Technician Jobs in India

An Aircraft Maintenance Technician is responsible for inspecting, maintaining, troubleshooting, repairing, and servicing aircraft systems and components to ensure aircraft airworthiness, safety, and compliance with aviation regulations. The technician performs scheduled and unscheduled maintenance activities on aircraft structures, engines, avionics, hydraulic systems, and other critical equipment.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine, preventive, and scheduled maintenance on aircraft.Conduct pre-flight, transit, daily, weekly, and periodic inspections.Inspect aircraft structures, engines, landing gear, and mechanical systems.Ensure aircraft meet safety and airworthiness standards.Identify defects, wear, corrosion, or damage.Troubleshooting & RepairsDiagnose mechanical, electrical, hydraulic, and pneumatic faults.Repair or replace defective aircraft components.Troubleshoot aircraft systems using technical manuals and diagnostic equipment.Perform corrective maintenance and emergency repairs.Aircraft Systems MaintenanceMaintain aircraft engines and propulsion systems.Service hydraulic, fuel, pneumatic, and environmental control systems.Inspect and maintain landing gear and braking systems.Assist in avionics and electrical system maintenance.Perform lubrication and component servicing.Documentation & ComplianceRecord maintenance activities accurately in maintenance logs.Complete work orders, inspection reports, and service records.Ensure compliance with DGCA, FAA, EASA, and airline maintenance standards.Follow aircraft maintenance manuals and engineering procedures.Safety & Quality AssuranceFollow aviation safety regulations and company SOPs.Maintain a clean and organized work environment.Use Personal Protective Equipment (PPE) appropriately.Participate in safety audits and quality inspections.Report safety hazards and maintenance irregularities.Ground Support OperationsOperate aircraft servicing equipment and tools.Assist in aircraft towing and hangar operations.Coordinate with engineers, technicians, and flight operations staff.Support aircraft turnaround activities when required.Required SkillsAircraft maintenance and inspection knowledge.Mechanical and electrical troubleshooting skills.Knowledge of aircraft systems and components.Ability to read technical manuals and engineering drawings.Familiarity with aviation regulations and safety procedures.Problem-solving and analytical skills.Teamwork and communication abilities.Attention to detail and accuracy.Computer literacy and maintenance software knowledge.Educational QualificationsEssentialDiploma or Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Mechanical Engineering, or related field.PreferredDGCA-approved AME course.Aircraft Type Training Certification.Aviation maintenance certifications.Experience RequirementsFresherBasic knowledge of aircraft maintenance procedures.Practical training or apprenticeship experience preferred.Experienced1-5+ years of aircraft maintenance experience.Experience on commercial, cargo, or private aircraft.Knowledge of aircraft maintenance documentation systems.Working ConditionsAirport, hangar, workshop, and maintenance facilities.Rotational shifts including nights, weekends, and holidays.Exposure to aircraft noise and outdoor weather conditions.Physical work involving lifting, climbing, and working in confined spaces.Salary Range (India)Fresher: 25,000 - 30,000 per month1-3 Years Experience: 30,000 - 50,000 per month3-5 Years Experience: 50,000 - 80,000 per monthLicensed/Highly Skilled Technicians: 80,000+ per month

We are looking for a dedicated AC Technician to join our team in Valsad, India. This entry-level position is ideal for individuals eager to learn about air conditioning systems and provide essential maintenance and repair services.Key Responsibilities:- **Installation of AC Units**: Assist in installing different types of air conditioning systems to ensure they function correctly.- **Maintenance and Repair**: Perform regular maintenance checks and repairs on AC units to extend their lifespan and ensure efficiency.- **Troubleshooting Issues**: Diagnose problems related to air conditioning units and provide effective solutions to restore proper function.- **Customer Service**: Communicate with clients to understand their AC issues and explain the necessary repairs or services required.Required Skills and Expectations:Candidates should have a basic understanding of electrical systems and mechanical equipment. You must be comfortable working with hand tools and electrical equipment. Attention to detail is crucial for identifying problems and carrying out repairs safely. Strong communication skills are important for interacting with customers and providing them with updates on services. A willingness to learn and follow safety protocols is essential, as is the ability to work well in a team environment. The role is full-time, with a focus on practical experience and on-the-job training.

