Welding Inspector Jobs

Position: Welding QC Inspector (Saudi Aramco Approved)Location: Saudi ArabiaEmployment Type: Full-TimeJob SummaryWe are seeking an experienced and Saudi Aramco-approved Welding QC Inspector to join our Oil & Gas project team. The successful candidate will be responsible for ensuring that all welding and fabrication activities comply with Saudi Aramco requirements, approved procedures, project specifications, and international standards. The role includes inspection, documentation, coordination with construction teams, and ensuring quality compliance throughout the project lifecycle.Key ResponsibilitiesPerform welding inspections before, during, and after welding activities.Verify compliance with approved WPS, PQR, ITP, and project specificationsReview welder qualification records (WPQ/WQT) and ensure only qualified welders perform welding.Inspect material identification, traceability, fit-up, joint preparation, alignment, and welding parameters.Monitor preheat, interpass temperature, and PWHT activities.Conduct visual inspections and coordinate NDT activities (RT, UT, MT, PT).Review NDT reports and ensure acceptance criteria are met.Raise NCRs for non-conforming work and verify corrective actions.Prepare inspection reports, weld maps, welding logs, and quality documentation.Participate in client inspections, audits, and project quality meetings.Ensure compliance with Saudi Aramco standards, project specifications, and HSE requirements.QualificationsDiploma or Bachelor's Degree in Mechanical Engineering or a related discipline.Saudi Aramco Approval as Welding QC Inspector (Mandatory).CSWIP 3.1 or AWS Certified Welding Inspector (CWI) certification.Minimum 5 years of experience in Oil & Gas, Petrochemical, Refinery, or Pipeline projects.Strong knowledge of ASME Section IX, ASME B31.3, AWS D1.1, API standards, and Saudi Aramco requirements.Ability to read isometric drawings, fabrication drawings, P&IDs, and welding symbols.Good communication, reporting, and documentation skills.Preferred SkillsExperience in piping, structural steel, pressure vessels, and static equipment.Familiarity with SAP, MS Office, and QA/QC documentation systems.Excellent problem-solving, teamwork, and coordination skills.BenefitsCompetitive salary packageCompany accommodation or housing allowanceTransportation providedMedical insuranceAnnual leave and air ticket as per company policyLong-term project opportunity

Key ResponsibilitiesDimensional Measurement: Perform layout inspections, first-article inspections (FAI), in-process checks, and final inspections on engineering components using standard precision instruments.Instrument Operation: Expertly handle manual and digital measuring tools including Vernier Calipers, Micrometers, Height Gauges, Bore Gauges, Slip Gauges, and Bevel Protractors.Advanced Equipment Setup: Set up and operate advanced metrology equipment such as Coordinate Measuring Machines (CMM), Profile Projectors, or 2D/3D digital measurement systems (based on plant infrastructure).Blueprint Reading: Read, interpret, and accurately analyze complex engineering drawings, machining blueprints, and GD&T (Geometric Dimensioning and Tolerancing) symbols (such as concentricity, flatness, runout, and perpendicularity).Defect Segregation & Reporting: Identify out-of-tolerance parts, issue Non-Conformance Reports (NCR), and ensure defective materials are immediately tagged and segregated from the production line.Documentation & Compliance: Maintain detailed inspection reports, maintain first-article inspection records, and compile quality data for traceability and client submission.Calibration Support: Regularly verify the accuracy and calibration status of all handled measuring instruments before beginning inspection shifts.

An environmental inspector is a regulatory professional who investigates industrial, municipal, and commercial sites to ensure they comply with environmental protection laws and halt pollution. They evaluate waste disposal, test soil and water, and enforce public health regulations Certified with welding cswip

Quality Inspection in Fabrication Shop and Welding Shop

Urgently Required in Saudi ArabiaPositions Available:QC Inspector (Piping & Mechanical) 11 Nos Salary: Negotiable Location: Saudi ArabiaBenefits: Accommodation + Transportation + Medical provided by companyEligibility Criteria:Candidates should have CSWIP certification OR minimum 3-5 years of experience in Gulf countries. Contact Us: +91 9198359996 Email: resume@acme-consultants.orgACME CONSULTANTSB-1073/UP/PER/1000+/5/9357/2018

A Structural QC Inspector ensures that structural work and materials meet quality standards and specifications. This involves inspecting materials, fabrication, and construction processes, as well as monitoring welding, bolting, and other structural activities. They also maintain documentation and report any non-conformances.

Job Title: QC Welding InspectorPosition: Welding Inspector (CSWIP 3.1 Required / CSWIP 3.2 Preferred)Location: Saudi ArabiaBudget: 3000 SAR to 6000 SAR(Minimum 3-5 years experience in shutdown activities)Job Description:We are looking for an experienced QC Welding Inspector to join our team. The ideal candidate will be responsible for ensuring the quality of welding activities during shutdown operations. As a Welding Inspector, you will inspect and monitor welding procedures, review welding reports, and ensure compliance with industry standards and specifications. Your expertise will be critical in identifying potential issues and ensuring the highest level of workmanship is achieved.Responsibilities:Perform visual inspections of welded joints, checking for conformity to codes, standards, and drawings.Conduct welder qualification tests and ensure compliance with welding procedures.Review welding procedures, records, and reports.Monitor and verify welding activities during shutdown operations.Coordinate with the project team to ensure timely and accurate completion of welding tasks.Ensure welding work meets safety and quality standards.Prepare inspection reports and documentation as required.Requirements:CSWIP 3.1 certification is a must; CSWIP 3.2 certification is preferred.Minimum of 3-5 years of experience in shutdown activities and welding inspection.In-depth knowledge of welding techniques, codes, and industry standards.

