Chemical Process Engineer Jobs in India

Instrumentation Engineer Required for FEEDJob Description:Responsible for designing instrumentation and control systems for process safety, operational efficiency, and integration with plant DCS/SCADA systems. Aligns control philosophy with process models and safety requirements.Key Responsibilities / Deliverables:Develop instrument index, control philosophy, and safety interlocks.Define sensor types, ranges, and installation requirements for hydrogen, ammonia, and CO systems.Support development of P&IDs with instrument data.Interface with process engineers to ensure proper process control and safety compliance.Participate in FEED reviews and finalization of instrument specifications.Ensure compliance with industry standards (ISA, IEC, NFPA) and safety requirements.Technical Skills:Instrumentation and process control design for chemical plants.Knowledge of DCS/PLC integration.Familiarity with safety instrumented systems (SIS).Ability to read P&IDs, loop diagrams, and process models.Understanding of measurement and control requirements for corrosive, high-pressure, and high-temperature gases.Experience:510 years in chemical process plant instrumentation or ammonia plant projects.

Maintain daily process, Maintenance, Chemical consumption log with cost. Initiate & lead improvement drive - Water Usage/Effluent Generation Reduction. Comply to regulatory & safety standards as per APPCB norms.

Responsibilities:Technical: Hands on experience in Analyses and design of Pipe racks, Technological structures, Substations, Control rooms, Shed type structures, Foundations for Process column and exchanges etc. applicable for Chemical, Petro-chemical, Refineries and Oil and Gas Industries. Candidate should be familiar with analysis and design of dynamic foundations such as Pumps, Compressors and Turbo GeneratorsGeneral: Candidate should have performed the checking of Civil and structural calculations of engineers and ensure its correctness and completeness. Candidate should have hands on in material and quantity control of Civil and Structural commodities (Concrete and Steel) Candidate should be familiar with the interface requirements with other engineering disciplines to ensure the design comply with all the plant process and layout requirements Candidate should be conversant with the provisions of Indian, American and Euro codes for civil and structural designs.Experience Level:3 - 4 years of experience in Detail Engineering of Petrochemical/ Chemical/ Refinery Projects.Qualification:BE/ B. Tech in Civil EngineeringSoftware skills STAAD Pro-Foundation 3D & MAT 3DProficient in MS Office word and Excel Willing to depute at Project office/ site office for a short time. Candidates willing to work at Kalyan.

Job Openings for 4 Production Shift Incharge Jobs with minimum 7 Years Experience in Palladam, Tirupur having Educational qualification of : B.E, B.Tech CHEMICAL / MECHANICAL with Good knowledge in Production Incharge,Manpower Handling,ISO Documentation,Chemical Process Engineer etc.

Candidate should have experience in a Petroleum Process Plant.

looking for Research & Development Role : R & D Qualification : BSc chemistry [ mandatory ] Good communication skills Gender - males Salary : 21 k Experience: 6 months to 1 year location : Lb. Nagar Contact: 8328653177

Designation : Sales HeadLocation : Ankleshwar Gujarat & MumbaiQualifications : Bachelors degree in business, marketing, or a related field. MBA is a plusExperience : 12 years of experience in sales in the chemical industry, preferably in Excipients and Speciality Chemicals Job OverviewAs the Head of Sales at Anmol Chemicals, you will be responsible for developing and executing sales strategies to achieve revenue targets, foster strong customer relationships, and contribute to the overall success of the company. The ideal candidate will have a proven track record in sales leadership within the pharmaceutical or related industry.Essential Duties and Responsibilities:* Develop and implement effective sales strategies to achieve revenue goals. Analyze market trends, identify opportunities for growth, and contribute to the development of the company's overall business strategy. Lead, mentor, and inspire the sales team to achieve individual and collective targets. Foster a collaborative and results-driven team culture. Build and maintain strong relationships with key clients and stakeholders. Work closely with the marketing team to understand customer needs and ensure customer satisfaction. Identify and pursue opportunities for market expansion and growth. Evaluate and enter new markets as part of the company's strategic objectives. Oversee sales forecasting, budgeting, and reporting activities. Implement and optimize sales processes and tools to enhance efficiency. Stay informed about the company's product offerings and industry trends. Provide insights for product development and positioning based on market feedback.Contact Person- Deepak - 7757087059ID- deepak.vijayamgmt@gmail.com

