ITI Jobs

Greeting From Vishakan Placement Service!!! Hiring Senior Process Operator Position: Junior Process Operator - E-Waste Chemical RecoveryDepartment: Production / Process OperationsIndustry: E-Waste Chemical RecoveryOnly Experience: 2-4 years in chemical/process plants, metal recovery, e-waste recycling or related industries; freshers may be considered.Qualification: ITI /Any Diploma /B.E Chemical Engineering, B.E Mechanical Engineering & Bsc. Chemistry background preferred.Shift Timing: 8 Hrs Rotational 1- Rotational Week-Off Reports To: Shift In-Charge / Production SupervisorJOB DESCRIPTION - Sr.PROCESS OPERATOR1. Operate e-waste recycling process equipment as per SOP and instructions from the Process Controller/Supervisor.2. Receive, prepare, and charge raw materials into designated tanks/reactors as per batch requirements.3. Verify raw-material quantity, batch number, tank number, and charging sequence before operation.4. Handle and charge process chemicals safely as per approved SOP and required quantities.5. Operate tanks, reactors, agitators, pumps, valves, filters and related process equipment.6. Monitor process parameters such as pH, temperature, tank level, pressure, flow, and process time.7. Carry out tank-to-tank material transfer and ensure correct pipeline and valve alignment.8. Operate filtration equipment and monitor filtration flow, pressure, and performance.9. Collect, handle, and transfer filter cake/solid material without batch contamination.10. Perform routine inspection of tanks, pumps, filters, pipelines, valves, and other equipment.11. Report equipment breakdowns, leaks, spills, abnormal reactions, or process deviations immediately.12. Take process samples and maintain required process and production records.13. Maintain accurate records of raw materials, chemicals, production quantities, filtration, and material transfers.14. Follow all safety procedures, PPE requirements, chemical-handling practices, and housekeeping standards.15. Support the Process Controller/Supervisor in achieving safe, efficient, and continuous production.Fixed Salary:25 K - 35 K CTC + ESI+ PF + Medical Insurance Overtime (OT) Policy - OT eligibility and applicable OT rates 1.5 TimesAllowances - attendance allowance, Chemical AllowancesCab / Transportation Facility - based on the timing and pick up from dedicated pointsAccommodation - Near Kandigai / Oragadam ( Company Provided)Food Facility / Meal Allowance - BF, Lunch and Dinner based shift basis and We provided on subsidy for the foodNo of openings: 40Male candidate only Age limit: Till 35Interview Process: HR Round-Technical Round Immediate Joiner Must Work Location:, Oragadam, Ezhichur Village(Sriperumpudur Taluk,Kanchipuram(DT) - 603204)If Candidate Interested For Job Please Call Immediately & share your Cvs Call/Whatsapp: Vishakan Placement Service HR Pradeep

Operate CNC Turning machine as per production requirements.Set and adjust tools, workpiece and machine parameters.Read and understand engineering drawings.Check component dimensions using Vernier, Micrometer and other measuring instruments.Maintain required quality and accuracy of components.Follow production targets and work schedules.Carry out basic machine cleaning and maintenance.Follow all safety and workplace procedures.

We are seeking a motivated and skilled ITI Fitter to join our team in Dhanbad, India. This role is ideal for freshers with a background in ITI, looking to start their careers in a dynamic work environment.Key Responsibilities:- Fabrication and Assembly: You will be responsible for fabricating and assembling mechanical components. This involves using hand tools and machinery to create parts that meet specific design specifications.- Maintenance and Repair: The role includes regular maintenance and repair of machinery and equipment. You will troubleshoot issues and ensure that all tools are in optimal working condition.- Quality Control: You will perform quality checks on finished products to maintain high industry standards. Attention to detail is essential to ensure that all fittings comply with safety regulations.- Collaborative Work: You will work closely with other team members and departments. Effective communication is vital to ensure that projects progress smoothly and deadlines are met.Required Skills and Expectations:Candidates should have completed their ITI certification and possess strong technical skills. A good understanding of mechanical systems and basic math skills is essential. Being detail-oriented and having a problem-solving mindset will greatly aid in performing tasks effectively. As this position requires working in a team, good communication skills and the ability to follow instructions are necessary. Additionally, candidates should be reliable, punctual, and committed to maintaining safety in the workplace.

