AutoCAD Engineer Jobs

Designation :-Autocad Design EngineerQualification:- Any Experience :- 4 Years To 5 Years Salary:- 25,000 To 30,000 Gender:- MaleJob Time:- 09:00 Am To 06:00 Pm Job Location:- Umbergaon, Gujarat Industry:- Reputed Manufacturing Industry

Design EngineerBE Mechanical- MaleExp: 2-3 YrsPressure vessel heat transfer fabrication lineAutoCAD, 2D CADSal:20 to 30 KNashik

The Estimation Engineer is responsible for preparing accurate cost estimates and tender proposals based on drawings, specifications, and BOQ.Key Responsibilities:Study drawings, BOQ, and project specifications.Take quantities and prepare BOQ.Prepare detailed cost estimates and rate analysis.Develop competitive tender pricing.Identify assumptions, exclusions, and risks in the estimate.Coordinate with design, purchase, and project teams.Support bid submission and post-award budget handover.Skills Required:Ability to read drawings and prepare BOQ.Good knowledge of materials and costing.Strong analytical and MS Excel skills.Good communication and coordination.

Major Roles & Responsibilities:-Design and develop vehicle systems and componentsWork on engine, transmission, and powertrain systemsConduct vehicle testing and performance evaluationDiagnose and troubleshoot mechanical and electronic issuesUse CAD tools for design and modeling of partsEnsure compliance with safety and emission standardsSupport manufacturing and production processesAnalyze and improve vehicle efficiency and performanceCoordinate with R&D, production, and quality teamsPerform inspection and quality control checksAssist in prototype development and testingMaintain technical documentation and reports

Design and analyze structural components using engineering principlesPrepare structural drawings, calculations, and reportsReview architectural designs and ensure structural feasibilityConduct site visits and inspections to monitor construction progressEnsure compliance with local building codes and safety standardsCoordinate with architects, contractors, and project managersPerform load calculations and material selectionIdentify and resolve structural issues during project executionPrepare structural drawings (RCC, steel, foundation, layout, etc.)Create detailed 2D/3D drawings using software like AutoCAD.

Design of Machining Spm and Work Holding Fixtures

A Mechanical Design Engineer develops mechanical systems, products, and components by creating 3D models and 2D drawings using CAD software (SolidWorks, AutoCAD, Creo). They take concepts from initial design through prototyping, testing, and final production, ensuring functionality, safety, manufacturability, and compliance with industry standards.

We are looking for a dedicated Design Engineer to join our team in Banur. In this role, you will be responsible for creating detailed designs and specifications for engineering projects. This full-time position requires a male candidate with a diploma and 3 to 9 years of relevant experience.**Key Responsibilities:**- **Design Development:** Create and modify engineering designs using computer-aided design (CAD) software, ensuring all technical specifications are met.- **Technical Documentation:** Prepare comprehensive technical documents and reports detailing project specifications, design processes, and any modifications made.- **Collaboration:** Work closely with other engineers and project managers to ensure design requirements align with project goals, facilitating effective communication throughout the project lifecycle.- **Prototype Testing:** Assist in the development and testing of prototypes to verify designs, making necessary adjustments based on results and feedback.- **Problem Solving:** Identify design issues and suggest innovative solutions, ensuring projects remain on schedule and within budget.- **Quality Assurance:** Conduct thorough reviews of designs and specifications to ensure compliance with industry standards and regulations.**Required Skills and Expectations:**Candidates should possess strong proficiency in CAD software and have a solid understanding of engineering principles. Strong analytical and problem-solving skills are essential, along with the ability to work collaboratively within a team. Effective communication skills are necessary to present design ideas clearly and to understand project requirements. A commitment to continuous learning and staying updated on industry trends will be important for success in this role.

