Aviation Trainer Fresher Jobs in Bangalore

Job SummaryAn Aircraft Maintenance Engineer (AME) is responsible for inspecting, maintaining, repairing, troubleshooting, and certifying aircraft to ensure they are safe, airworthy, and compliant with aviation regulations. The role involves carrying out scheduled and unscheduled maintenance on aircraft systems, engines, avionics, electrical components, hydraulic systems, landing gear, and structural components while adhering to the standards established by aviation authorities.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine, preventive, scheduled, and unscheduled aircraft maintenance.Conduct daily, transit, weekly, A-check, B-check, C-check, and heavy maintenance inspections.Inspect aircraft structures, fuselage, wings, landing gear, flight controls, and engines.Diagnose and rectify aircraft defects using approved maintenance procedures.Replace, repair, and overhaul defective aircraft components.Ensure all maintenance tasks are completed according to the Aircraft Maintenance Manual (AMM).Troubleshooting & RepairsIdentify mechanical, hydraulic, electrical, pneumatic, and avionics faults.Use specialized diagnostic tools and testing equipment.Repair aircraft systems while maintaining manufacturer specifications.Coordinate with engineering teams for complex technical issues.Perform functional tests after repairs to verify serviceability.Engine & Component MaintenanceInspect aircraft engines for wear, leaks, corrosion, and damage.Perform engine servicing, oil changes, filter replacement, and component inspections.Maintain propellers, Auxiliary Power Units (APU), and fuel systems.Monitor engine performance and recommend corrective actions.Avionics & Electrical SystemsInspect communication and navigation systems.Maintain radar, autopilot, cockpit instrumentation, and electrical wiring.Test aircraft electronic systems for operational reliability.Ensure compliance with avionics maintenance procedures.Documentation & ComplianceComplete maintenance logs, inspection reports, and defect records.Maintain aircraft technical documentation accurately.Ensure compliance with aviation regulatory authorities.Certify aircraft for return to service after maintenance (where appropriately licensed).Follow company maintenance policies and quality assurance procedures.Safety & Quality AssuranceFollow all aviation safety regulations and standard operating procedures.Maintain clean and organized work areas.Ensure proper use of Personal Protective Equipment (PPE).Report safety hazards and technical discrepancies immediately.Participate in safety audits and quality inspections.Team CoordinationWork closely with pilots, technicians, quality inspectors, and operations staff.Coordinate maintenance schedules with flight operations.Assist junior technicians with technical guidance and training.Participate in emergency aircraft recovery and AOG (Aircraft on Ground) support.Required QualificationsDiploma or Bachelor's Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Mechanical Engineering, or Aerospace Engineering.DGCA-approved AME qualification or equivalent aviation authority certification is preferred.Valid Aircraft Maintenance Engineer License (where applicable).Type rating on specific aircraft is an advantage.Relevant experience in aircraft maintenance is preferred.Required SkillsStrong knowledge of aircraft systems and maintenance procedures.Excellent troubleshooting and fault diagnosis skills.Knowledge of aviation regulations and airworthiness standards.Ability to interpret aircraft maintenance manuals and engineering drawings.Strong analytical and problem-solving abilities.Excellent attention to detail.Good communication and teamwork skills.Ability to work under pressure and meet strict deadlines.Computer proficiency in maintenance management software.Good technical documentation skills.Technical KnowledgeAircraft StructuresGas Turbine EnginesHydraulic SystemsPneumatic SystemsElectrical SystemsAvionics SystemsFlight Control SystemsLanding Gear SystemsFuel SystemsAircraft DocumentationMaintenance PlanningAircraft Safety StandardsPreferred CertificationsDGCA Aircraft Maintenance Engineer LicenseEASA Part-66 License (preferred internationally)ICAO-compliant aviation trainingHuman Factors TrainingSafety Management System (SMS) TrainingFuel Tank Safety TrainingEWIS (Electrical Wiring Interconnection System) TrainingAircraft Type Rating CertificationWorking ConditionsAirport hangars, maintenance bases, and line maintenance stations.Rotational shifts including nights, weekends, and public holidays.Outdoor work in varying weather conditions.Physically demanding work involving standing, climbing, bending, and lifting equipment.Exposure to aircraft noise, fuels, lubricants, and hydraulic fluids while following strict safety procedures.Salary Range (India)Fresher: 3.5 - 6 LPA2-5 Years: 6 - 10 LPA5-10 Years: 10 - 18 LPALicensed/Type-Rated AME: 15 - 30+ LPA (depending on airline, aircraft type, and experience)

