ETABS Jobs

To manage a team of Engineers and provide them technical guidance. To perform engineering analysis and prepare calculations complying with Project Design Criteria, codes of practises and company standards. To supervise drafters in the production of engineering drawings in order to develop practical and economic designs. To participate in the preparation of all project design deliverables including layout drawings, detail drawings, schedules, specifications, data sheets, calculations requisitions, and technical tender evaluations, in accordance with the project requirements and the company procedures and standards. To ensure technical integrity of design deliverables. To ensure that all document checking and design verification tasks have been completed in accordance with the company and project procedures before formal document issue. To ensure conformance with customer requirement. To liaise with other consultants and to co-ordinate the discipline activities with the others to achieve the overall project design objectives in the most efficient manner. Attend meetings as and when required and prepare minutes of meeting. Resolve technical problems at site by liaising with in-house Engineering Team or PE directly. Prepare tender specifications and assist team to select competent vendor Manage site supervisors (RE/RTO) Support supervisors in the day-to-day execution of projects Undertake learning and development on a consistent and regular basis.

We are looking for a Structural engineer with 3+ years of experience and freshers, who can independently work with minimum guidance on both RCC & Steel structures with Civil/ BE/ B.Tech Civil/M.Tech structures. Candidate should be hardworking and proactive to complete the work assigned or to take up new works. Candidates residing in and around LB Nagar, Hyderabad are Preferred.

Requirements: Proficiency in AutoCAD and structural software (STAAD / ETABS / RCDC / SAFE / TEKLA) Skills in structural analysis, project management, and client handling Strong understanding of IS codes (1893, 875, 456, 13920) Experience in RCC & Steel Structures Responsibilities: Design RCC/Steel/PEB structures using analysis software and perform manual checks Prepare detailed structural drawings in AutoCAD Collaborate with architectural, MEP, and other technical teams Conduct site visits, inspections, and resolve on-site queries Participate in design reviews and support project coordination

We are hiring a Junior Structural Engineer to join our dynamic team! If you have at least 6 months to 1 year of experience in structural design and are skilled in STAAD.Pro, ETABS, AutoCAD, and RCDC, etc.Youll assist in designing and analysing structural systems for buildings and infrastructure, collaborating with experienced engineers and industry professionals.Key Responsibilities:Assist in structural analysis and design using STAAD.Pro and ETABSPrepare structural drawings and layouts in AutoCADPerform RCC design and detailing under supervisionSupport project documentation and design reportsConduct basic site visits and coordinate with the site teamEnsure designs meet local codes and project specificationsWhat Were Looking For: B.E./B.Tech/M.Tech in Civil or Structural Engineering 0.5 to 1+ year of relevant work experience Proficient in STAAD.Pro Connect, RCDC, ETABS, SAfe, AutoCAD Good understanding of Structural design principles Knowledge of IS codes and structural standards Strong communication and teamwork skills Attention to detail and a passion for learningWhat Youll Get:Flexible working hours for a better work-life balanceExposure to real-world projects and experienced mentorsOpportunity to grow in a supportive and technical environmentCompetitive salary based on your skills and performance

Responsibilities:Prepare 2D drawings, 3D models, and layouts using AutoCAD.Assist in Civil/Architectural project design and drafting.Work on estimation, detailing, and presentation drawings.Coordinate with team members to deliver accurate project outputs.Maintain quality and accuracy of all designs.Requirements:Diploma/B.E. in Civil Engineering/Architecture.Proficiency in AutoCAD (Revit, Etabs, StaadPro, SketchUp knowledge is a plus).Good communication and problem-solving skills.Freshers with software knowledge are welcome to apply.Why Join Us?Opportunity to work on real projects.Learn and grow with new technologies.Supportive and professional work environment.

Require Skill: STAAD Pro, Plan Win, RCDC, Safe, ETABS, AutoCAD, Writing & Verbal Communication Skill MS Excel, MS Word.Role & Responsibilities: 1. Perform structural analysis and design of buildings using the latest IS codes and engineering software tools.2. Ensure timely delivery of design deliverables as per commitments.3.Conduct site visits for reinforcement checking and coordination.4.Design steel structures and components as per project requirements.5.Prepare complete design documentation for submission and approval.6.Lead and mentor a team of junior engineers and draughtsman; assist in problem-solving.7.Coordinate and communicate effectively with architects and clients.8.Conduct structural audits and prepare detailed technical reports.9.Report work progress and scheduling updates to the Director on a daily/weekly basis.10.strong analytical and problem-solvingskills.

