Embedded Testing Engineer Jobs

Electronics Testing AssistantQualification: Diploma / ITI / B.Tech in Electronics, Electronics & Communication, Instrumentation, or a related field.Job SummaryWe are looking for a detail-oriented Electronics Testing Assistant to support product testing, troubleshooting, validation, documentation, installation, commissioning, and customer support. The role involves both laboratory and field work, including travel to customer sites across India.Key ResponsibilitiesPerform functional, performance, reliability, and environmental testing of electronic products.Troubleshoot hardware and embedded systems and assist in root cause analysis.Support hardware assembly, wiring, integration, and test setup.Operate test equipment including multimeters, oscilloscopes, power supplies, signal generators, and spectrum analyzers.Conduct PCB testing, debugging, firmware loading, device configuration, and software validation.Maintain test records, reports, calibration logs, and quality documentation.Coordinate with Engineering, R&D, and Quality teams during product validation.Visit customer sites for installation, commissioning, alignment, testing, troubleshooting, and preventive maintenance.Prepare installation, commissioning, and site visit reports while providing technical support during deployments and customer acceptance testing.Required SkillsKnowledge of analog & digital electronics.Hardware testing, PCB debugging, and embedded systems.Ability to read schematics and wiring diagrams.Familiarity with oscilloscopes, multimeters, power supplies, and laboratory instruments.Basic networking (Ethernet, TCP/IP).MS Office proficiency.Strong troubleshooting, analytical, communication, and documentation skills.Willingness to travel extensively across India.Preferred SkillsExperience in electronics testing, validation, or quality assurance.Knowledge of RF, Optical Communication, LiFi, Wireless Communication, or Networking.PCB soldering, rework, firmware flashing, and hardware debugging.Linux/Windows testing environments.Understanding of EMI/EMC, product qualification, and reliability testing.Additional RequirementsImmediate joiners preferred.Valid driving license is an advantage.Self-motivated, responsible, detail-oriented, and capable of working independently or in a team.

Role OverviewWe are looking for a motivated and detail-oriented Automotive Software Development Trainee Engineer to join our engineering team. The trainee will work on developing, testing, and maintaining embedded software systems used in modern vehicles, gaining hands-on experience with automotive technologies and standards.Key ResponsibilitiesAssist in the development of embedded software for automotive applications (ECUs, infotainment, ADAS systems).Support software design, coding, debugging, and unit testing activities.Work with programming languages such as C, C++, or Python.Participate in software integration and validation processes.Collaborate with cross-functional teams including hardware, testing, and system engineers.Prepare and maintain technical documentation.Analyze and fix software defects under guidance from senior engineers.Required QualificationsBachelors degree in Electronics, Electrical, Computer Science, or related field (recent graduates preferred).Basic understanding of embedded systems and microcontrollers.Knowledge of programming in C/C++.Familiarity with software development lifecycle (SDLC).Strong analytical and problem-solving skills.Soft SkillsGood communication and teamwork abilities.Willingness to learn and adapt in a fast-paced environment.Attention to detail and quality-focused mindset.

The Embedded Hardware Engineer will be responsible for designing and developing embedded systems hardware components. This includes schematic design, PCB layout, prototype testing, and troubleshooting hardware issues. The engineer will also collaborate with the software team to ensure seamless integration of hardware and software components. Key responsibilities include designing and developing embedded systems hardware, creating schematics and PCB layouts using CAD tools, conducting prototype testing and debugging hardware issues, collaborating with cross-functional teams to ensure hardware and software integration, and staying updated on industry trends and advancements in embedded hardware technology.The ideal candidate should have a postgraduate degree in electronics or a related field, with 2-5 years of experience in embedded hardware design. Proficiency in CAD tools for schematic design and PCB layout, strong problem-solving skills, good communication skills, and the ability to work in a team are essential for this role. The candidate should also have a passion for learning and staying updated on new technologies in the embedded hardware field.

Basic Knowledge of Electronics,Basic Knowledge of Soldering,Basic Knowledge of Electronics Component,Basic Knowledge of QC and Testing

Design, Development, Qualification and deployment, maintenance of LabVIEW / Test Stand based automated Test Equipment's as per product requirement which includes Analog, digital & mixed circuits Test software development as per the requirements (LabVIEW/ Test Stand) Interface with customers to understand user requirements and Generate test specifications, Responsible to release controlled documents Creation of Test System Bill Of Material Analysing and validating material/component /parts selection w.r.t tolerances, performance, and manufacturability. Electrical/ Electronic Schematics preparation using AUTOCAD/ORCAD etc. Interface with production engineering / customer for successful design, development, deployment and maintenance of automated test equipments schematics and test management. Responsible to Maintain & update the project files Responsible to improve 5S & Kaizen initiatives Travel to client place for installation and support Shall handle customers You will be responsible for the delivery of the items assigned to you with quality and should interact with cross functional team and resolve the problem.