Position: VMC Machine OperatorKey Responsibilities:Operate VMC machines as per production plan and work instructions.Set and operate machines using appropriate tools, fixtures, and cutting parameters.Perform component loading/unloading and tool offset corrections.Read and understand engineering drawings, dimensions, and tolerances.Conduct in-process inspection using Vernier, Micrometer, Bore Gauge, etc.Maintain required production output and quality standards.Identify tool wear, machine abnormalities, and dimensional deviations.Follow 5S, safety procedures, and quality systems.Maintain basic machine and production records.Qualification: ITI / Diploma - Mechanical preferred.Experience: 2-10 years in VMC operation, preferably in a precision manufacturing/valve industry.

We are seeking a skilled Information Technology Engineer to join our team in Gwalior. The ideal candidate will have 2 to 5 years of experience and an I.T.I. qualification, ready to contribute to our IT projects in a full-time office environment.Key Responsibilities:1. System Maintenance: Ensure that all IT systems run smoothly and efficiently by performing regular maintenance and troubleshooting issues to minimize downtime.2. Network Management: Manage and support network infrastructure, including servers, firewalls, and routers, to ensure secure and reliable connectivity for all users.3. Technical Support: Provide technical support to staff and end-users by resolving hardware and software issues in a timely manner, enhancing overall productivity.4. Installation and Configuration: Install and configure computer systems and software applications as per organizational requirements, ensuring optimal performance and security.5. Documentation: Maintain accurate records of system configurations, issues, and resolutions to provide reliable documentation for future reference and compliance.Required Skills and Expectations:The candidate should have a thorough understanding of computer systems, networking, and troubleshooting techniques. Strong problem-solving skills and the ability to work under pressure are essential. Effective communication skills are necessary for interacting with team members and end-users. A proactive approach to learning new technologies and keeping up with industry trends will be highly valued.

As a Customer Care Executive, you will play a crucial role in ensuring customer satisfaction by addressing inquiries and providing support. Your responsibilities will include:- Responding to Customer Inquiries: Engage with customers via phone, email, or in-person to answer their questions and resolve issues promptly.- Providing Product Information: Share details about our products and services to help customers make informed decisions.- Handling Complaints: Listen to customer concerns and address them effectively, ensuring a positive experience even when resolving issues.- Processing Orders: Assist customers in placing orders, tracking shipments, and understanding billing procedures to streamline their purchasing experience.- Maintaining Customer Records: Accurately document customer interactions and maintain updated records for future reference and follow-up.- Collaborating with Team Members: Work together with your colleagues to ensure consistent and high-quality service delivery.To be successful in this role, candidates should possess the following skills and qualifications:- Educational Background: A minimum of I.T.I. is required to fulfill the educational criteria for this position.- Communication Skills: Excellent verbal and written communication abilities are essential for effectively engaging with customers.- Problem-solving Abilities: Strong analytical skills to identify customer needs and develop appropriate solutions.- Attention to Detail: Meticulous attention to detail to ensure customer requests are accurately handled.- Team Player: Willingness to collaborate and support teammates, contributing to a positive work environment.This role is ideal for individuals with 0 to 1 year of experience who are eager to learn and grow in a customer-focused setting, as it requires working from our Salem office location.