Assist in developing content & projects, Work on live architectural/ Design projects

Designing structures: This includes developing plans and specifications for buildings, bridges, and other infrastructure. Analyzing structural integrity: Evaluating the structural strength and stability of designs to ensure they can withstand various forces. Using specialized software: Utilizing computer-aided design (CAD) software and other analytical tools to design and analyze structures. Prepare formal structural calculation packages and prepare structural sketches and markups for drafting. Prepare fabrication drawings for all the structures designed. Hands on experience with design software such as AutoCAD , STAAD Pro + RAM connection, ETABS etc Must have strong fundamental knowledge in the Civil Structural STAAD Modelling, analysis, design and detailing B.E./B.Tech (Civil / Mechanical) Minimum 5 years of experience in similar role Strong analytical and problem-solving skills. Proficiency in structural analysis software and CAD programs. Knowledge of engineering principles and materials science. Familiarity with building codes and regulations. Ability to work effectively in teams. Excellent communication and interpersonal skills. Attention to detail and a commitment to safety.Contact Person- Deepak- 7757087059

Job Openings CADD Centre, New AliporeMiraTech Solutions, CADD Centre New Alipore, is hiring passionate trainers for the following positions:1. Civil Trainer 1 VacancyLocation: New Alipore, KolkataQualification: B.Tech / M.Tech in Civil EngineeringSoftware Proficiency:* Civil: STAAD.Pro, Revit, ETABS, Civil 3D, BIM,Experience:* 01 year in engineering design* 12 years as a trainer in a training institute (preferred)Benefits:* Industry-standard academic training salary* Incentives and additional benefits after the probation periodRole: Deliver software training to engineering students, professionals, colleges, and corporates.Apply Now: Send your CV via WhatsApp to 9051322244 or email it to careers@miratech.in

Design of concrete and steel structures according to American, European and British standards.Must have previous work Experience of software's such as ETABS, SAFE, SAP2000, STAAD PRO, AutoCAD, Revit, Office 365.Must at least 1 to 3 years' work experience in consultancy environment.Must have Master's in structural engineering.Should have excellent MS excel and word skills.Should have excellent communication skills in English both written and spoken.We are looking for Dedicated fulltime employee.Training will be provided to familiarize the employee with foreign codes of practice and design standards.

Job Title: Sr. Structural Design Engineer.Location: Maharshi Nagar, PuneEducation: BE Civil/ME Structural Engineer.Total Experience: Min. 45+ Years.Salary: 50K to 70K/ Competitive hike over the previous salary, based on performance in the interview.Require Skill: STAAD Pro, Plan Win, RCDC, CSI Safe, CSI ETABS, AutoCAD, Writing & Verbal Communication Skill MS Excel, MS Word.Role & Responsibilities: 1. To perform structural analysis and design of buildings as per latest is codes by using software tools.2. To deliver as per commitments.3. To do site visits for reinforcement checking.4. To design steel structures.5. To complete design documentation for submission purpose.6. To lead a team of junior engineers & draughtsman and troubleshoot their problems.7. To interact with architects and clients.8. To perform structural audits and report preparation.9. To report to director regarding the work schedule on daily/weekly basis.10. Strong Analytic and ProblemSolving.

Job Summary:ASB Trading and Contracting is seeking a highly skilled and detail-oriented Technical Designer with strong expertise in AutoCAD, aluminum fabrication, steel structures, and faade systems. The ideal candidate will be responsible for developing comprehensive technical drawings, preparing detailed work orders, and coordinating with project engineers and site teams to ensure accurate execution of design specifications.________________________________________Key Responsibilities: Develop detailed technical drawings and shop drawings for aluminum, glass, cladding, and steel structures using AutoCAD and related software. Prepare fabrication and installation drawings as per project specifications and industry standards. Translate architectural and structural drawings into detailed work orders for production and site execution. Coordinate with project managers, engineers, and production teams to ensure designs are feasible and within budget. Perform clash detection and resolve discrepancies between architectural, structural, and MEP drawings. Maintain design documentation and ensure drawings are updated according to revisions and project changes. Conduct regular technical checks and quality reviews of all outputs. Support the preparation of material take-offs and bill of quantities (BOQ). Ensure compliance with local and international standards related to faade and structural systems.________________________________________Required Skills and Software Proficiency: AutoCAD (Advanced proficiency) Revit or BIM 360 (preferred for 3D coordination and faade modeling) SketchUp / Rhino (for 3D conceptualization) Advance Steel or Tekla Structures (for steel detailing) Logikal / Orgadata (for aluminum system design) MS Office Suite (Word, Excel, Outlook) Familiarity with faade-specific analysis tools (e.g., Therm, Window, or structural analysis tools) is a plus.