*Do not apply if you don't have at least a single skill of below mentioned skills* Hands-on experience in Textile and/or Garment Processing plants and/or labs.Thorough knowledge and experience of using chemicals and process cycle involved Pre-treatment to Finishing.Well versed with local area garment processing units (at least 15-20 units).Knowledge of product development/shade & finish matching of fabric/garment samples in lab as per customer requirement.In-depth understanding of cotton woven, knits and denim materials.Have good knowledge about dye and chemicals, Testing dyes and chemicals in lab as per standards.Evaluating, identifying and selecting products from competitors.Sound knowledge of application of enzymes, softeners and textile auxiliary chemicals in textile wet processing.Prior Experience of handling at least 3-5 members team is adding an advantage.

Job Description: Assist the sustainability lead to assess various plastic recycling technologies - Identify, understand, and evaluate plastic recycling technologies. To Identify opportunities in various biopolymer product/technology and bio composites. Assessment of various technology for sorting / segregation and cleaning of waste plastic for mechanical recycling Support for preparation of overview/prefeed documents for new projects Validate equipment data sheets prepared by consultant/ engineering contractor for various projects. Execute process design calculations for the various schemes. Assist to develop process design package using appropriate tools. Identify opportunities for product quality enhancement/ product upgradation. Participate in pilot / commercial plant trials. Understand and evaluate basic engineering design documents. Validate modifications to ensure specified standards and codes are followed in calculations. Participate in PHA/ HAZOP of new projects/ modifications. Contribute to derive value from technology network. Understand and be abreast with legislation/ regulation as and when mandated by CPCB/ MoEF, GoI.Skills and Competencies Sound knowledge regarding polymerization process and technology. Knowledge on polymer product, processing, and applications. Experience in polymer plant operation / technical service domain Knowledge of chemical engineering and process technology Ability to plan / discuss results and network under the guidance of senior colleagues. Process design calculations at Skill level Use of process calculation templates at Skill level Process simulation skills Use of Six sigma for problem solvingEducation RequiredBE/B Tech in Chemical Engineering from a reputed instituteMBA will be added advantage.Experience Required3 to 4 years of experience with at least 2 years in plant Operations / CTS

Singhania System Technologists Pvt. Ltd. is looking for Fresh/ experienced engineers (Mechanical/ Chemical) for the role of Site Engineers. The Engineers would need to supervise the erection and commissioning of Equipment supplied by the company to Cement, Steel, Power and other industries across India and overseasCandidates applying must have a degree/ diploma in Mechanical/ Chemical Engineering, with a fundamentally sound understanding of the principles of Combustion, Heat Transfer and Inertisation. Candidates must also be able to understand complex Mechanical drawings and follow checklists meticulously, with an eye for detail. Readiness to travel at a moment's notice is essential and inherent to the nature of the position. Candidates with the ability to communicate clearly (both written and spoken) shall be preferred.

We are a start-up company based out of IIT Bombay. Our company works on designing innovative solutions for semi-solid formulation manufacturing. We are currently looking for an experienced process engineer to lead the product development team. The ideal candidate should have 5 years+ experience in process design and engineering with conceptual understanding of equipment design and process controls.

Experience Required8+ years of Agrochemicals/chemicals in process engineering/technology transfer etc.JOB DUTIES AND RESPONSIBILITIES (Please mention in below table1.Process design engineering (Basic, detailing & Improvement)2.Preparation of Material balance, PFDs, heat balance and capacity calculations for product.3.Preparation of technical data sheets of reactors, heat exchangers, pumps, vessels, columns etc. as per product specific requirements and different standards.4.Preparation & review of P&IDs as per standards. Generate documents for design projects including Process Flow Diagrams (PFDs), Piping & Instrumentation Diagrams (P&IDs).5.Responsible for carrying out HAZOP as per PID and execution is done as per finalized document.6.Preparation of material balance of new products, Heat balance for various products for getting norms.7.Estimating batch size by considering product parameter and equipment size.8.Time cycle reduction and product setup.9.Implementation of cost-effective improvement projects in terms of Raw material, yield, time cycle, debottlenecking of equipment occupancy and reduction overhead & fixed cost.10.Involving in improving of safety systems viz; fire hydrants system, blanketing devices, relief devices, N2 system in clean room, heat detector systemOther DetailsQualification:BE/ B.Tech ChemicalGender -Male