Job descriptionJob descriptionSkillEAGLE/ALTIUM PCB Software3D Case Fit Design DevelopmentStrong grip on the product manufacturing PipelineEMC TestingMust have hands-on experience with custom development boards like CC2640, NRF52840, STM32, And ESP32.Problem Solving SkillsRoles & ResponsibilitiesDevelop and verify schematic, board Files, and Gerber Data For Product Manufacturing.Develop PCB files in EAGLE & Altium With 3D Files for case fitting.Handling Product Manufacturing Flow, BOM Generation.Product QC according to firmware and product Requirement.Testing & Debugging WiFi & BLE & Cloud base Products.Test Case Generation & TestingKnowledge of Electronic Certificate Testing. Send Your C.V At savanl@spiculestech.comRole: Hardware EngineerEmployment Type: Full Time, PermanentIndustryIT Services and IT ConsultingEmployment TypeFull-time

#EmbeddedTestingEngineer #EmbeddedTesting #Embedded #Bangalore #Freshers Designation - Embedded Testing Engineer Location - Bangalore Qualification - BE/B.Tech in ECE,EEE,CSPassout - 2018/19/20/21/22 with 60% Aggregate Compulsory Preferred Male Candidate onlyCTC - 2.2 to 3 Lakhs Only Technical Skills Must - Integration Support and system management, Onsite installation and implementation for Embedded Systems

The chosen one will be Architecting & Developing IoT Solutions. Normal week may vary from working on circuit design to PCB review to API integration to server setup to debugging to anything that comes under the IoT umbrella.ResponsibilitiesIt's literal, you will be expected to respond to anything to the best of your abilities. Some of these are.Developing a high standard, quality firmware and debugging the existing for perfectionDiscussing, researching, and providing a solution for any requirement.Leading a project from scratch and delivering to clients. (End-to-End)Technical SkillsIoT Concepts & ProtocolsEmbedded C, C++FreeRTOSWireless TechnologiesSensors & ActuatorsAPI IntegrationCircuit & PCB DesignQualificationsWell, the biggest one is the right attitude. Ready to adapt, open to challenges & fun-loving. Others are.Great logical mindsetReady to work on different technologiesIn short, you need to be amazing overall for selection and be a part of a small but highly qualified team.

Skills -- Embedded C (Must), Microcontrollers (Must)- CAPL Programming (Must)- Embedded Testing - White Box testing (Must)- Vector ToolsResponsibilities - - Plans and designs software modules and test requirements and executes test specifications.- Completes estimates for modules under development.- Reviews customers' standards specification and other documentation to determine software engineering requirements.- Contributes to program and interface architecture.- Completes programming, or monitors completion of programs.- Ensures effective software quality testing, by completion of module, subsystem and system test procedures.- Specifies and manages hardware-in-the-loop simulation test benches.- Completes software documentation.- Consults in commissioning products in the field, in order to support responsible engineers.- Contributes on regular product, electronic or software related functionality reviews.

We are looking for 1 Senior Engineer Post in Delhi/NCR, Unit Testing, with deep knowledge in Core Java, Computer Science, AutoCAD, Finite Element Analysis, Embedded, Unit Testing and Required Educational Qualification is : Other Bachelor Degree

We have vacant of 15 Software engineers and designers Jobs in Canada Experience Required : 2 Years Educational Qualification : Diploma, Professional Degree, Other Bachelor Degree, B.C.A, B.B.A, M.A, M.C.A, M.Sc, M.Tech Skill computer software engineer,software architect,software testing engineer,systems integration engineer - software,application architect,embedded software engineer,technical architect - software,telecommunications software engineer etc.

Key role attributesJob Responsibilities:Create detailed and well-structured test plans and test cases.Writing Manual Test cases for the application against the requirements.Handling the testing project independently and reports to the Team lead.Develop and apply testing processes for new and existing products to meet client needs.Perform thorough regression testing when bugs are resolved.Troubleshooting quality issues and modifying test procedures.Verifying test result and logging defect in the tool.Executing the automation regression suites Sanity test cases against each build released.Must have 2 - 4 years of Manual Testing experience in Embedded Systems.Expertise in Functional and System Testing.Experience in communication protocols such as SPI, I2C etc.Experience in handling the LAB equipments for the Embedded Devices.Strong hands-on in Embedded Product Testing.Knowledge of Audio Testing is an added advantage.Strong knowledge of software QA methodologies, tools, and processes.Must possess strong written and oral communication skills.Must demonstrate consistent (and sustainable) application of problem solving and analytical skills.Qualifications3-6 yearsEmbedded QA engineering experience.Bachelor's degree in computer science or related technical disciplineSelf-motivated with the ability to drive features to deliveryStrong analytical and problem solving skillsExcellent oral and written communication skillsGood logical sense, strong technical skills and the ability to learn new technologies quickly

Required to perform Embedded Software Testing meeting software requirementsNeed to attend for selection physically.

We are hiring for Test EngineerBelow are the mandatory skills like1) Unit testing2) Integration Testing3)Embedded C4)White box testing5)Black box testing