We are looking for a dedicated Auto CAD Draughtsman to join our team in Bopal, Ahmedabad. This entry-level position is ideal for fresh graduates with a passion for design and drafting.Key Responsibilities:1. Creating Technical Drawings: You will use AutoCAD software to produce detailed engineering drawings and plans based on specifications provided by engineers or designers.2. Modifying Existing Plans: You will assist in updating and modifying existing drawings to reflect changes in design, materials, or dimensions as needed.3. Collaborating with Team Members: You will work closely with engineers and other draughtsmen to ensure all project requirements are met and that designs adhere to relevant standards and specifications.4. Maintaining Documentation: You will maintain accurate records of all drawings and related documents for easy access and reference by team members.Required Skills and Expectations:Candidates should have completed I.T.I. certification and possess basic knowledge of AutoCAD software. A keen eye for detail and accuracy is essential, as well as the ability to work independently and as part of a team. Strong communication skills are important for effective collaboration with other staff. This position is full-time and requires the selected candidate to work from the office, promoting a professional environment for growth and learning.

We are seeking a dedicated Personal Secretary to support our team in Sector 143. The ideal candidate will assist with various administrative tasks while showcasing a proactive and organized approach to work.Key Responsibilities:- Manage Calendars: Schedule and organize meetings, ensuring all necessary materials and information are prepared in advance.- Communication Handling: Act as the primary point of contact for internal and external communications, handling phone calls, emails, and messages efficiently.- Document Preparation: Assist in preparing reports, presentations, and other documents, ensuring accuracy and professionalism.- Data Management: Maintain organized files and databases, ensuring easy access to important information and records.- Travel Coordination: Assist in arranging travel schedules, accommodations, and itineraries for team members as needed.Required Skills and Expectations:The candidate should have a minimum education of I.T.I. and demonstrate excellent verbal and written communication skills. Proficiency in basic computer applications and office software is essential for efficient task completion. A strong attention to detail and the ability to prioritize tasks in a busy environment are crucial. The candidate should also be a quick learner, capable of adapting to new tasks and tools with ease. Being approachable and maintaining a positive attitude in all interactions is vital for success in this role. Only female candidates will be considered for this position, and understanding professionalism in the workplace is expected.

Key ResponsibilitiesAssemble and fit mechanical components, parts, and equipment as per drawings and specifications.Read and interpret engineering drawings, blueprints, and assembly instructions.Perform drilling, tapping, cutting, grinding, and other fitting operations.Use hand tools, power tools, and measuring instruments effectively.Inspect components and assemblies to ensure dimensional accuracy and quality standards.Carry out equipment installation, maintenance, and repair activities.Identify and troubleshoot mechanical issues during assembly and installation.Ensure proper alignment and fitting of machine parts.Maintain workplace safety, cleanliness, and adherence to company policies.Coordinate with production, quality, and maintenance teams to achieve operational targets.

We are looking for experienced Machine Technician for Sulur FactoryJob ResponsibilitiesSupport Production equipment, machinery and manufacturing processes.Perform equipment setup, troubleshooting, repair and maintenance.Identify equipment problems and carry out corrective actions.Perform preventive maintenance according to schedule.Support Installation and improvement of production equipment.Maintain equipment and maintenance records.Follow all safety,quality and house keeping requirements.

We are looking for a dedicated Electrician to join our team in Jamnagar. This role is ideal for candidates who have recently completed their I.T.I. and are eager to start their career in electrical work. Key Responsibilities:- Installation of Electrical Systems: You will be responsible for setting up electrical wiring and fixtures in new buildings or during electrical upgrades, ensuring they meet safety standards.- Maintenance and Repair: Conduct regular inspections and repairs on electrical equipment and systems to ensure they are functioning correctly and safely. - Troubleshooting: Identify electrical problems by testing circuits and electrical systems, using tools and diagnostic equipment to determine the causes of issues.- Collaboration with Team: Work together with other technicians and team members to complete projects efficiently, sharing skills and knowledge to enhance overall productivity.- Compliance with Safety Standards: Follow industry regulations and safety protocols while performing electrical tasks, ensuring a safe working environment.Required Skills and Expectations:- A completed I.T.I. in Electrical Engineering or a related field is necessary. - Basic knowledge of electrical systems, wiring, and safety practices.- Strong problem-solving skills and attention to detail to identify and fix issues effectively.- Ability to work as part of a team, alongside other electricians and professionals.- Good communication skills to interact with coworkers and understand job instructions clearly.Candidates with 0 - 1 years of experience are welcome to apply.