Requirements: Background in Engineering, Architecture, Drafting or related field Basic knowledge of Revit, AutoCAD and other related software Can read plans and understand construction/technical concepts Good problem-solving skills and attention to detail Own computer that can run the software Stable internet connection Good English communication Willing to learn and follow instructions properly

We are looking for a skilled Civil Design Engineer based in Kalyan Dombivali, Thane, with 3 to 9 years of experience. The ideal candidate will be responsible for designing and planning civil engineering projects, ensuring they meet client specifications and regulatory standards.Key Responsibilities:1. **Project Design:** Create detailed designs for various civil engineering projects including roads, bridges, and buildings, ensuring structural integrity and compliance with safety standards.2. **Collaboration:** Work closely with architects, construction teams, and other engineering professionals to develop project specifications and resolve design issues effectively.3. **Site Assessments:** Conduct site visits to analyze conditions, gather data, and assess potential challenges, ensuring designs are practical and feasible.4. **Regulatory Compliance:** Ensure all designs adhere to local regulations, building codes, and environmental laws to prevent any legal or safety issues during construction.5. **Technical Documentation:** Prepare and maintain detailed records, reports, and specifications related to projects for quality assurance and future reference.Required Skills and Expectations:The ideal candidate should possess a Bachelor

As an Electrical Engineer, you will play a crucial role in designing, developing, and maintaining electrical systems and equipment. This position is based in Bopal, and we welcome candidates with 0 to 1 years of experience who hold a Bachelor's degree in Electrical Engineering.**Key Responsibilities:**- **Design Electrical Systems:** Develop electrical system designs that meet project specifications and comply with relevant standards. You will use engineering software to create detailed plans and layouts.- **Conduct Testing and Analysis:** Perform tests on electrical components and systems to ensure they function efficiently. You will analyze data to identify any issues and recommend improvements.- **Collaborate with Teams:** Work closely with other engineers and departments to ensure cohesive project development. Effective communication is essential for teamwork and successful outcomes.- **Troubleshoot Electrical Issues:** Identify and solve problems with electrical systems and equipment. You will apply your knowledge to find effective solutions quickly.- **Documentation and Reporting:** Maintain detailed records of design processes, tests, and outcomes. Clear documentation is essential for future reference and compliance.**Required Skills and Expectations:**Candidates should possess strong problem-solving skills to address electrical challenges effectively. A good understanding of electrical systems, circuits, and software tools is necessary. You should be able to work well in a team environment and communicate technical information clearly. Attention to detail and a commitment to quality standards are also expected. Being proactive in learning and adapting to new technologies will help you succeed in this role.

Major Roles & Responsibilities:-Assist in site supervision and daily construction activitiesInterpret and follow structural drawings and plansSupport quantity surveying and BOQ preparationMonitor material usage and ensure quality standardsConduct site inspections and report progressCoordinate with contractors, vendors, and supervisorsEnsure compliance with safety regulationsAssist in project planning and schedulingMaintain site records and technical documentationPerform basic surveying and leveling workIdentify and report on-site issues or delaysSupport senior engineers in execution and reporting

Major Roles & Responsibilities:-Assist in designing and developing electrical systemsPrepare and interpret wiring diagrams and schematicsSupport installation, testing, and commissioning of equipmentPerform troubleshooting and fault diagnosisConduct routine inspections and preventive maintenanceEnsure compliance with electrical safety standards and codesMonitor power distribution and system performanceCoordinate with senior engineers and project teamsMaintain technical documentation and reportsAssist in project planning and executionWork with tools like AutoCAD for basic designsSupport site operations and resolve on-site issues

Job Title: Design EngineerDepartment: Design / Engineering / R&DReports To: Senior Design Engineer / Engineering Manager / Technical HeadJob SummaryThe Design Engineer is responsible for developing, designing, and improving products, components, and systems by applying engineering principles, creativity, and technical expertise. The role involves creating detailed designs, drawings, and specifications while ensuring functionality, manufacturability, quality, cost, and compliance with relevant standards.Key ResponsibilitiesDesign & DevelopmentPrepare conceptual, preliminary, and detailed designs for components, assemblies, and systemsDevelop 2D drawings and 3D models using CAD softwarePerform design calculations, material selection, and tolerance analysisModify and improve existing designs based on performance, cost, or customer feedbackEngineering DocumentationCreate and maintain engineering drawings, BOMs, specifications, and technical documentsEnsure design documentation follows company standards and version control practicesSupport change management through ECO / ECN processes

Key ResponsibilitiesSystem Design & Analysis: Conceptualizing and designing mechanical parts or systems using CAD software and performing stress, heat, or fluid analysis.Production Oversight: Coordinating the manufacturing process, from raw material selection to final assembly, ensuring high-quality output.Maintenance & Troubleshooting: Conducting preventive maintenance on heavy machinery (CNC, VMC, pumps, conveyors) to minimize downtime and repair costs.Process Optimization: Implementing Lean manufacturing or Six Sigma techniques to reduce waste and increase production speed.Documentation & Compliance: Maintaining technical drawings, Bill of Materials (BOM), and ensuring all equipment meets safety and environmental regulations.Project Management: Managing mechanical projects from feasibility study through to installation and commissioning.

