Welding Technology Jobs in India

Here is a detailed and highly functional job description for an Industrial Welder. This profile is tailored for engineering, sheet metal, and structural fabrication environments, where precision, blueprint reading, and safety are paramount.Job Description: Industrial Welder / Fabricator Department: Production / Fabrication Shop / MaintenanceReports To: Welding Supervisor / Production Engineer Experience Level: 2-5 years (ITI / Welder Certification preferred)Job Purpose The Welder is responsible for joining metal components, plates, tubes, and structures using various industrial welding techniques based on blueprint specifications. This role requires a high level of manual dexterity, an understanding of metallurgy, and strict adherence to dimensional tolerances to ensure strong, defect-free welded joints that meet rigorous quality standards.Key Responsibilities1. Welding Operations & Techniques Multi-Process Welding: Set up and operate welding equipment to perform high-quality MIG (Metal Inert Gas), TIG (Tungsten Inert Gas), and SMAW (Shielded Metal Arc/Stick) welding based on the material thickness and job specifications.Machine Calibration: Adjust welding machine parameters, including current (amperage), voltage, gas flow rate, and wire feed speed, to match the specific metal type (Mild Steel, Stainless Steel, or Aluminum).Positional Welding: Execute clean and structurally sound welds in various positions, including flat, vertical, horizontal, and overhead positions.2. Fit-Up & Fabrication Support Blueprint Analysis: Read and interpret mechanical engineering drawings, welding symbols, layouts, and process sheets to determine the required weld dimensions and sequences. Pre-Weld Preparation: Clean, grind, bevel, and clamp metal pieces together to ensure a perfect fit-up. Use measuring tools like vernier calipers, pitch gauges, and squares to verify alignment before striking an arc. Tack Welding: Apply precise tack welds to temporarily secure structures in place before executing the final continuous weld bead, preventing thermal warping or distortion.3. Quality Assurance & Defect Prevention Visual Inspection: Conduct immediate post-weld visual inspections to check for common welding defects such as porosity, undercut, slag inclusion, cracks, or lack of penetration.Post-Weld Finishing: Use chipping hammers, wire brushes, and angle grinders to clean slag, remove spatter, and smooth out weld seams for a neat finish.4. Safety & Shop Floor Discipline PPE Enforcement: Operate with absolute compliance regarding welding safety gear, including auto-darkening welding helmets, leather aprons, welding jackets, and heavy-duty heat-resistant gloves.Fume & Fire Safety: Ensure the welding booth extraction systems are active and maintain a clear, hazard-free zone around flammable gas cylinders (Argon, $CO_2$, Acetylene).

Very urgent basis required Welder, all rounder technicians

Good fabricator for furniture, Ralling, grill

Designation :- WelderQualification:- ITIExperience :- 0 to 5 YearsSalary:- As per interview Gender:- MaleJob Time:- 12 Hours (Day Shift)Job Location:- Umbergaon, GujaratIndustry:- Manufacturing Industry

Ms and Ss Pipe, Sheet, Plate Welding for Food Processing Machines. Skill of Arc, Co2, Argon Welding is Must. Should Ready to Work By Hand for Pipe/ Sheet Cutting, Grinding, Finishing, Inspecting,Rough Drawing Preparation Etc. Punctual, Healthy, with Own Bike and Driving License is Must. for Any Emergency Requirement Should Work On Sites all Over India But 90% Job Work is Factory Based in Kolhapur.

Understand the engineering drawings and specifications to plan layout, assembly and welding operationsTake accurate measurements and make calculations to complete the job Lay out and position parts and assemblies according to the specificationsWeld components and assemblies using welding equipmentTest the welded surfaces for tolerance, weld quality and conformance to specificationsFabricate based on the specifications and drawings using hand tools, machine tools and welding equipment

Operate, monitor, and maintain boiler systems as per standard operating procedures.Maintain required pressure and temperature for steam generation.Perform routine checks of boiler equipment, valves, pumps, and safety devices.Record operational data such as fuel consumption, pressure, and temperature.Ensure compliance with all safety and environmental regulations.Report any malfunction, leakage, or breakdown to the maintenance team immediately.Assist in preventive and corrective maintenance of boiler and utility systems.Maintain cleanliness and housekeeping around the boiler area.Skills & Requirements:Knowledge of boiler operations and safety standards.Ability to handle shifts independently.Basic understanding of utility systems (chillers, compressors, etc.) preferred.Good communication and teamwork skills.