Bharadwaj Ventures Pvt. Ltd. - Hiring ITI FitterPosition: ITI FitterJob DescriptionRepair and service fitness equipment.Install fitness equipment at customer sites.Diagnose equipment issues and perform maintenance.Travel to customer locations as required.Candidate RequirementsITI qualification in Fitter trade.Basic technical and mechanical knowledge.Must own a two-wheeler.Must have a valid driving licence.Willingness to travel for field-service assignments.Interested candidates can apply by sharing their resume and contact details.

Main Duties of a Fire TechnicianFire Fighting System MaintenanceFire hydrant and hose reel systemsFire pumps, jockey pumps and diesel pumpsSprinkler systemsFire extinguishersFire alarm and detection systemsFire suppression systemsInspection & TestingRegularly inspect fire equipment and installations.Test fire pumps and fire alarm systems.Check pressure, valves, pipes, hydrants and sprinklers.Identify faults and arrange repairs.Preventive MaintenanceFollow daily/weekly/monthly maintenance schedules.Lubricate and service pumps and mechanical equipment.Replace damaged or expired fire equipment.Emergency ResponseRespond quickly to fire alarms and emergencies.Operate fire-fighting equipment during incidents.Assist in evacuation and emergency response.Coordinate with the fire & safety/security team.DocumentationMaintain inspection and maintenance records.Record fire pump readings and equipment status.Maintain fire extinguisher/service records.Prepare reports for management and safety audits.Safety & ComplianceEnsure fire systems are always operational.Support fire drills and emergency preparedness.Follow applicable fire-safety procedures and statutory requirements. Typical QualificationITI/Diploma in Fire & Safety, Electrical, Mechanical or related trade.Experience in fire-fighting systems, fire pumps and fire alarm systems is preferred.Knowledge of basic electrical/mechanical troubleshooting.Physically fit and willing to work in shifts. For recruitment, a good Fire Technician should ideally knowFire Pump + Hydrant + Sprinkler + Fire Alarm + Fire Extinguisher + Troubleshooting + Preventive Maintenance + Emergency Response.

We are looking for an Auto CAD Designer with 1 to 3 years of experience, who holds an I.T.I. qualification and is willing to work full-time from our office located in Sector 30.Key Responsibilities:- Drafting Technical Drawings: Create accurate and detailed technical drawings using Auto CAD software to meet project specifications and standards.- Collaborating with Engineers: Work closely with engineers and project managers to understand design requirements and incorporate their feedback into the drawings.- Revising Designs: Make necessary revisions and updates to existing designs based on feedback, ensuring that all plans are current and reflect any changes accurately.- Maintaining Drawing Files: Organize and maintain a systematic filing system for drawings and design documents to facilitate easy retrieval and reference.- Quality Control: Conduct regular checks on drawings to ensure they meet quality standards and specifications, minimizing errors.Required Skills and Expectations:The ideal candidate should have a strong understanding of Auto CAD software and possess good visualization skills to effectively translate ideas into technical drawings. Attention to detail is crucial to ensure accuracy in each design. The candidate should also demonstrate the ability to work effectively within a team environment, possessing good communication skills to relay ideas and receive feedback. Time management skills are necessary to meet project deadlines and handle multiple tasks efficiently. A proactive attitude toward problem-solving is highly valued.

Job Title : Sheet Line Extruder OperatorExperience : 4 YearsJob Location : PondicherryRole & Responsibilities :Operate and monitor plastic sheet extrusion machines.Set temperature, screw speed, line speed and sheet thickness as per specifications.Monitor extruder, die, roll stack and downstream equipment.Check sheet thickness, dimensions and overall product quality.Handle raw materials/resins and perform die, screen and roll adjustments.Carry out minor troubleshooting and routine preventive maintenance.Maintain production and quality records.Follow all safety and PPE requirements.Qualification & Skills :Qualification: ITI / DME / DEE / High School.4+ years of extrusion line operating experience preferred.Knowledge of plastic resins/polymers such as PP & PS.Good mechanical aptitude and attention to detail.

