Quality Inspector Jobs in India

We are seeking an experienced Quality Engineer to join our team in Hisar. In this role, you will be responsible for ensuring that our products meet the highest quality standards throughout the production process. Key Responsibilities:- Conduct Quality Inspections: You will perform regular checks on incoming materials and finished products, ensuring they meet predefined specifications.- Develop Quality Control Processes: Design and implement efficient quality control procedures to minimize defects during production and enhance product reliability.- Analyze Quality Data: Collect and analyze data related to product quality, identifying trends and areas for improvement to ensure continuous quality enhancement.- Coordinate with Production Teams: Collaborate closely with production teams to address quality issues and verify that corrective actions are implemented.- Prepare Reports: Document findings from inspections and analyses, preparing detailed reports to communicate quality issues and improvements to management.Required Skills and Expectations:Candidates should possess a diploma in a relevant field and have 2 to 4 years of experience in quality engineering. Strong analytical skills are essential, as you'll need to interpret data accurately. Attention to detail is crucial to identify even minor defects. Effective communication skills are important to work with different teams and present quality findings. A solid understanding of quality standards and methodologies, such as ISO or Six Sigma, will be beneficial. You should also be proficient in using quality measurement tools and software. Male candidates are preferred for this role.

We are seeking a Quality Control Inspector to ensure that our products meet the required standards of quality and safety. This position is based in Vatva, and we prefer candidates with 1 to 3 years of relevant experience. A diploma in a related field is required, and we are looking for male candidates.Key Responsibilities:- Inspect Products: Conduct thorough examinations of products during various stages of production to identify any defects or non-conformities.- Record Findings: Document inspection results and report any issues to the production team to ensure immediate corrections are made.- Ensure Compliance: Verify that all products comply with industry standards and regulations, maintaining quality assurance protocols.- Perform Tests: Use measurement and testing equipment to check the quality and functionality of products, ensuring they meet design specifications.- Assist in Process Improvement: Collaborate with team members to suggest enhancements to production processes based on quality inspection outcomes.- Maintain Cleanliness: Ensure the inspection area is organized and clean to facilitate efficient quality checks.Required Skills and Expectations:Candidates should have a keen eye for detail and solid problem-solving abilities. Effective communication skills are crucial for reporting findings and collaborating with team members. Familiarity with quality control tools and techniques is required. A methodical approach to work and the ability to work well in a team are essential for this role. Candidates should be proactive and possess a strong work ethic to contribute positively to our manufacturing environment.

We are looking for Any Degree Graduate for Mercendiser with 3+ years experience in Tiruppur Location.Sourcing & Costing: Calculate garment costs and buy the right fabrics, yarns, and accessories.Sampling: Create and get buyer approval for proto, fit, and pre-production samples.Planning (T&A): Set up Time and Action calendars to track every step of production.Coordination: Link internal teams (cutting, sewing, packing) with external clients.Immediate Joiners Preferred.

Job Description- Exp. in Line Quality 400, 332 KV. EPC Project Quality.-Construction Project Management Project Planning & Scheduling (Primavera P6, MS Project) EPC Project Execution Cost Estimation & Budget Control BOQ, Quantity Take-Off & Billing Procurement & Vendor Management QA/QC & HSE Compliance Resource & Workforce Management Infrastructure & High-Rise Construction Transmission Line Project Execution Critical Path Method (CPM) Baseline Scheduling Recovery Scheduling Project Controls Delay Analysis Techniques (e.g., S-Curve, SPI, CPI) Stakeholder Management Cash Flow Forecasting Construction Project Management QA/QC in Civil Construction OSHASurveyor - Transmission Line Surveyor with experience in routealignment, tower spotting, and profiling for EHV transmission lines. Committed tomaintaining accuracy, safety, and timely completion of projects with strong fieldcoordination and reporting skills. AutoCAD - route mapping, tower spotting Profile DraftingSafety- Preparation and submission of daily, weekly and monthly HSE reportsPreparation and monitoring of HSE KPI reports, including manpower, man-hours, incidents, near misses,training and inspections.Preparation, investigation and closure of Near Miss ReportsIdentification and reporting of Unsafe Acts (UA) and Unsafe Conditions (UC) with corrective-action follow-up.Planning, conducting and documenting Mock Drills for fire, fall from height, electrical emergency, rescue andevacuation scenariosPreparation and maintenance of HSE Training Records, including induction, toolbox talks, work-at-height,electrical safety, lifting & rigging and emergency response.