Key ResponsibilitiesSite Survey & Layout: Conducting initial measurements of hospital wings or factory floors to determine the best placement for heavy equipment.Structural Analysis: Calculating load-bearing capacities for floors (e.g., can a hospital floor support a massive medical gas tank or an industrial boiler?).Trenching & Piping Layouts: Designing the underground or overhead routes for gas pipelines, electrical conduits, and drainage systems.Material Selection: Choosing high-grade, non-corrosive, or clinical grade construction materials that meet healthcare sanitation standards.Contractor Management: Supervising external masons, tilers, and plumbers to ensure they follow technical blueprints precisely.Bill of Quantities (BOQ): Preparing detailed estimates of materials (cement, steel, specialized coatings) and labor costs for project bidding.

Designation :- Junior Officer-Electrical & HVACDepartment:- Engineering Qualification:- ITI Or Diploma In Electrical Engineering Experience :- 5 Years To 13 Years Salary:- As Per Interview Gender:- MaleKey Responsibilities:- i) Oversee and maintain electrical systems and HVAC operationsii) Ensure compliance with pharmaceutical industry standardsiii) Support preventive and corrective maintenance activitiesiv) Collaborate with cross-functional teams to ensure smooth operationsJob Location :- Pithampur,MPIndustry:- Manufacturing Company

Designation :- Auto Cad Or Solid Work EngineerQualification:- Engineering Degree Experience :- 1 Years To 3 Years Salary:- As Per Interview Gender:- MaleJob Time:- 09:00 Am To 06:00 Pm Job Location:- Umbergaon, Gujarat Industry:- Reputed Manufacturing Industry

Designation :- Site EngineerQualification:- Diploma Or BE/B.Tech In Civil Engineering Experience :- Fresher To 1 YearsSalary:- As per interview Gender:- Male Job Location :- Pune, Maharashtra Designation :- Site EngineerQualification:- Diploma Or BE/B.Tech In Civil Engineering Experience :- Fresher To 1 YearsSalary:- As per interview Gender:- Male Job Location :- Pune, Maharashtra

1.Develop Civil and Structural bill of material; Prepare Layouts and detail drawings.Preparation, Checking and approval of Bar Bending Schedules, co-ordination with Vendor. 2. 3D modeling of RCC foundations, Piles, Pile caps, Structural Steel using Tekla, Extraction of GA drawings. Development of RCC details, Base plate and Anchor bolts, Bill of material. 3.3D modeling, drawing extractions and Development of Structural Steel details, Piperacks, Technological Structures, Shelters, Grade Mounted platforms, Vessel mounted platforms, Pipe supports, Equipment foundations, Roads and Drains.4. Perform calculations and layouts including 2D and 3D models with adequate dimensions necessary to assist the Engineering disciplines and Fabrication/Construction personnel including preparation of topographic layouts, earthworks/excavation drawings, boreholes locations, fencing, paved roads and drainage, underground piping and foundations, architectural and conceptual building drawings, control room layouts, substation layouts, machinery shelters, service platforms, pipe racks, pump foundations, vessel and vessel platform foundations, columns and other Civil/structural drawings.5. Perform layout clash/interface checks, identify conflicts, take corrective action in coordination with other engineering discipline inputs. 6. Issue engineering drawings and layouts for Inter-Discipline Checks (IDCs) coordinate with other engineering discipline in the integration of technical data inputs. Prepare final layouts and drawings integrating inputs provided by other engineering disciplines. Consult and make recommendations to Engineers on feasibility of design plans and layouts.7. Estimation and preparation of material take offs (MTOs), review vendor drawings, ensure vendor specifications are in full compliance with contract/ project requirements. 8. Prepare Red-line markups, resolution of site queries from Construction and fabrication shop queries / TQs. Preparation of detail sketch