Checking materials and work in progress for compliance with the specified requirements.Observance and making sure of safety requirements on site.Resolving technical issues with employers representatives, suppliers, subcontractors and statutory authorities.Quality control in accordance with CSIs/procedures method statements, quality plans and inspection and test plans, all prepared by the project management team and by subcontractors.Liaising with company or project purchasing department to ensure that purchase orders are adequately defined as per the specified requirements.Measurement and valuation (in collaboration with the project quantity surveyor where appropriate).Providing data in respect of variation in orders and site instructions.Preparing and recording drawings, technical reports site diary and estimation of the project (detailed and abstract).Rate analysis of labour and activities.Monitoring labour strength and material movement at site.Updating measurements of work completion on daily basis and reporting to the office.Co-ordinating with the meetings between Architects, Clients & Engineer.Labour workforce management as required.

Job descriptionWorking Engineer (WE) will be part of an engineering team providing engineering services to large and small projects. WE is responsible for engineering in a 3D environment and production of 3D models and 2D drawings in accordance with project requirements under the supervision of the Project Engineer (PE). WE is required to apply specialized and/or advanced engineering principles at conceptual and detailed level. The WE participates in a wide range of projects and the activities include modeling and drafting for detailed engineering phase for multi-disciplinary projects.Experience1-2 years of experience in relevant design discipline Experience in engineering packagesQualificationPostgraduate or graduate in an engineering disciplineKey Responsibilities1. Assist the PE with the delivery of project requirements as they relate to scope, quantities, quality, cost and schedule 2. Responsible to work in an integrated 3D environment and produce design calculations, reports, specifications, evaluation reports, technical recommendations and, 3D models and 2D drawings as per project requirements 3. Produce and maintain technical and engineering deliverables using 2D and 3D engineering software as required 4. Facilitate the sharing of technical expertise across projects including archival of project documents. 5. Provide and/or participate in training for resources assigned to the project 6. Perform conceptual layout work 7. Develop design details, prepare / extract drawings and check the deliverables prior to release 8. Ensure coordination with engineers within the discipline and with other disciplines 9. Co-ordinate and review clash detection in an integrated model with other discipline engineers and resolve issues if any 10. Participate in formal engineering review processes 11. Review vendor drawings and documents including archival and inputs to other disciplines 12. Represents the discipline during site visit / client meetings as felt necessary

Looking for a trainer with good knowledge of the software mentioned above, with practical knowledge. If you have any doubts, feel free to contact us at 6369626831

Company Overview:Bootes Impex Tech Ltd. is a leading construction company based in Gurugram, India. As India's 1st NET-ZERO company, we are dedicated to accelerating India's transition towards a sustainable and selfsufficient future. Our expertise lies in turn-key projects and sustainable building practices, including energy efficiency, renewable energy integration, and zero liquid discharge systems. At Bootes, we combine cutting-edge technology with ancient Indian architectural wisdom to create innovative and environmentally friendly infrastructure. Position Overview:We are seeking a skilled and experienced Structural Engineer (RCC & Steel Structure) to join our team The ideal candidate will be responsible for designing, analyzing, and ensuring the safety and stability of structures, such as RCC and steel structures. Roles and Responsibilities: Design and analyze structures to ensure they can withstand external forces and meet safety standards Analysis and Design of simple to complex Steel Structures (PEB) by using STAAD Pro V8i programs. Also review the the structure drawings from other consultants and provide the technical support if required. Collaborate with architects, contractors, and other engineering teams to integrate structural designs into overall project plans Review and approve construction plans to ensure they adhere to established design principles and safety regulations Conduct site visits to assess the progress of construction and address any structural concerns that may arise. Provide technical support and guidance to junior engineers and drafters Qualification: Bachelor's degree in civil engineering or a master's degree. Proficiency in structural analysis software (STAAD PRO, ETABS, AutoCAD) and any connection design software. Strong knowledge of engineering principles, building codes, and regulations. Excellent analytical and problem-solving skills Minimum 8 years of experience in structure

Design structures, such as buildings. Create structural models by using computer-aided design software Measure loads and pressures caused by environmental or human influence. Follow construction safety guidelines. Choose appropriate materials based on structural specifications. Monitor on-site construction processes and supervise construction workers. Prepare and allocate budgets. Track and report on project progress. Collaborate with contractors and project managers. Should have good command over softwares like STAAD PRO,ETABS,SAFE,STAAD Foundation.