Job TitleAircraft Maintenance Engineer (AME)DepartmentAircraft Maintenance / EngineeringLocationsBangaloreMangaloreBelagaviBallariBidarHubliKalaburgiKoppalMysoreShivamoggaJob SummaryAn Aircraft Maintenance Engineer (AME) is responsible for inspecting, maintaining, repairing, troubleshooting, and certifying aircraft to ensure they are safe, airworthy, and compliant with aviation regulations. The role involves carrying out scheduled and unscheduled maintenance on aircraft systems, engines, avionics, electrical components, hydraulic systems, landing gear, and structural components while adhering to the standards established by aviation authorities.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine, preventive, scheduled, and unscheduled aircraft maintenance.Conduct daily, transit, weekly, A-check, B-check, C-check, and heavy maintenance inspections.Inspect aircraft structures, fuselage, wings, landing gear, flight controls, and engines.Diagnose and rectify aircraft defects using approved maintenance procedures.Replace, repair, and overhaul defective aircraft components.Ensure all maintenance tasks are completed according to the Aircraft Maintenance Manual (AMM).Troubleshooting & RepairsIdentify mechanical, hydraulic, electrical, pneumatic, and avionics faults.Use specialized diagnostic tools and testing equipment.Repair aircraft systems while maintaining manufacturer specifications.Coordinate with engineering teams for complex technical issues.Perform functional tests after repairs to verify serviceability.Engine & Component MaintenanceInspect aircraft engines for wear, leaks, corrosion, and damage.Perform engine servicing, oil changes, filter replacement, and component inspections.Maintain propellers, Auxiliary Power Units (APU), and fuel systems.Monitor engine performance and recommend corrective actions.Avionics & Electrical SystemsInspect communication and navigation systems.Maintain radar, autopilot, cockpit instrumentation, and electrical wiring.Test aircraft electronic systems for operational reliability.Ensure compliance with avionics maintenance procedures.Documentation & ComplianceComplete maintenance logs, inspection reports, and defect records.Maintain aircraft technical documentation accurately.Ensure compliance with aviation regulatory authorities.Certify aircraft for return to service after maintenance (where appropriately licensed).Follow company maintenance policies and quality assurance procedures.Safety & Quality AssuranceFollow all aviation safety regulations and standard operating procedures.Maintain clean and organized work areas.Ensure proper use of Personal Protective Equipment (PPE).Report safety hazards and technical discrepancies immediately.Participate in safety audits and quality inspections.Team CoordinationWork closely with pilots, technicians, quality inspectors, and operations staff.Coordinate maintenance schedules with flight operations.Assist junior technicians with technical guidance and training.Participate in emergency aircraft recovery and AOG (Aircraft on Ground) support.Required QualificationsDiploma or Bachelor's Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Mechanical Engineering, or Aerospace Engineering.DGCA-approved AME qualification or equivalent aviation authority certification is preferred.Valid Aircraft Maintenance Engineer License (where applicable).Type rating on specific aircraft is an advantage.Relevant experience in aircraft maintenance is preferred.Required SkillsStrong knowledge of aircraft systems and maintenance procedures.Excellent troubleshooting and fault diagnosis skills.Knowledge of aviation regulations and airworthiness standards.Ability to interpret aircraft maintenance manuals and engineering drawings.Strong analytical and problem-solving abilities.Excellent attention to detail.Good communication and teamwork skills.Ability to work under pressure and meet strict deadlines.Computer proficiency in maintenance management software.Good technical documentation skills.Technical KnowledgeAircraft StructuresGas Turbine EnginesHydraulic SystemsPneumatic SystemsElectrical SystemsAvionics SystemsFlight Control SystemsLanding Gear SystemsFuel SystemsAircraft DocumentationMaintenance PlanningAircraft Safety StandardsPreferred CertificationsDGCA Aircraft Maintenance Engineer LicenseEASA Part-66 License (preferred internationally)ICAO-compliant aviation trainingHuman Factors TrainingSafety Management System (SMS) TrainingFuel Tank Safety TrainingEWIS (Electrical Wiring Interconnection System) TrainingAircraft Type Rating CertificationWorking ConditionsAirport hangars, maintenance bases, and line maintenance stations.Rotational shifts including nights, weekends, and public holidays.Outdoor work in varying weather conditions.Physically demanding work involving standing, climbing, bending, and lifting equipment.Exposure to aircraft noise, fuels, lubricants, and hydraulic fluids while following strict safety procedures.Salary Range (India)Fresher: 3.5 - 6 LPA2-5 Years: 6 - 10 LPA5-10 Years: 10 - 18 LPALicensed/Type-Rated AME: 15 - 30+ LPA (depending on airline, aircraft type, and experience)

An Aircraft Technician is responsible for inspecting, maintaining, repairing, and testing aircraft systems and components to ensure safe and efficient aircraft operations. The technician works on mechanical, electrical, hydraulic, pneumatic, and avionics systems according to aviation safety standards and regulatory requirements.Aircraft Technicians perform scheduled maintenance, troubleshoot technical faults, replace defective parts, and certify aircraft readiness for flight under the supervision of licensed engineers when required.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine and scheduled aircraft maintenance checks.Inspect aircraft structures, engines, landing gear, and control systems.Conduct pre-flight, transit, daily, weekly, and periodic inspections.Identify defects, malfunctions, and mechanical issues.Repair & TroubleshootingDiagnose technical and mechanical faults in aircraft systems.Repair or replace damaged aircraft components and parts.Troubleshoot hydraulic, pneumatic, fuel, electrical, and engine systems.Use specialized testing and diagnostic equipment.Component InstallationInstall aircraft parts, instruments, wiring, and assemblies.Remove and replace aircraft engines or system components when required.Ensure all installations comply with aviation safety standards.Documentation & ReportingMaintain accurate maintenance logs and technical records.Complete inspection reports and work orders.Record all repairs, replacements, and maintenance activities.Ensure compliance with aviation authority regulations.Safety ComplianceFollow aviation safety procedures and maintenance manuals.Adhere to company policies and international aviation regulations.Ensure tools and equipment are properly calibrated and maintained.Maintain a clean and safe working environment.Team CoordinationWork closely with Aircraft Maintenance Engineers, pilots, and ground staff.Coordinate with technical supervisors and quality assurance teams.Assist during aircraft turnaround operations.Types of Aircraft Systems HandledAircraft EnginesHydraulic SystemsElectrical SystemsFuel SystemsBrake SystemsPneumatic SystemsLanding GearFlight Control SystemsCabin SystemsAvionics EquipmentRequired SkillsStrong mechanical and technical knowledgeTroubleshooting and problem-solving abilityKnowledge of aircraft systems and maintenance proceduresAbility to read technical manuals and engineering drawingsAttention to detail and accuracyGood communication and teamwork skillsTime management and multitasking abilitiesSafety awareness and compliance knowledgeEducational QualificationsDiploma or Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, or Aerospace EngineeringAME (Aircraft Maintenance Engineering) certification preferredDGCA/FAA/EASA-approved training is an advantageTechnical vocational training in aviation maintenance may also be acceptedExperience RequirementsFresherBasic knowledge of aircraft maintenance proceduresInternship or training experience preferredExperienced Technician1-5+ years of aircraft maintenance experienceExperience on commercial or private aircraftFamiliarity with aviation maintenance software and toolsCertifications PreferredDGCA AME LicenseFAA A&P LicenseEASA Part-66 LicenseHuman Factors & Safety TrainingFuel Tank Safety CertificationAviation Safety Management TrainingWorking EnvironmentAirportsAircraft hangarsMaintenance workshopsAviation maintenance organizations (MRO)Airlines and private aviation companiesAircraft Technicians may work:Rotational shiftsNight shiftsWeekends and holidaysIn noisy and physically demanding environmentsPhysical RequirementsAbility to stand for long hoursClimb ladders and work at heightsLift heavy aircraft parts and toolsWork in confined spacesGood hand-eye coordination and physical fitnessSalary Range (Approx.)IndiaFresher: 20,000 - 35,000 per monthExperienced: 40,000 - 1,20,000+ per month