Job Title : Thermoforming Machine OperatorExperience : 4 yearsJob Location : PondicherryRole & Responsibilities :Set up, operate and adjust thermoforming machines.Load sheet/roll material and monitor machine performance.Check finished products for quality, defects and dimensions.Perform trimming, cutting and basic troubleshooting.Conduct routine maintenance and maintain production records.Follow safety and PPE guidelines.Qualification & Skills :Qualification: High School / ITI / DME / DEE.Relevant thermoforming, plastics or manufacturing experience preferred.Good mechanical aptitude and attention to detail.

Job Title: Industrial ElectricianExperience : 2 - 3 Years as industrial electricianJob Location : Mavli, RajasthanRole & Responsibilities:Install, maintain, and repair industrial electrical systems and equipment.Troubleshoot electrical faults and ensure timely resolution.Perform preventive and breakdown maintenance of machines.Read and interpret electrical drawings, diagrams, and schematics.Ensure proper functioning of motors, control panels, and electrical circuits.Follow electrical safety standards and company policies.Maintain maintenance records and report issues to supervisors.Qualification & Skills :ITI/Diploma in Electrician or related field.2-3 years of experience as an Industrial Electrician.Knowledge of industrial wiring and electrical systemsTroubleshooting and maintenance skills.Ability to read electrical drawings.Basic knowledge of motors, panels, and control systems.Good problem-solving and teamwork skills.

As a QC Welding Inspector in Kanpur, you will play a crucial role in ensuring the quality and reliability of welding processes and products. Your primary responsibilities will include:- Inspecting Welds: Regularly assess welded joints to ensure they meet specified standards and specifications, identifying any defects or inconsistencies.- Conducting Tests: Perform non-destructive tests such as ultrasonic, magnetic particle, or liquid penetrant tests to evaluate the integrity of welds.- Documentation: Maintain detailed records of inspections, tests, and findings to ensure compliance with industry standards and regulations.- Collaboration: Work closely with welders and other production staff to address any issues or improvements needed in the welding process.- Reporting: Prepare reports summarizing inspection results, recommending corrective actions as necessary to enhance quality.To be successful in this role, you should possess:- Educational Background: An I.T.I. certification in Welding or a related field, demonstrating your technical knowledge and skills in the field.- Experience: 1 to 5 years of hands-on experience in welding inspection, showcasing your familiarity with various welding techniques and standards.- Attention to Detail: Strong observational skills to spot defects and issues in welding that may not be immediately visible.- Communication Skills: Ability to convey findings clearly to team members and management, fostering a collaborative environment.- Problem-solving Abilities: Aptitude for identifying issues in welding and recommending solutions effectively to enhance quality and safety.

As a QC Welding Inspector, you will ensure the quality and safety of welding processes and structures in our projects. Your primary focus will be on inspecting welds and ensuring that they meet the required standards.Key Responsibilities:- Weld Inspection: Regularly examine welded joints to check for defects, ensuring compliance with technical specifications and standards.- Documentation: Maintain detailed records of inspections, including reports of non-conformance and corrective actions taken.- Quality Standards Compliance: Ensure that all welding activities adhere to relevant quality standards and regulations to guarantee safety and reliability.- Collaboration: Work closely with the welding team and engineers to provide feedback on welding practices and suggest improvements.- Training Support: Assist in training and guiding new staff on welding inspection techniques and quality control processes.Required Skills and Expectations:- Educational Background: Candidates should have completed I.T.I. in a relevant field.- Experience: A minimum of 1 to 5 years of experience in welding inspection, with a solid understanding of welding processes and standards.- Technical Skills: Familiarity with various welding techniques and inspection tools is essential.- Attention to Detail: Ability to spot defects or issues in welds, ensuring all work meets quality expectations.- Communication Skills: Strong verbal and written communication skills to effectively report findings and collaborate with team members.- Gender Specification: This role is specifically for male candidates, as per organizational requirements.