Welding Inspector or Qc inspector or piping inspectorB.E/B.tech in Mechanical Engineering in a respective inspection discipline with at least four (4) years of experience in relevant inspection discipline.ORDiploma plus a minimum of eight (8) years of relevant inspection experience.Experience in oil and gas or refinery or petrochemical or powerplant .Holds a valid international certification as a welding inspector in CSWIP 3.1.

- Conduct third-party inspections at vendor sites, construction sites, and manufacturing facilities- Verify compliance with industry standards, codes, and regulations- Identify and report defects, deviations, and non-conformities- Collaborate with vendors, contractors, and internal stakeholders- Develop and implement inspection plans, procedures, and checklists

Candidate should have cleared CBT in Welding.He should have Aramco approval as a Welding Inspector and 8000 Series SAP No.Candidate should have onshore experience with offshore structures fabrication like jackets, decks, platforms, wellheads etc.He should have valid CSWIP 3.1/AWS and NDT Level II in RT, UT, MT, PT. Saudi Aramco project experience mandatory.Candidate should have his passport in hand.

Cswip 3.1, 3.2 Certificate is Mandatory 3 Years Mandatorysalary Plus + Overtimefood Accomodation Will Be Provided,transportation ,Leave Salary, Flight Ticket Provided Wehn Return After the Contract Period

Quality Inspector Knowledge about Drawing Reading , Layout inspection , Instrumentation , Welding ,fabrication , Sheetmetal

Job Description:-* Welding coordination of manufacturing operations for all welding and welding related activities described in ISO 14731 Annex B and ISO 3834-2.* Manage assigned manufacturing team members to ensure product quality, efficient work habits and on-time completion of work.* Identify, recommend and implement changes to improve productivity and quality, reduce cost, decrease scrap and product rework.* Ensure weld quality is obtained and that regulations, standards, specifications and other client requirements are satisfied

we are urgently looking for QC Welding Inspector (Equipment Manufacturing Fabrication) with NDT level 2

There is a face to face client interview is on 19th Aug 2023 - Chennai DAE in mechanical must be CSWIP 3.1with minimum 5 yrs. of experience, 3 yrs. oil and gas is a must.Contact : Vijayalakshmi

The QC supervisors/ inspectors for mechanical/marine Engineering section shall be able to undertake following:-(i) Overseeing of defect rectification of main engines and associated controlpanels.(ii) Inspection of Machinery components such as pistons, crankshaft, valves,piston rings, component casting etc during various stages of machinery overhaul.(iii) Trials of engineering machinery such as compressors, diesel engines,DAs, pumps, HP compressor, ACs etc as per laid down documents/drawings.(iv) Pressure testing, jigging and erection of pipes and valves.(v) Checking alignments and clearances between two mating components.(vi) Undertaking measurements of various mechanical components usingmechanical precision measuring equipments like calipers, screw gauges,micrometers dial gauges etc.(vii) Undertake Dimensional measurements at all stages of repair/manufacturing.(viii) Inspections of various NDT techniques such as Radiography, Ultrasoundetc applicable for engineering repairs and production methodology.(ix) Gauging of various components of Engineering equipment.(x) Chemical cleaning & proof testing (Pressure/ vacuum testing).(xi) Visuals Inspections during assembling / Fitments.(xii) Alignment checks of Engine and DAs.(xiii) In House / Onboard trials (Harbour Acceptance Trials) of equipment /machinery.

As a Welding Inspector, youll make visual and measured inspection of products to ensure conformance with standards and determine if product meets all requirements. You may inspect incoming materials or plates, outgoing materials, or fittings and weld throughout the manufacturing process.

Key ResponsibilitiesTesting & Inspection: Perform Magnetic Particle Inspection (MPI/MPT) on various components such as castings, forgings, machined parts, and structural welds using methods like Yoke, Coil, or Bench types (Wet and Dry particle testing).Defect Interpretation: Interpret and evaluate test results based on flux leakage indications. Distinguish between actual relevant defects (cracks, porosity, lack of fusion) and non-relevant indications.Pre & Post-Processing: Ensure proper surface preparation of components prior to testing (cleaning, degreasing). Oversee post-test cleaning, rust prevention, and demagnetization procedures.Equipment Calibration: Regularly set up, calibrate, and check the performance of MPI equipment, UV lights, and magnetic field indicators (Pie gauges) to maintain inspection accuracy.Documentation & Reporting: Maintain meticulous inspection logs. Generate clear, compliant Pass/Fail NDT evaluation reports, accurately marking and segregating defective components.Standards Compliance: Ensure all inspections conform to client blueprints, standard operating procedures (SOPs), and international codes (such as ASME, ASTM, or AWS standards).Collaboration: Coordinate closely with Quality Control Engineers and Production Supervisors to communicate defect patterns, helping to identify root causes in the manufacturing line.

Urgent requirement for Oman Shutdown1. API plant inspector*API 510 Mandatory*Valid NDT Level 2 in 4 methods - Mandatory*CSWIP / AWS Added advantageGeneral Requirements:*BE - 7years*Diploma - 11 Years*Attended atleast 3 shutdowns mandatory*Need medical fitnessDuration: 30 - 40 daysClient online interview will be conducted