As an OT Technician, you will play an essential role in supporting operating room activities and ensuring a smooth process for surgical teams. Your responsibilities include:- **Preparing the Operating Room**: Set up and maintain a sterile environment by arranging surgical instruments and equipment as per protocols before surgeries.- **Assisting during Surgeries**: Help surgeons and nurses with instruments, sutures, and other supplies during procedures, ensuring that everything is readily available.- **Post-Operative Clean-Up**: Ensure the operating room is cleaned and disinfected after each surgery, ready for the next procedure.- **Equipment Maintenance**: Regularly check and maintain surgical instruments and equipment, reporting any malfunctions or need for repairs to the supervisor.- **Patient Care Support**: Prepare patients for surgery by helping them get ready and educating them about the procedure as needed.To succeed in this role, you should possess certain skills and meet some expectations. A background in healthcare or experience as an assistant in a medical setting is preferred but not required. Strong communication and teamwork abilities are essential, as you will collaborate closely with various medical professionals. Attention to detail and the ability to follow established procedures are crucial for maintaining safety and care standards. You should be comfortable working in a fast-paced environment and be ready to learn and adapt to new technologies and practices in surgical care.

As an MEP Site Engineer, your primary role will involve managing and overseeing mechanical, electrical, and plumbing (MEP) works on construction sites to ensure projects are completed efficiently and to the highest standards.**Key Responsibilities:**- **Project Coordination:** Work closely with project managers and other engineers to coordinate MEP activities and ensure alignment with the overall project schedule.- **Site Inspection:** Conduct regular site inspections to verify that MEP installations comply with design specifications and local codes, ensuring safety and quality are maintained.- **Technical Support:** Provide technical assistance and guidance to contractors and subcontractors regarding MEP systems, troubleshooting any issues that may arise during installation.- **Documentation:** Maintain accurate records of MEP work, including progress reports, change orders, and any site modifications, to keep stakeholders informed and uphold project transparency.- **Material Management:** Oversee the procurement and proper usage of MEP materials, ensuring that they meet the required standards and are delivered on time to avoid delays.**Required Skills and Expectations:**Candidates should possess a Bachelors degree in Architecture, Engineering, or an Advanced/Higher Diploma related to MEP systems. A minimum of 1-7 years of relevant experience is expected. Strong analytical and problem-solving skills are essential for diagnosing issues effectively. Good communication skills are required to collaborate effectively with teams and stakeholders. Familiarity with building codes, safety standards, and best practices in the industry is critical. Lastly, proficiency in relevant software tools for designing and managing MEP systems will be advantageous.

Responsible for electrical maintenance and troubleshooting of VMC/CNC machines, injection moulding machines, motors, panels, and plant electrical systems. Candidate should be familiar with wiring, sensors, electrical testing instruments, and industrial electrical maintenance practices.

We are seeking a dedicated Mechanical Engineer to join our team in Pune, India. The ideal candidate will have 2 to 4 years of relevant experience and a diploma in mechanical engineering. This full-time role requires a male candidate who is willing to work from the office. Key Responsibilities:1. Design and Development: Create and refine mechanical designs for various projects, ensuring they meet industry standards and client specifications.2. Prototyping: Build and test prototypes to evaluate their functionality and performance, making necessary adjustments based on test results.3. Problem Solving: Identify mechanical issues and develop effective solutions to enhance product performance and reliability.4. Collaboration: Work closely with cross-functional teams, including electrical engineers and production staff, to ensure seamless integration of mechanical systems.5. Documentation: Maintain accurate records of design processes, technical specifications, and project timelines to ensure transparency and accountability.Required Skills and Expectations:Candidates must possess strong analytical and problem-solving abilities, demonstrating a solid understanding of mechanical systems and designs. Proficiency in CAD software is essential for creating detailed technical drawings. Good communication and teamwork skills are necessary to work effectively with other departments. Candidates should be detail-oriented, ensuring high-quality work, and should be able to adapt to changing project requirements. A proactive attitude towards learning and improvement is also expected.