We are looking for a QC Welding Inspector to join our team in Ludhiana. The ideal candidate should have experience in quality control, particularly in welding processes, and will be responsible for ensuring that all welding work meets strict quality standards. Key Responsibilities:- Inspect Welding Work: Review and assess completed welding tasks to ensure they meet specifications and quality standards.- Conduct Tests: Perform various inspections and tests, such as visual evaluations and non-destructive tests, to confirm the integrity of welds.- Document Findings: Maintain detailed records of inspections, test results, and compliance with standards to ensure traceability and quality assurance.- Report Issues: Identify and report any defects or issues in welding to the relevant teams for corrective actions.- Collaborate with Teams: Work closely with welders and engineers to communicate inspection results and provide constructive feedback for improvement.- Stay Updated: Keep current with welding standards and quality control regulations to ensure compliance with industry requirements.Required Skills and Expectations:- Candidates should have an ITI certification and a minimum of 1-5 years of experience in a welding quality control role.- Strong knowledge of welding processes, techniques, and materials is essential.- Good observation and analytical skills to accurately identify defects.- Ability to interpret technical drawings and specifications.- Effective communication skills to relay information clearly to team members and management.- Must be able to work from the office and contribute to a team-oriented environment.

We have job Vacancy for the post of Architect & Interior Designer in Ahmedabad.Fresher or up to 1 year experience candidate can apply.Educational Qualification : I.T.I., B.Arch, B.E, B.Tech or renowned institutional degree coursesRequired Skills : Autocad, Drafting, Drawing, Sketchup, 3dsmax, 3d, Google Sketchup, Working Drawings, Vray, Revit etc.

Candidate must have basic knowledge of materials, CAD and 3D knowledge.

Candidate has basic knowledge of materials, good knowledge of CAD, Sketchup knowledge with rendering on Lumion or Enscape. Candidate have to work for Residential, Commercial and Industrial work.

Greeting From Vishakan Placement Service Hiring ITI- Diploma mechanical candidate For Quality Engineer & Quality Online Inspection (Dy.Technician) Position in our leading Automotive Industry Tiruvallur Industry:Automotive Industry,Sheet Metal, Machining and Manufacturing Industry- Automobile component manufacture Role : Quality Online Inspection(Dy.Technician) Qualification: ITI/Diploma/B.E-B.Tech Mechanical/AutomobileExperience : Quality Online Inspection (2-4 Yrs) Skills: Strong knowledge in Quality Online inspection knowledge, good attitude and behavior, willing to work rotational shift Fixed Salary: 15K-18k Inhand -Fresher #Quality Online Inspection-20 K-30 K CTC+ESI+PF Benefits(Experience)Shift Timing : 06.00 am to 2.30 pm - 1st shift02.00pm to 09.50 pm - 2nd shift 09.50pm to 06.00am - 3rd shift 09.00 am to 05.30 pm & General shift Sunday Week OffTransport Facilities: Thiruvallur Railway StationThiruninravur Railway stationNo of openings: 50+Interview Schedule : Monday - Saturday / 10 AM- 12 PM & 2 PM-4 PM Interview Timing Interview Process: Direct Walkin Interview- HR Round - Technical Round - MD Round Immediate Joiner Must Work Location : Tiruvallur Candidate Preferred Location: Thiruvallur,Thirumazhisai,Poonamallee,Veppampattu,Thiruniravur, Sriperumbudur, thirumudivakkam,nemili,manavalanagar.Interested Candidate For Job Please kindly call immediately HR Pradeep -Vishakan Placement Service

