, and safety protocolsLeadership skills with experience in handling a teamAbility to respond effectively to emergencies and breakdownsCompensation: 6 to 7.5 Lakh per annum (based on experience and qualification)

We are seeking an experienced Production Engineer to join our manufacturing team. The successful candidate will be responsible for optimizing production processes, improving efficiency, and ensuring the quality of our products.Key Responsibilities:1. Process Optimization:- Analyze and improve production processes to increase efficiency and reduce costs.- Implement lean manufacturing principles and techniques.2. Equipment Maintenance and Improvement:- Ensure proper maintenance and repair of production equipment.- Identify opportunities for equipment upgrades and improvements.3. Quality Control:- Develop and implement quality control processes to ensure product quality.- Collaborate with the quality team to resolve quality issues.4. Production Planning and Scheduling:- Create and manage production schedules to meet customer demand.- Collaborate with the production team to ensure smooth production operations.5. Cost Reduction and Budgeting:- Identify opportunities for cost reduction and implement cost-saving initiatives.- Develop and manage budgets for production-related expenses.6. Safety and Compliance:- Ensure compliance with safety regulations and company policies.- Identify and mitigate potential safety hazards.

Planning and Production : M/F, minimum qualification Professional Graduate ( BE/B Tech ) in Mechanical Engineering with 08-10 years or DME with 10-12 Years experience in Power Sector ( Panel Manufacturing / Sheet Metal Industry ) Should be well conversant with Raw Materials / Grades, Rates etc. Should understand sheet metals / press and machining products and it's applications, market knowledge. Should be able to handle Vendor Management.