The Mechanical Engineer will be responsible for designing, developing, and testing mechanical components and systems. They will create technical drawings, analyze designs for efficiency, and troubleshoot any issues that arise during the manufacturing process. The ideal candidate should have a graduate degree in Mechanical Engineering and 0-4 years of experience. Proficiency in 3D modeling software and strong problem-solving skills are required. The role is based in Raipur, Chhattisgarh, India and is open to male candidates only.

We are seeking a male Civil Site Engineer with 0-4 years of experience to join our team in Ahmedabad, India. The successful candidate will be responsible for overseeing civil construction projects from start to finish, ensuring that they meet quality standards, safety regulations, and project timelines.Key Responsibilities:1. Supervise construction activities on-site to ensure compliance with design specifications and safety standards.2. Coordinate with architects, contractors, and subcontractors to ensure proper execution of the project.3. Prepare and review project schedules, budgets, and progress reports.4. Inspect construction sites regularly to identify potential issues and propose solutions.5. Manage project documentation and ensure all necessary permits and approvals are in place.Required Skills and Expectations:- Graduate in Civil Engineering or related field.- Strong knowledge of construction practices, materials, and methods.- Proficiency in AutoCAD, MS Office, and project management software.- Excellent communication and interpersonal skills.- Ability to work independently and as part of a team.- Willingness to work from the office and travel to project sites as needed.

Responsible for preventive and breakdown maintenance of VMC/CNC/injection moulding machines, and other plant machinery. Candidate should have hands on experience of using maintenance tools and machine fitting, alignment, bearing replacement, hydraulics, pneumatics etc.

Responsible for maintenance, repair, and fitting of sheet metal press dies used for heavy automotive parts. Candidate should have knowledge of die handling, grinding, polishing, fitting work, and measuring instruments.

Dear Doctors,Wishes and Greetings from Aspire one Consulting !!!!!!!!!We Introduce Ourselves as one of the leading Placement Consultants Based in Punjab. We provide manpower to the reputed hospitals in North India location. We have very good offers for consultant doctors in reputed hospitals. We have some urgent requirement for Consultant Doctors.Details of the Vacancies are as Below:Location :Dehradun , Haridwar (Uttarakhand )Position: Consultant Radiologist Qualification: MD/DNB/MSExperience: 0 to 10 yrsPackage: (Depends upon the experience)If you are interested kindly forward your updated CV on given mail ID with your current and expected CTC if not interested we will really appreciate if u forward this position to your collegeaus whom you find suitable for this position.We do have other opening also for Specialty and Super Specialty doctors in case any of your know one looking for a change please do refer them --Thanks & RegardsNishu

We are looking for a dedicated Aircraft Maintenance Technician to join our team in Visakhapatnam. In this role, you will be responsible for ensuring the safety and functionality of aircraft. This is a full-time position suitable for candidates with 0 to 6 years of experience and a minimum education of 12th pass.**Key Responsibilities:**- **Conduct Inspections:** Regularly check aircraft systems, engines, and components to ensure they meet safety standards and regulations.- **Perform Repairs:** Identify and fix mechanical issues, replacing defective parts to maintain optimal performance.- **Maintain Records:** Document all maintenance activities accurately to comply with regulatory standards and help with future inspections.- **Collaborate with Team:** Work closely with other technicians and engineers to assess aircraft performance and establish maintenance schedules.- **Follow Safety Protocols:** Adhere to safety guidelines to prevent accidents and ensure a safe working environment for all personnel.**Required Skills and Expectations:**- Candidates must have at least a 12th-grade education; technical courses related to aircraft maintenance are a plus.- Strong mechanical aptitude is essential, along with problem-solving skills to address maintenance challenges effectively.- Attention to detail is crucial for inspecting aircraft and keeping accurate records.- Good communication skills are needed for teamwork and reporting directly to supervisors.- A commitment to safety and adherence to aviation regulations is expected at all times. This position offers a unique opportunity to develop your skills in the aviation industry while contributing to the safety and reliability of aircraft operations.