We are seeking a skilled Fitter to join our team in Viman Nagar. The ideal candidate will have between 1 to 5 years of experience and must hold an I.T.I. certification. This full-time position requires the candidate to work on-site.**Key Responsibilities:**- **Assembly of Parts**: Build and fit mechanical components according to specifications, ensuring they work together seamlessly.- **Maintenance and Repair**: Conduct regular maintenance checks to identify wear and tear, making necessary repairs to prevent downtime.- **Reading Technical Drawings**: Utilize blueprints and technical drawings to understand project requirements and execute tasks accurately.- **Quality Control**: Inspect finished work to ensure it meets quality standards, making adjustments as necessary to maintain perfection.- **Collaboration**: Work closely with other team members and departments to facilitate smooth project completion and support overall company objectives.**Required Skills and Expectations:**The ideal candidate should have a strong background in mechanical fitting, with hands-on experience in assembling and repairing machinery. A solid understanding of mechanical drawings and blueprints is essential. Attention to detail and a commitment to delivering high-quality work are vital for success in this role. Good communication skills are necessary to interact effectively with colleagues and follow safety protocols. The ability to be adaptable and work under pressure is important, as well as a proactive approach to problem-solving. Candidates must be male and prepared to work in a collaborative office environment.

Position: Facility Executive - TechnicalDepartment: Facility Management / OperationsReports To: Facility Manager / Assistant Facility ManagerLocation: Client SiteEmployment Type: Full-Time / Shift-BasedJob PurposeTo ensure the smooth, safe and efficient operation and maintenance of all technical and engineering systems at the facility, while maintaining service quality, statutory compliance and client satisfaction.Key ResponsibilitiesSupervise day-to-day operation and maintenance of electrical, mechanical, HVAC, plumbing and other MEP systems.Monitor DG sets, HT/LT panels, transformers, UPS, batteries, pumps, motors, AHUs, FCUs, chillers and HVAC systems.Conduct regular inspection of equipment and identify faults or potential breakdowns.Ensure preventive and corrective maintenance is carried out as per schedule.Attend breakdowns and coordinate with technicians/vendors for timely rectification.Monitor energy consumption and identify opportunities for cost and energy savings.Maintain equipment logbooks, maintenance records, checklists and daily reports.Ensure availability of spares, consumables and maintenance tools.Supervise technicians and allocate daily work responsibilities.Coordinate with external AMC vendors and service agencies.Ensure compliance with electrical, fire & life-safety and other statutory requirements applicable to the facility.Support facility inspections, audits and emergency drills.Follow all EHS and safety procedures and ensure safe working practices by the technical team.Handle client complaints and ensure timely closure of technical service issues.Prepare daily/weekly/monthly technical reports for the Facility Manager.Required SkillsGood knowledge of MEP and building services.Electrical and mechanical troubleshooting skills.Knowledge of HVAC, DG, UPS, pumps and electrical distribution systems.Team supervision and vendor coordination.Basic computer/MS Excel and reporting skills.Good communication and client-handling ability.Ability to work in rotational shifts, where required.Qualification & ExperienceQualification: ITI / Diploma / B.Tech in Electrical, Mechanical or related technical discipline.Experience: 2-5 years in Facility Management, Building Maintenance, Commercial Complex, Mall, Hospital, Hotel, Factory or similar environment.Key Performance Indicators (KPIs)Equipment uptime and breakdown response timePreventive maintenance completion %Breakdown closure timeEnergy consumption and savingsSafety complianceClient complaint resolutionDocumentation and reporting accuracyTechnician productivityVendor/AMC performanceIdeal candidate: A technically hands-on professional who can manage technicians, troubleshoot equipment, coordinate vendors and keep the entire facility running without disruption.

We are looking for an STP Operator to manage and maintain our sewage treatment plant in Bhubaneswar. The ideal candidate should have 2 to 5 years of experience and hold an I.T.I. certification. This full-time position involves hands-on work in the office environment of the treatment facility.Key Responsibilities:1. **Monitor Plant Operations**: Regularly check the equipment and systems in the sewage treatment plant to ensure everything is functioning properly. This includes observing flow rates, chemical levels, and other vital parameters.2. **Perform Routine Maintenance**: Conduct scheduled maintenance on machinery and equipment to prevent downtime and ensure optimal performance. This may involve cleaning, lubricating parts, and repairing equipment as necessary.3. **Report Irregularities**: Identify and document any issues or irregularities in the treatment process and report them to senior operators or management for immediate action.4. **Maintain Safety Standards**: Follow safety protocols and guidelines to ensure a safe working environment for yourself and your co-workers. This includes wearing the necessary protective gear and handling chemicals safely.5. **Data Recording**: Keep precise records of daily operations, including input and output measurements, maintenance performed, and any incidents that occur during shifts.Required Skills and Expectations: Candidates should possess strong analytical skills and the ability to troubleshoot equipment issues efficiently. Attention to detail and a commitment to safety are essential. Good communication skills are also important to work effectively within a team and report findings to supervisors.