As a Quality Engineer, you will play a crucial role in ensuring the highest standards of quality across our products and processes. Your responsibilities will include:- Developing Quality Standards: Create and implement quality standards that align with industry regulations and company goals, ensuring product compliance and customer satisfaction.- Conducting Inspections: Perform regular inspections and tests on products to identify defects or areas for improvement, helping to maintain high-quality outputs.- Analyzing Data: Collect and analyze data from inspections and tests to determine trends, performance, and areas requiring adjustments, which will inform future quality initiatives.- Facilitating Training: Provide training to team members on quality control processes and standards, fostering a culture of quality across the organization.- Reporting Issues: Document quality-related issues and communicate findings to the management team, suggesting improvements or corrective actions when necessary.- Collaborating with Teams: Work closely with production, engineering, and supply chain teams to address quality issues and implement solutions that enhance overall product quality.Candidates for this position should possess strong analytical skills and be detail-oriented. You must have a diploma in a related field and 2 to 5 years of experience in quality assurance or engineering. A solid understanding of quality control processes and tools, excellent communication skills, and the ability to work independently are essential. As this role allows for remote work, self-motivation and time management skills are also important.

Need to handle Chakan plant for Shot Blasting and Painting process.1) Need to possess following knowledge related to Painting Process Aware of surface preparation and painting related international standards like ASTM, NACE, ISO and SSPC etc. Familiar with Aramco/ ADNOC painting specifications is preferred. Aware of requirements for surface preparation by blasting for CS, SS and Al and tests for the same. Aware of climatic conditions requirements during blasting, surface preparation and painting. Aware of air quality requirements Aware of primer for Al and two main types of primers for carbon steel and their pros and cons. Aware the function of MIOs. Aware of various types of primers, paints and their pros and cons. Aware of paint preparation and application requirements. Aware of how paint coverage is achieved on sharp corners and edges. Aware of post painting tests. Aware of how the gloss of paint film can be improved Preparation of painting quality records at different stages from surface preparation to post painting. Prepare SOPs, WI, QAP and ITP for complete blasting and painting process. Propose painting scheme as per customers requirements of corrosion protection. Monitor surface preparation, painting process. Aware of how to do paint patch work (at paint damage portion) which will aesthetically also looks good. Monitoring inspection of all tests from surface preparation to post painting. Aware of air less painting. Analysis of painting rejection and rework and CAPA for the same. Monitoring of shelf life of primer and paints. Qualification of new paint cycles. Train painters for good quality painting and work efficiency. Handling of TPI. Exposure to 7 tank pre treatment, powder coating, fire proof coating is preferred. Development and auditing of Painting and Powder coating vendors. Carry out kaizen projects for cost reduction and better work efficiency. Monitor 5S and housekeeping of paint shop Prepare QMS and EHS documents, records for internal, external audit.2) Need to possess following knowledge related to Shot Blasting Processa) Equipment related Abrasive recovery system/ Dust collection system/ Blast cabinet and Work handling systemb) Operational parameters relatedMedia velocity/ Media selection (size, hardness, density)/ Impact angle/ Flow rate/ Air Qualityc) Surface cleanliness standardSA2.5/ SA3.0d) Health, Safety and Environment relatedPPEs/ Regulatory compliances/ Pre-processing requirements3) Manage Shot Blasting and Paint Shop by planning the workload on daily basis. Have handled the workers.4) Chakan plant has spring cartridge assembly facility, which involves, robot welding set up.The candidate need to oversee spring cartridge assembly also.5) Good Verbal and written communication skill.Education ------ Dip Mech/ BE Mech/ Dip in Paint Technology and NACE Level 2 qualification for Painting Process is must.Experience ----- Around 9 years.CTC -------------- To suit qualifications, experience.