Freshers and Experienced Argon Welders are required for fitter positions in factory. ark welder and argon welder is first come first reserve welder.

We need these staff for our clients.

boiler operator

Job Openings for 40 Construction Worker Jobs for Freshers in Punjab Mata Nagar, Ludhiana, having Educational qualification of : Higher Secondary, Secondary School, I.T.I., B.A with Good knowledge in TIG Welding, Welding Technology, Formwork, Bar Iron Bending, Construction, Building Construction, Arc Welder, Tiles Mason, Plaster Mason, MIG Welder, Gas Welder etc.

Knowledge of production process. Read and interpret design. Assist Senior/Manager to meet production deadline.

Hiring for 2 Arg Welder Jobs in Ahmednagar, for Freshers,Required Educational Qualification is : Higher Secondary, Secondary School with Good knowledge in Welding Metallurgy, Welding Technology etc.

Dear Candidates,We are hiring for MIG Welder position as per below:-Role: -MIG WelderTotal No of Position: - 50 NosJob Location: -Hosur, Near BangaloreIndustry: - AutomobileShift: - General ShiftEducation: - ITI (Welding)Payroll: - Kanpeki Workforce Pvt LtdSalary: - up to 22 K + Lunch + Tea Residence Arrangement: - Very close to factory (pay by self)Interested candidate can apply here or send his cv on hari.d@kanpekiworkforce.com or whats app your cv on 8587003842.thanks

No training

! , , : : 12 : 14 : +918178353682 :(link unavailable) :: : : , , : : https://www.surveymonkey.com/r/5W68SQN

! ! 100 :ITI Welder (OT) . : 18-40 : 8

Proven experience as welderExperience using a variety of welding equipment and procedures (TIG, MMA etc.)Experience in using electrical or manual tools (saws, squares, calipers etc.)Ability to read and interpret technical documents and drawingsKnowledge of relative safety standards and willingness to use protective clothing (face-shield, gloves etc.)

A leading Industrial Refrigeration System manufacturer in West Bengal is looking for dynamic Welder. Maximum age should be 30 years. Prior working experience in Industrial Products is required. Salary as per Industry. Please send your resume to operations@tempkool.org or WhatsApp to 9230978007.

Key Responsibilities1. Welding OperationsSetup and Operation: Set up, calibrate, and operate arc welding equipment (e.g., SMAW/Stick, MIG/GMAW, TIG/GTAW) and related tools such as grinders, plasma cutters, and torches.Blueprint Interpretation: Read and accurately interpret blueprints, engineering drawings, and Welding Procedure Specifications (WPS) to determine the required welding technique, materials, and dimensions.Welding Performance: Perform high-quality welding in various positions (flat, horizontal, vertical, overhead, and pipe/6G) on different materials such as carbon steel, stainless steel, and alloys.Fabrication: Align, fit, and tack-weld components into final positions using jigs, clamps, and hand tools before performing the final weld.2. Preparation and Quality ControlMaterial Preparation: Prepare materials for welding by cleaning, grinding, beveling, or cutting metal surfaces to ensure a proper joint and fusion.Inspection: Visually inspect completed welds for defects such as porosity, undercut, and slag inclusions, and perform necessary repairs or re-welding to meet quality specifications.Testing: Assist in performing tests (e.g., destructive or non-destructive testing) on welds as required by quality control standards.Maintenance: Perform routine cleaning and maintenance of welding machines, cables, electrodes, and work area to ensure equipment is functioning safely and efficiently.3. Safety and ComplianceSafety Adherence: Strictly adhere to all safety protocols, including wearing appropriate Personal Protective Equipment (PPE) such as helmets, heat-resistant gloves, and safety shoes.Code Compliance: Ensure all welding work is carried out in compliance with recognized industry codes and standards (e.g., AWS D1.1, ASME Section IX).Hazard Reporting: Immediately identify and report any hazards, equipment defects, or non-compliant work practices to the supervisor.