Need a Chemical Plant Operator Who Operates the Distillation Unit of Naphthalene

-We are looking for a qualified Technical Sales Representative with 0-2 years of experience in the technical sales of Water Treatment and Waste Water Treatment Solutions.- The ideal candidate should have in-depth knowledge of the customer base in Western India and a strong understanding of various water treatment technologies, including STP technologies (MBBR, SBR, and MBR) and ETP technologies (Physiochemical systems, Aerobic, and Anaerobic systems).- The candidate should also possess a Diploma/Degree in Mechanical Engineering or Chemical Engineering.

Job descriptionWe urgently looking for Sales Coordinator for Chemical Division at Pawai, MumbaiJob Description :1. Experience in enquiry generation / sales coordination / market information of speciality & commodity chemical market.2. Candidates should have some knowledge of the speciality / commodity chemical market.3. Should be able to generate sales inquiries domestically, international market knowledge would be added advantage and preferable4. Should have basic knowledge of industrial applications of speciality / commodity chemicals.5. Responsible for inquiry generation, coordination and follow up with clients domestically / internationally.6. Responsible for weekly / monthly / quarterly sales report and market report generation7. Good communication in English, computer knowledge with MS Office skills8. Ready to take new tasks if provided, new business idea generation would be appreciatedCTC - 20K- 30K per MonthExperience - 5-10 yearsJob Location - MumbaiRole DescriptionThis is a full-time on-site role for a Sales Coordinator located in Mumbai. The Sales Coordinator will be responsible for day-to-day tasks associated with sales coordination, customer service, communication, and sales operations.QualificationsGraduate from Chemical Engineering/ScienceSales Coordination and Sales Operations skillsCustomer Service and Communication skillsExcellent written and verbal communication skills in English and HindiAbility to work in a fast-paced environment and meet deadlinesProficiency in Microsoft Office Suite and CRM softwareBachelor's degree in Business Administration, Marketing, or related fieldExperience in sales coordination or customer service is a plus

acancy : Process Engineer (01)Experience : 2 yearsQualification : Diploma Holder or B Tech Chemical EngineeringSalary : As per Industry Standards; No BarResponsibilities / Duties:Working on Basic, FEED or detailed engineering design complied with project requirementsPreparing process equipment and instrument related documents for project requirement within a given time framePreparation & checking of process equipment & instrument data sheetDevelop sizing calculations for Process equipment s (Pumps, Heat Exchangers, distillation columns, compressors, separators, reactors etc.) and provide information in the form of equipment data sheet.Providing design inputs to CAD team.Review design documents / drawings prepared by the design teamPrepare and review process specifications, drawings (PFD, PID s etc.) and process deliverables mainly as listed below:Process Design basisProcess flow diagramsHeat and mass heat balancePI diagramsMaterial selection diagramsLine listEquipment listProcess data sheets for equipment sInstrument data sheetControl philosophyCause effect sheetsSkills Required:B. Tech/Diploma in Chemical Engineering with around 2 years experience in Process Design and EngineeringSound technical understanding of chemical engineering principles/Units operationsExperience in design of chemical process & equipment (such as sizing of safety valves, agitators, pumps & pipelines, reactor vessels and tanks, heat exchangers).Should be able to perform design calculations without the need of design/simulation software.Should be able to work on Process Engineering and work out Project CAPEX and OPEXGood communication skills, both verbal and writtenIndustry Preference: Distillery, Ethanol, Power, Chemical Plants. Must have worked with some design engineering consultants.

Job descriptionWe Have Multiple Positions Available in Agrochemical MNC. Kindly advise for your best matching position1.Instrument technician2.Electrician3.QC chemist4.Mechanical engineer maintenance5.Utility operator6.Safety manager AMRequired Candidate profile7.Process manager chemical8.R & D Synthesis9.R & D Executive10.Utility engineerIf anyone relate this profile please share me your cv at