H.R.7417-58-3530*Responsibilities:*- Design and analyze structures for residential, commercial, and bridge projects.- Collaborate with architects and engineers to ensure designs meet standards and client requirements.- Prepare technical drawings, specifications, and reports using AutoCAD for steel structures, trusses, and Pre-Engineered Buildings (PEB).- Provide support to construction teams during implementation, ensuring structural integrity and safety.- Stay updated on industry trends, codes, and regulations related to residential, commercial, and bridge design, as well as steel structures, trusses, and PEB.*Qualifications:*- Bachelor's/Master's degree in Civil Engineering or related field.- 1-2 years of experience in structural design, with a focus on residential, commercial, and bridge projects.- Proficiency in AutoCAD for structure drafting and design.- Experience in steel structure design, truss design, and Pre-Engineered Building (PEB) design.- Proficiency in structural design software (e.g., STAAD PRO, RCDC, ETABS).- Strong knowledge of building codes and standards for residential, commercial, and bridge projects.- Excellent analytical and communication skills.

Required experience Structural engineer having through knowledge of structural design , modelling in Etabs and Staad.

Position: - Bridge Design Engineer No of Position - 03 Desired Profile: The candidates will have to design bridge projects including inspection, and repair of bridges and related structures. They work in conjunction with planners, construction managers, inspectors, local officials, and other parties to ensure the project meets all safety standards while also accommodating deadlines, budget guidelines, and other considerations. They will have to design structural plans, coordinate changes, and provide expert guidance throughout the building process. Male and Female candidates both can apply.Education and Qualifications: - Preferred Qualification will be ME/ MTech in structural Engineering. Roles and Responsibilities: - Preparing construction drawings and designs for bridges, including plans for piers, abutments, and approaches Inspecting bridges to determine their structural integrity any recommending repairs. Estimating material costs to build a bridge, including materials such as concrete, steel, and timber. Performing engineering calculations and analyses using computer models or spreadsheets to determine loads on bridge components. Inspecting bridges during construction to ensure that they are being built according to approved plans and specifications. Working with architects and contractors to ensure that all aspects of a project are completed on time and within budget. Evaluating the environmental impact of proposed projects, such as effects on wildlife habitats or wetlands. Conducting studies on traffic patterns to determine how many lanes a bridge should have or whether a new bridge is needed. Monitoring construction progress and issuing progress reports to clients.Experience: - 3 to 5 years. Relevant Experience required in :- Designing of bridge structures.Key skills: MIDAS Civil, STAAD Pro Salary Range 6 to 12 Lacs PAMode of Working: - Work from Home

To manage a team of Engineers and provide them technical guidance. To perform engineering analysis and prepare calculations complying with Project Design Criteria, codes of practices and company standards. To supervise drafters in the production of engineering drawings in order to develop practical and economic designs. To participate in the preparation of all project design deliverables including layout drawings, detail drawings, schedules, specifications, data sheets, calculations requisitions, and technical tender evaluations, in accordance with the project requirements and the company procedures and standards. To ensure technical integrity of design deliverables. To ensure that all document checking and design verification tasks have been completed in accordance with the company and project procedures before formal document issue. To ensure conformance with customer requirement. To liaise with other consultants and to co-ordinate the discipline activities with the others to achieve the overall project design objectives in the most efficient manner. Attend meetings as and when required and prepare minutes of meeting. Resolve technical problems at site by liaising with in-house Engineering Team or PE directly. Prepare tender specifications and assist team to select competent vendor Manage site supervisors (RE/RTO) Support supervisors in the day-to-day execution of projects Undertake learning and development on a consistent and regular basis.

To manage a team of Engineers and provide them technical guidance. To perform engineering analysis and prepare calculations complying with Project Design Criteria, codes of practises and company standards. To supervise drafters in the production of engineering drawings in order to develop practical and economic designs. To participate in the preparation of all project design deliverables including layout drawings, detail drawings, schedules, specifications, data sheets, calculations requisitions, and technical tender evaluations, in accordance with the project requirements and the company procedures and standards. To ensure technical integrity of design deliverables. To ensure that all document checking and design verification tasks have been completed in accordance with the company and project procedures before formal document issue. To ensure conformance with customer requirement. To liaise with other consultants and to co-ordinate the discipline activities with the others to achieve the overall project design objectives in the most efficient manner. Attend meetings as and when required and prepare minutes of meeting. Resolve technical problems at site by liaising with in-house Engineering Team or PE directly. Prepare tender specifications and assist team to select competent vendor Manage site supervisors (RE/RTO) Support supervisors in the day-to-day execution of projects Undertake learning and development on a consistent and regular basis.