Casting & Dimensional inspectionDefect identificationDrawing interpretationMeasuring instrumentsVisual inspectionHardness testingQuality documentationRoot cause analysisProduction coordination

Urgently require a Quality Engineer Press shop and weld shop male candidates for Pali Sohna road plant ,who has good knowledge of auto industries tooling fabrication and assemblies ,please share your resume or call thanks .,Urgently require a Quality Engineer Press shop and weld shop male candidates for Pali Sohna road plant ,who has good knowledge of auto industries tooling fabrication and assemblies ,please share your resume or call thanks

K9HR SOlUTIONS, Nidhi Jethva(HR Manager - Mo. No. 93134 66308 Email ID : hr02@k9hr.com) is looking for Quality Control Inspector as follows:A Quality Control (QC) Inspector at a rotavator (rotary tiller) manufacturing company checks raw metals, welded frames, gearboxes, and rotor blades to ensure they meet exact engineering blueprints and safety rules. They test parts, stop bad items from moving forward, and write daily inspection logs.Required Skills and ToolsReading Drawings: Know how to read technical blueprints and engineering plans.Measuring Tools: Use Vernier calipers, micrometers, height gauges, thread pitches, and hardness testers.Process Knowledge: Understand basic metal cutting, sheet metal forming, welding standards, and gear-box assembly.Communication: Tell shop floor supervisors right away if a machine tool makes bad parts.Job RequirementsEducation: Diploma in Mechanical Engineering or ITI in Machinist/Fitter, plus high school graduation.

K9HR SOlUTIONS, Bansi Vanpariya (HR Manager - Mo. No. 90999 71251 Email ID : hr028. k9hrs@gmail.com) is looking for Quality Control (QC) professional inspects and tests products to ensure they meet quality standards, identifies defects, maintains quality records, and works with production teams to improve product quality.

Expectations from candidate are as followsPosition is based at Rabale, Navi Mumbai plant.Shall be responsible for product quality of following products manufactured

Transmission Line Quality Engineer-Required Exp. - On Project Quality Tower Transmission Project EPC , Line Quality 5-12 yrs of Exp. Required in Line Quality project Management, EPC Projects, Project Handling , all Knowledge of Quality Standards.

Required Candidates from Transmission tower line ,EPC project ,Quality strengthened the Systemic approaches towards ZEROdefect /ZERO Customer Complaints , 98% Reduction in customer complaints,QA ,QMS IMS responsible for the entire QA function, SupplierQuality, Plant Quality, Process Quality, Product Quality, Outgoing Quality, Customer Quality, QMS & IMSImplementation,A structured and planned monthly meeting with the Customers. Take up the training of the Sub-ordinate employees and mentor them to enhance their performance. Production management with daily target monitoring for out-put as well as Quality. Administer the Incoming Quality, In-process Quality and outgoing quality. Handle the supplier selection, up gradation and development emphasizing on enhancing the productivity andprofitability of the organization. PPM reduction (Internal & External both) through various CFT

We have vacant of 1 Process Quality Engineer Job in Faridabad Experience Required : 2 Years Educational Qualification : B.Tech Skill Process Control, Inspection, Documentation, Quality Adherence, Problem Solving, Autocad 3d, Autocad 2d, tools knowledge, t etc.

We are looking Diploma / B.E(Mech) for Quality Inspection Engineer with 0 to 3 years experience in Coimbatore Location.Fare Accommodation and Transport and Subsidiary Food .Immediate Joiner Preferred.

We are looking Diploma / B.E Mech for Quality Control/Line Inspector/VMC/CNC Operator with 0 to 3 years experience in Coimbatore location