We are looking for a Multi Skill Technician with 1 to 3 years of experience who is eager to work from home in Janla, Bhubaneswar. This role requires hands-on skills in various technical fields and the ability to solve problems effectively.Key Responsibilities:1. **Maintenance and Repair**: You will be responsible for troubleshooting and fixing mechanical and electrical issues in equipment and machinery, ensuring they operate smoothly.2. **Installation**: You will assist in installing new equipment, ensuring proper setup, alignment, and functioning according to specifications.3. **Regular Inspections**: You will perform routine inspections on machinery and equipment to identify any potential issues before they become serious problems.4. **Documentation**: You will maintain accurate records of repairs, maintenance schedules, and any modifications made to equipment to ensure compliance with standards.5. **Collaboration**: You will work closely with other team members to ensure effective communication and coordination for project completion.Required Skills and Expectations:Candidates should be skilled in both electrical and mechanical aspects of machinery. A strong understanding of tools and equipment is essential. You should be detail-oriented, have good problem-solving skills, and be able to work independently. Excellent communication skills and the ability to prioritize tasks are also important for this role. A background with an I.T.I. certification is required, along with a passion for technical work and a proactive attitude towards learning and development.

Key ResponsibilitiesAssemble and fit mechanical components, parts, and equipment as per drawings and specifications.Read and interpret engineering drawings, blueprints, and assembly instructions.Perform drilling, tapping, cutting, grinding, and other fitting operations.Use hand tools, power tools, and measuring instruments effectively.Inspect components and assemblies to ensure dimensional accuracy and quality standards.Carry out equipment installation, maintenance, and repair activities.Identify and troubleshoot mechanical issues during assembly and installation.Ensure proper alignment and fitting of machine parts.Maintain workplace safety, cleanliness, and adherence to company policies.Coordinate with production, quality, and maintenance teams to achieve operational targets.

Key ResponsibilitiesPerform CO2 and TIG welding operations according to engineering drawings and work instructions.Prepare, align, and fit metal components before welding.Interpret fabrication drawings, weld symbols, and specifications.Set up welding equipment and select appropriate welding parameters.Inspect welded joints for quality, accuracy, and compliance with standards.Repair or rework defective welds as required.Use measuring instruments and welding tools to ensure dimensional accuracy.Maintain welding equipment and perform routine maintenance checks.Follow workplace safety regulations and use appropriate PPE.Maintain cleanliness and organization of the work area.

Key ResponsibilitiesSet up and operate CNC bending machines and related equipment.Read and interpret engineering drawings, blueprints, and work instructions.Select appropriate tooling and machine parameters for bending operations.Perform machine adjustments to achieve required dimensions and tolerances.Inspect finished components using measuring instruments such as calipers, gauges, and micrometers.Monitor production quality and identify defects or deviations.Conduct routine machine maintenance and cleaning activities.Maintain accurate production records and reports.Follow workplace safety, quality, and housekeeping standards.Coordinate with production supervisors, quality inspectors, and maintenance teams to ensure smooth operations.

Hiring for 1 Personal Secretary Job in Noida Sector 143, for Freshers,Required Educational Qualification is : I.T.I., B.Arch, B.C.A, B.B.A, B.Com, B.Ed, BDS, BAMS, Bachelor of Hotel Management with Good knowledge in Company Affairs, Computer Graphics, Computer Networking, Secretarial Skills, Drafting, Secretarial Activities etc.