We are looking for enthusiastic individuals to join our team as Ground Staff in Surat. This role involves providing support and ensuring a smooth experience for our customers. Key responsibilities include:- **Customer Service**: Interact with passengers, assist with check-in procedures, and answer inquiries about flights and services, ensuring a friendly and helpful atmosphere.- **Baggage Handling**: Manage and process passengers' luggage, ensuring it is safely stored and delivered while maintaining accurate records to prevent loss.- **Safety Inspections**: Conduct routine checks for safety and security, ensuring compliance with airport regulations and maintaining a secure environment.- **Communication**: Coordinate with airline staff and other departments to relay essential information regarding delays or changes, helping to minimize passenger inconvenience.- **Documentation**: Assist in preparing necessary documentation for flights and maintaining accurate records of flight operations, contributing to efficient operations.The ideal candidate should possess:- **Communication Skills**: Ability to interact clearly and effectively with customers and team members.- **Teamwork**: A collaborative mindset, willing to work closely with others to achieve common goals.- **Problem-Solving**: Strong analytical skills to address and resolve any issues that may arise during service.- **Adaptability**: Willingness to work in a dynamic environment, handling varying tasks and responsibilities.- **Organization**: Ability to manage multiple tasks efficiently while maintaining attention to detail.Candidates with 0 to 6 years of experience and a minimum educational qualification of 12th grade are encouraged to apply.

We are looking for hardworking and enthusiastic individuals to join our team as Ground Staff in Indore. This role is essential for ensuring smooth operations at our facility. Both freshers and experienced candidates (0-6 years) who have completed their 12th grade are encouraged to apply. **Key Responsibilities:**- **Customer Assistance:** Greet and assist passengers as they arrive, ensuring a welcoming experience and handling inquiries efficiently.- **Check-in Support:** Help passengers with the check-in process, including baggage handling and ticket verification, to facilitate a seamless travel experience.- **Ticketing and Documentation:** Manage the sale of tickets and prepare necessary travel documents, ensuring accuracy and compliance with regulations.- **Baggage Services:** Ensure timely handling of baggage, guiding passengers to the baggage claim area, and addressing any issues they may encounter.- **Safety Compliance:** Follow safety procedures and protocols at all times, contributing to a secure environment for both staff and passengers.**Required Skills and Expectations:**Candidates should possess excellent communication skills, both verbal and written, to interact effectively with passengers. A friendly and approachable demeanor is essential for providing great customer service. Basic computer knowledge is required for managing ticketing systems. Candidates should be organized and able to multitask in a fast-paced environment. A team player attitude and a willingness to learn are also important. Candidates must be flexible with work hours, including weekends and holidays, based on operational needs.

We are looking for a skilled MEP Site Engineer to join our team in Hyderabad. This role is ideal for individuals with 1 to 7 years of experience in mechanical, electrical, or plumbing systems. The MEP Site Engineer will be responsible for overseeing the installation, maintenance, and operation of MEP systems in construction projects.**Key Responsibilities:**- **Supervise Installation:** Ensure that all mechanical, electrical, and plumbing installations are carried out according to design specifications and industry standards.- **Quality Control:** Monitor work progress and quality, ensuring compliance with project requirements and that all installations meet safety regulations.- **Collaborate with Teams:** Work closely with architects, contractors, and other engineers to address any issues and ensure smooth project execution.- **Site Management:** Manage daily site operations, including labor and material coordination, to keep projects on track and resolve any on-site challenges.- **Provide Technical Support:** Offer technical guidance to construction teams, helping them understand MEP systems and installations.- **Documentation and Reporting:** Maintain accurate records of work performed, prepare reports on project status, and document any changes made during the installation process.**Required Skills and Expectations:**Candidates should have a strong background in MEP systems, with a degree or diploma in engineering or architecture. Proficiency in technical drawing software and project management tools is essential. Strong communication and teamwork skills are crucial, as the role demands constant interaction with various stakeholders. Candidates must be detail-oriented, able to problem-solve effectively, and manage multiple tasks efficiently. A commitment to safety and quality standards is also expected.